Commute Time
Date Posted
Title
Job Type
Benefits
Pay
1914 Structural Welding jobs in Chesapeake,VA
New, Posted 15 hours ago
Apply Directly
Welder - Submarine Building
NASSCO
Norfolk, VA 23523
~ 16 min Onsite
- Have a working knowledge and understanding of welding standards, such as Tech-Pub-278, Tech-Pub-248, MIL-STD-1689 and proper joint designs IAW MIL-STD-22D.
- Have the ability to weld all types of materials, to tig and stick, weld plate, pipe including piping joints such as sockets, butts,E.B rings, backing rings and open butts.
- Have experience with various metals such as cuni, monel, stainless steel, alum and carbon steel/cromoly.
- Be able to set up and operate welding machines such as SYNCHROWAVE 250 and POWCON ST-300.
- Be able to trouble shoot problems with tig lines and machines.
- Be able to weld with the use of a mag-base mirror for tig and stick.
- Have the ability to utilize Metro PCP 912-04 for P-I piping.
- Have knowledge of proper joint designs IAW MIL-STD-22D.
- Be able to weld different materials with stick and tig.
- Have the ability to weld pipe and plate including butts, sockets, and backing rings.
- Have experience with carbon steel/cromoly, cuni and stainless steel materials.
- Be able to operate with welding banks and some knowledge of the operation of welding machines such as SYNCHROWAVE 250 and POWCON ST-300.
- Be able to troubleshoot problems with tig lines and machines.
- Have the ability to stick weld fillet and butt joints.
- Have a willingness to learn other procedures.
- Be able to pass 6-G carbon steel pipe welding test.
- Have some knowledge of proper weld joint designs.
- Have the ability to stick weld and a willingness to learn tig.
- Ability to operate with welding banks.
New, Posted 15 hours ago
Apply Directly
Marine Structural Welder
Tidewater Staffing
Chesapeake, VA 23322
Onsite
- Ability to pass structural weld tests (as required by project)
- Ability to read blueprints and understand weld symbols
- Physically capable of lifting 50 lbs and standing for extended periods
- Knowledge of OSHA shipyard safety practices
- Reliable transportation and consistent attendance
New, Posted 1 day ago
Apply Directly
Welder - Submarine Building
Carter Machinery Co.
Norfolk, VA 23510
$1,500 bonus
~ 16 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Seeking candidates with a High school diploma or GED, required;
- Minimum one year experience welding and fabricating on heavy equipment with portable machines;
- Ability to learn how to use precision instruments (micrometers, calipers, dial indicators, etc.) is required.
- Required skills include welding, boring, fabricating, designing, salvaging and building-up equipment and/or components.
- General welding and fabrication using gas, stick, MIG and TIG welding.
- Certificate of technical training and/or knowledge in welding and machinery
- Must be able to operate, drive and maneuver construction equipment to perform needed repairs.
- Proficient computer and mathematical skills.
- Must have an excellent driving record.
- Must be able to work additional hours as needed to meet business and customer demands.
- Must be able to positively interact with supervisor and to understand problems and concerns relating to a repair.
- Must be able to perform job in sometimes stressful situations.
- Must be able to work as an integral part of a team.
- Must be able to perform under stress and/or in emergencies.
- Must be able to perform in situations requiring speed and deadlines.
- Physical requirements must be met for the Welder job, including frequently sitting for extended periods of time.
- The employees must routinely lift and/or move up to 70 pounds.
- Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.
New, Posted 1 day ago
Apply Directly
Spv I - Craft Welding
BAE Systems
Chesapeake, VA 23322
OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Must be able to obtain a government access badge
- High School or equivalent plus appropriate Trade
- 6+ years related experience with HS Diploma
- 4 + years related with associate degree
- Demonstrate the ability to plan, schedule, supervise, and direct the work of other employees in the relevant trade or industry
- Ability to use discretion and judgment in making operations and personnel decisions.
- Proficient computer skills required including experience with Microsoft Office programs and similar software.
- Good oral and written communication skills.
New, Posted 1 day ago
Apply Directly
Welder - Hiring Now
Epsilon Systems
Portsmouth, VA 23704
~ 14 min Onsite
- High school diploma/equivalent with Apprenticeship Diploma and additional vocational courses or technical school graduate;
- And/or military and/or civilian experience with welding operations in a repair department or shipyard or fabrication shop.
- 5 years' experience as a welder.
- Qualifies as a Welder/Workmanship Inspector in accordance with Epsilon Systems -Mission Readiness Group Work Instructions and welding procedures.
