Commute Time
Date Posted
Title
Job Type
Benefits
Pay
1485 Weld jobs in Tulsa,OK
New, Posted 1 day ago
Apply Directly
Welder - Hiring Now
Roxtec
Tulsa, OK 74116
OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Strong written and verbal communication skills in English
- Excellent mechanical aptitude required.
- Ability to read and understand mechanical (CAD) drawings.
- Ability to use basic measuring & inspection tools such as: measuring tape, square, calipers, go / no go gauges & radius gauges.
- Must have a strong focus on safety and quality.
- Ability to work with minimal supervision on assigned tasks.
- The successful candidate will have 90 days after their initial hire date to pass the required welder qualification test according to Roxtec International standards. If this requirement is not met within 90 days of the hire date, employment will be terminated with Roxtec Inc.
- Completion of high school or equivalent
- Minimum 3 years welding & fitting experience or formal welder & fitting training from an accredited school
- Required to wear PPE
- Close visual acuity with or without corrective lenses
- This position is classified as "Safety Sensitive"
- Stand - Frequently
- Walk - Frequently
- Sit - Frequently
- Climb - Occasionally
- Crawl - N/A
- Squat or Kneel - Occasionally
- Bend - Frequently
- Fine Manipulation - Occasionally
- Reach Outward - Frequently
- Reach Above Shoulder - Occasionally
- Travel by car, air, or other means of public transportation - Occasionally
- 20 lbs or less - Frequently
- 20-25 lbs- Frequently
- 21-50 lbs - Frequently
- Over 50 lbs - N/A
- 10 lbs or less - Frequently
- 10-20 lbs - Frequently
- 20-50 lbs - Occasionally
- Over 50 lbs - N/A
- Applicants must be legally authorized for employment in the United States without need for current or future employer-sponsored work authorization.
New, Posted 1 day ago
Apply Directly
Welder - Hiring Now
NOV
Tulsa, OK 74131
OnsiteFlexible SchedulePaid Time OffRetirement Benefit
- Education : A high school diploma or GED is the minimum requirement, often supplemented by vocational or technical school training.
- Ability to pass a drug screen & background check.
- 5-7 years of traditional welding experience (Job Shop and Welding experience).
- Must be GTAW Certified (SMAW & GMAW certifications are a plus).
- Skills & Training : Proficiency in arc welding, brazing, and soldering is necessary. Knowledge of grinding, sand/shot blasting, and finishing to remove cast defects is common in foundry roles.
- Certifications : While not always mandatory, AWS certification is highly regarded. Specific certifications may include Certified Welder or Certified Foundry Specialist (CFS).
- Technical Skills : Ability to read blueprints/drawings; weld to specific tolerances; read and interpret Welding Procedure Specification (WPS); Knowledge of welding practices and standards such as ASME & AWS; knowledge of fabrication tools such as grinders, etc; Knowledge of High-Alloys; Stainless Steels, Mid-Alloys, and Carbon Steels; Knowledge of NCR process; Familiarity with gas shields and welding consumable specs; ability to weld in Flat/Horizontal positions; and ability to weld on an open root groove and fillet Weld.
- Per HSE requirements, you could be required to participate in medical surveillance programs.
- Must be willing and able to work flexible shifts and changing work schedule.
- Must be able to communicate in English (both written and oral) as it relates to the job.
- Work potentially will be performed in areas where harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing chemicals).
- You will be required to wear personal protective equipment such as gloves, clothing, glasses, goggles, respirator/face mask, ear plugs/muffs and safety shoes continuously for the duration of the work shift.
- Physical stature must be such that the individual can operate a machine eight (8) to twelve (12) hours per day.
- No reoccurring physical problems that could be aggravated by this type of work.
- While performing the duties of this job, the employee is required to listen to machine and tooling to ensure the machine and tooling are operating properly.
- The employee must be able to lift, pull, or push up to 50 pounds during set-ups.