- Must be able to understand and perform the basic set up, adjustment, and operation of various welding equipment and hand tools used in the trade.
- Ability to obtain and maintain access to US Navy ships and government facilities.
- Ability to travel.
- Ability to communicate effectively, work independently or in a group.
- Ability to do basic math, i.e. add, subtract, divide and multiply.
- Ability to read, write, speak, and comprehend English.
- Involves heavy lifting, frequent stooping or bending and possible working assignments in overhead structures, confined spaces or beneath machinery.
- Work conditions vary from indoors to outdoor, very hot to very cold.
New, Posted 1 day ago
Apply Directly
Welder - Hiring Now
IMIA, LLC
Portsmouth, VA 23704
~ 14 min OnsiteHealth InsuranceRetirement Benefit
- High school graduate, or GED
- Must have own basic skill related tools and equipment if not supplied by the workplace
- Experience with steel, aluminum and/or stainless steel required
- Six months to one-year related experience and/or training
- Ability to follow instructions given both verbally and in written form
- Knowledge of welding equipment and associated tooling including proper set up and use
- Ability to read and interpret documents furnished in written, oral, diagram or schedule form including but not limited to safety rules, operating and maintenance instructions, quality manuals and procedure manuals
- Familiarity with the metric system
- Pass substance abuse testing
- Must be able to lift raw materials, final products, and items packed for shipment, manually (up to 60 pounds) or using a hoist
New, Posted 1 day ago
Apply Directly
Welder - Submarine Building
Delphinus Engineering
Norfolk, VA 23510
$17-$33/hr
~ 16 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Typically requires 1-5 years related experience.
- High School Diploma or GED, plus technical/vocational training or the equivalent combination.
- Thorough knowledge of welding standards of SMAW, GMAW, GTAW and/or FCAW welding procedures.
- Skill to make complete penetration and complete fusion welds.
- Read and understand blueprints and specifications.
- Ability to qualify using welding procedures on plate and/or pipe.
- Must be able to successfully pass a criminal background check and obtain and maintain a security badge for all military installations and civilian shipyards as needed.
- Must have the ability to read and interpret blueprints, sketches, written technical instructions and manuals.
- Must possess working knowledge of welding procedures and tools.
- Knowledge of welding shrinkage, welding techniques and physical properties of metal.
- Must be able to pass Workmanship Inspection training.
- Must be able to read and understand material safety data sheets (MDS).
- Able to follow safety procedures.
- Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
- Math Ability: Requires basic math skills such as adding, subtracting, multiplying, division and fractions
- Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.
- Computer Skills: Must possess basic computer skills to enter data into different data basis.
- The employee must be able to pass the vision test.
- Frequently the employee is required to carry objects that might weigh up to 50 pounds.
- While performing the duties of this job, the employee is required on a regular basis to stand, walk, sit, use hands, reach with hands and arms, climb, balance, stoop, kneel, crouch, crawl, talk and/or hear.
New, Posted 15 hours ago
Apply Directly
Welder - Submarine Building
M.C. Dean
Chesapeake, VA 23322
Requires Travel
- High School Diploma or GED
- A minimum of two to three years of applicable welding experience
- ASNT NDT Level III Certification, or relevant experience.
- One (1) other relevant technical certification or qualification such as American Welding Society (AWS) Certified Welding Supervisor, AWS Certified Weld Inspector, or other.
- Read and interpret specifications
- Read and understand shipboard installation drawings, blueprints, and job orders
- Use a variety of ARC and gas welding equipment to fabricate or repair products such as foundations, cable collars, cable/pipe/vent hangers, cable tube penetrations, studs, etc.
- Weld in all positions and for all types of metals and alloys in various shapes to include pipes, structural forms, plates, sheet metal, bar stock, machinery and equipment
- Weld parts together using gas welding, or brazing and any combination of arc welding processes
- Perform thermal cutting and grinding
- Repair broken or cracked parts, fill holes, and increase size of metal parts
- Supervisory and leadership skills
- Occupation Safety Haz-Mat Certification
- Shipyard Competent Person Certification
- Aloft/Climbing / Climbing Shipyard Stairs and Ladders Certification
- Working in Confined Spaces Certification
- Training and the Ability to Safely Lift and Move Objects of 50 LBS
- Work is primarily in San Diego, CA and Norfolk, VA but you may travel for extended periods to other shipyards in the USA and to other Navy ports outside the USA
- You will work at government facilities. You must be a US Citizenship eligible for clearance.