- While doing set-ups and verifying measurements employee will routinely bend.
New, Posted 15 hours ago
Apply Directly
Welder - Hiring Now
Kelvion Holding GmbH
Catoosa, OK 74015
~ 19 min OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Must pass American Society of Mechanical Engineering welding test.
- Testing process and positions are subject to change and are given as required.
- Ability to add and subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
- Ability to use and interpret tape measures.
- Regular attendance
- Ability to arrive at work punctually
- Ability to work on-site
- Ability to work overtime.
- Ability to understand and interpret drawings, weld symbols and weld procedures
- Ability to operate pneumatic or electric grinders
- Removes metal with carbon arc gouging equipment and/or plasma gouging equipment
- Repair broken or cracked parts and fills holes.
- Maintains production record of parts and jobs fabricated as required by the Department Manager.
- Position pieces with overhead or jib cranes.
New, Posted 1 day ago
Apply Directly
Fitter/Welder
Arcosa
Tulsa, OK 74145
New, Posted 1 day ago
Higher-Hire
Back Welder
Valmont Industries
Claremore, OK 74017
Higher-Hire
Welder Helper
Aerotek
Broken Arrow, OK 74012
New, Posted 1 day ago
DiversityJobs
General Laborer, Warehouse (Nights)
Coca Cola Southwest Beverages
Okmulgee, OK 74447
New, Posted 1 day ago
Apply Directly
Welder B - 1st shift
Hubbell Incorporated
Broken Arrow, OK 74014
~ 16 min Onsite
- Must have one (1) year experience in welding or minimum of six (6) months as a Welding C.
- Basic reading, writing, and arithmetic skills normally acquired through a high school diploma or GED.
- General knowledge of precision measuring instruments.
- General understanding of basic welding operations
- Must be able to read and interpret blueprints and drawings.
- Ability to apply common sense understanding to carry out detailed but involved written or oral instructions.
- Ability to deal with problems involving a few concrete variables in standardized situations.
- Ability to prioritize workload and complete tasks in a timely manner
- Knowledge of proper use of safety equipment, i.e. safety glasses, ear plugs, and work boots where necessary.
- Standing at one station for up to two hours at a time
- Work in welding hood, gloves, safety glasses, and other proper welding protective equipment.
- Work in temperatures of up to 100 degrees at times.
- Occasionally stoop, kneel, or crouch.
- Use of hands and arms to reach for, grasp and manipulate objects.
- Work usually takes place in a manufacturing environment where conditions can be reflective of the outside elements.
Fab Shop Pipe Welder - (Catoosa, OK.)
Matrix Service Company
Catoosa, OK 74015
New, Posted 1 day ago
Easy Apply
Fabricator
TRC Talent Solutions
Tulsa, OK 74145
$18/hr
OnsiteRetirement Benefit
- Previous experience in a production environment
- Ability to read, understand, and communicate paperwork and labels
- Ability to read and understand basic mathematical measurements and effectively use a tape measure
- Ability to work in all areas of production
- Ability to lift 75lbs unassisted
- Ability to lift 150lbs in a team two-person lift
- Ability to stand on feet for long periods of time
- Ability to work in a non-climate-controlled environment
- Ability to work independently or in a team environment
What companies are hiring Weld jobs in Tulsa,OK?
- Roxtec
- NOV
- Kelvion Holding GmbH
- Arcosa
- Valmont Industries
- Aerotek
- Coca Cola Southwest Beverages
- Hubbell Incorporated
- Matrix Service Company
- TRC Talent Solutions
- Roxtec
- NOV
- Kelvion Holding GmbH
- Arcosa
- Valmont Industries
- Aerotek
- Coca Cola Southwest Beverages
- Hubbell Incorporated
- Matrix Service Company
- TRC Talent Solutions
What is the hourly salary range for Weld jobs in Tulsa,OK?
The hourly salary range is $18 - $18.
The hourly salary range is $18 - $18.