- You must pass a background investigation
- You must have a valid driver's license
- Lifts at least 100 pounds at one time and 60 pounds for an extended period of time.
- Relocates a 12 foot stepladder without assistance.
- Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders.
- Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis.
- Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English.
- May use a standard ladder without exceeding the weight limit while carrying tools.
- Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.
- Apply general rules to specific problems to produce answers that make sense.
- Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events).
- See details at close range (within a few feet of the observer).
- Listen to and understand information and ideas presented through spoken words and sentences.
New, Posted 1 day ago
Apply Directly
Welder - Submarine Building
SEAMLESS MARINE FITTINGS
Portsmouth, VA 23704
~ 14 min Onsite
- Experience required for level II & level III welder
- 5 or more years industry experience as a welder
- Welding trade school graduate or up to two years' experience as a certified welder
- Meets all Welder qualifications and requirements
- Successful completion of Welder workmanship class
- A clear understanding of Welding safety
- Demonstrates proper use of Personal Protective equipment (PPE)
- Basic understanding of Welding principals and applications
- Demonstrate GTAW skills.
- Knowledge and understanding of filler metal selection
- Works mostly autonomously with little supervision
- Must have a clear driving record in accordance to company driving guidelines
- Clear background check and drug/alcohol screening
- Learn to weld with a rotary positioning table, adjusting settings on rotary table and weld machine after passing GTAW x-ray test with 90/10 pipe on the positioner
- Lifting: up to 50 pounds
- Adjusting or moving objects up to 50 pounds in all directions
- Lift and carry: 50 pounds for 100 feet
- Bending, stooping, walking and climbing stairs
- Moving self in different positions to accomplish tasks in various environments
- Remaining in a stationary position, often standing or sitting for prolonged periods
- Moving about to accomplish tasks
- Communicating with others to exchange information
- Repeating motions that may include the wrists, hands and/or fingers
- Operating machinery and/or power tools
- Operating motor vehicles or heavy equipment
- Assessing the accuracy, neatness and thoroughness of the job visually
- Required physical ability if mandated by customer or regulatory requirements
New, Posted 1 day ago
Apply Directly
Welder/Fitter - 28307
HII
Norfolk, VA 23510
~ 16 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Required Travel: 11 - 25%
- Security Clearance: Ability to Obtain
- Must be a U.S. citizen.
- High School education, or Trade School or equivalent
- 4 years of related experience
- Must be able to obtain medical clearance to wear a half-face respirator.
- Must have welding experience with stick welding (SMAW), Flux Core (FCAW) and Gas Tungsten Arc Welding (GTAW) processes
- Must have welding experience in all positions from 2G to 6G.
- Must have working experience reading and interpreting drawings, blueprints, weldments, technical manuals, engineering sketches, charts and/or work orders
- As well as written and verbal instruction for products to be fabricated and/or installed.
- Must be able to accurately read welding symbols.
- Must be able to accurately read measuring devices to 1/16 of an inch.
- Must be able to work outside of trade specific requirements as team projects require, assisting team members towards task completion.
- Must demonstrate applied comprehensive knowledge of quality control procedures to verify accuracy, compliance, and workmanship throughout all stages of fabrication and equipment operation.
- Must be able to follow and enforce safety procedures.
- Must be able to obtain and maintain a DoD Security clearance.
- Must have experience working in a team environment and be able to communicate effectively with others.
- Must provide hand tools and trade specific PPE per trades designation.
- Must be able to travel up to 25% when not assigned to local tasking.
- Level of Experience: Mid
- Candidate must be able to demonstrate welding ability on needed processes through X-ray qualification testing and pass with a satisfactory grade from our Quality Assurance Team within the first three weeks from start date for continued employment.
- Limited out-of-town travel, up to 25%, may be required based on contract needs and trade skill requirements.
What companies are hiring Structural Welding jobs in Chesapeake,VA?
- NASSCO
- Tidewater Staffing
- Carter Machinery Co.
- BAE Systems
- Epsilon Systems
- IMIA, LLC
- Delphinus Engineering
- M.C. Dean
- SEAMLESS MARINE FITTINGS
- HII
- NASSCO
- Tidewater Staffing
- Carter Machinery Co.
- BAE Systems
- Epsilon Systems
- IMIA, LLC
- Delphinus Engineering
- M.C. Dean
- SEAMLESS MARINE FITTINGS
- HII
What is the hourly salary range for Structural Welding jobs in Chesapeake,VA?
The hourly salary range is $17 - $33.
The hourly salary range is $17 - $33.
