Commute Time
Date Posted
Title
Job Type
Benefits
Pay
1281 Structural Welder jobs in Alabama
New, Posted 21 hours ago
Apply Directly
Welder - Hiring Now
Austal USA
Mobile, AL 36602
Onsite
- Minimum of 1 year as a B-Class Welder at Austal producing advance fillet welds or 2 years of GMAW MIG welding experience at a comparable employer
- Ability to pass A Class skills evaluation test to demonstrate welding ability for full penetration joint details
- Ability to successfully complete onboarding procedures in preparation to pass AL CV weld qualification test requirements to meet contract requirements for A Class welding on the vessel
- Demonstrated ability to weld fillets for material thicknesses 4mm- 25mm
- Demonstrated ability to weld gusset toe and wraps with minimal blending required.
- Demonstrated ability to weld frame wraps and terminations with minimal blending required.
- Demonstrated ability to weld T-Bar wraps and terminations with minimal blending required.
- Demonstrated ability to weld into corners / vertical intersections with minimal blending required
- Demonstrated ability to evaluate and correct basic weld pick up, with minimal supervision
- Demonstrated ability to terminate stich welds with minimal weld correction to address minor cosmetic or weld defects
- Demonstrated ability to weld continuously for 400mm
- Demonstrated ability to back step and sequence weld based upon provided information and/or good welding practices
- Demonstrated ability to weld multi-pass fillets with only cosmetic correction required
- Ability to take direction and follow instructions
- Good mechanical aptitude with ability to produce consistent quality
- Ability to inspect and correct basic weld pick-up without supervision
- Good listening and verbal communication skills
- Ability to work independently and as part of a team
- Problem-solving and trouble-shooting skills
- Excellent hand-eye coordination; good spatial orientation
- Ability to consistently meet production deadlines
- Ability to read and interpret and work from construction drawings, job specifications, instruction manuals, manufacturer's handbooks, change orders and contract specifications to obtain weld sizing information and material edge preparation requirements
- Ability and willingness to work with and to teach less-skilled workers
- Ability to maintain and perform routine preventive maintenance on welding equipment
- Ability to wear required PPE
- Must be able to tour all vessels and work sites
- Must have the ability to bend, squat, stoop, crawl, and kneel. Perform prolonged standing
- Lift/push/pull 50lbs to 75lbs on an occasional basis
- Lift/push/pull up to 20lbs on a frequent basis
- Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps)
- Ability to work at heights above 12' while working from ladders, scaffolding and/or man lifts
- Able to work at a variety of levels (ex. waist, eye, overhead)
- Demonstrate the ability to safely and appropriately use required tools and equipment
- Demonstrate good balance while working on uneven surfaces and maneuvering obstacles
- Possess sufficient handgrip and coordination to carry and operate tools and equipment
- Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards
- Ability to withstand cold and hot temperatures
- Ability to enter 18" x 36" openings and work in confined spaces for prolonged periods of time
- Able to respond to verbal and audible sounds/commands
- Able to utilize adequate visual skills
- Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down
- Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers
New, Posted 23 hours ago
Apply Directly
Welder II ($29.80)
BAE Systems
Anniston, AL 36201
OnsiteHealth InsurancePaid Time OffRetirement Benefit
- A minimum of one year experience with a technical background.
- Must pass GMAW overhead (4G) weld certification test in aluminum OR steel.
- Must have ability to use band saw to fabricate simple parts.
- Must have ability to recognize out-of-specification conditions and defects in weld workmanship.
- Must have ability to complete required shop floor paperwork and documentation.
- Must have ability to read and interpret drawings with weld symbols, machined features, and the UDLP/TACOM aluminum steel weld code book.
- Must have the ability to work in a team oriented work environment.
- Must be capable of wearing respiratory protective equipment.
New, Posted 23 hours ago
Apply Directly
Welder-Welded Assembly - 2nd Shift
Samuel, Son & Co (USA)
Birmingham, AL 35215
OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Experience welding in a manufacturing setting.
- Experience with MIG/TIG welding and operating robot welder.
- Ability to follow detailed instructions.
- Demonstrates a commitment to performing job tasks and responsibilities in a safe manner.
- Must be familiar with welding symbols and standards.
- Ability to adjust settings to achieve proper welds.
- Comfortable with a fast-paced environment.
- Will be required to complete a welding assessment to demonstrate welding knowledge and ability.
New, Posted 18 hours ago
Apply Directly
Welder (1st & 2nd Shift)
Hubbell Incorporated
Leeds, AL 35094
Onsite
- Welding steel and aluminum components to assemble structural forms
- Layout, align, fit and weld fabricated steel and aluminum components
- Read and understand blueprints
- Strong attention to detail regarding alignment, dimensions, and general inspection
- Perform work involving close tolerances that require constant attention while making adjustments to perform properly
- Knowledge and technique of MIG welding
- Aluminum welding experience
- Must have the ability to read a tape measure
- Ability to regularly move, twist, bend, and crouch while working
- Dependable with a good attendance record
- Mechanical aptitude
- Ability to read blue prints and weld assemblies to comply with the engineering standards
- Education: High school diploma or GED equivalent required with Vocational Training and/or Technical Education preferred
New, Posted 7 hours ago
ResumeLibrary
Welder, 2nd Shift
Reliance
Fort Payne, AL 35967
New, Posted 18 hours ago
Apply Directly
Welder - Submarine Building
Federal Signal
Leeds, AL 35094
Onsite
- High School Diploma or equivalent
- Welding skills are required
- Trade school experience preferred
- Preferred minimum of 1-year mechanical assembly experience with strong mechanical aptitude
- Ability to read blue prints and hydraulic schematics is desired
New, Posted 23 hours ago
Apply Directly
Welder, Marathon Equipment
Terex Corporation
Vernon, AL 35592
OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Requires a High School diploma or GED.
- Manually operates welding equipment to assemble products on Container, Small Container, VIP, Baler, A-Pad Mounting, Small and Large Packer, M-1000, Special Products, dewatering units, and Final Cleaning Mate Lines.
- Exams parts and measures dimensions for conformance to blueprints specifications using tape measure.
- Camps broken metal parts together with jig/vice and welds pieces using gas-welding process according to type and thickness of metal.
- Receives parts from Fabrication Department and welds into sub-assemblies. Welds sub-assemblies into final products.
- Visually inspects parts during welding process to ensure quality.
- Records and maintains inventory of parts used on lines daily.
- Completes inspection form on products and submits to Technical Service Department.
- Manually transports metal parts up to 40 pounds to/from storage area daily.
- Performs minor maintenance duties on welding equipment. Includes changing tips, gas diffusers, gas lines, rollers, etc.
- Observes all safety regulations and reports any unsafe working conditions to supervisor.
New, Posted 23 hours ago
Apply Directly
Welder Class 1
Birdon
Bayou La Batre, AL 36509
Onsite
- Must be able to read blueprints.
- Must be able to set up own equipment, tack, distribute heat evenly with a clean bead.
- Must be able to pass a Pre-Employment Mock Weld Test.
- Possess strong attention to detail in order to aid strong quality assurance program.
- Excellent math skills with the ability to read a tape measure accurately.
- Must be able to weld aluminium and carbon steel proficiently.
- Ability to fix a defected weld.
- Must be able to weld in any position (uphill, horizontal, vertical, or flat).
- If you have at least 3 years' experience as a Welder, possess a High School Diploma or GED and fundamental knowledge in marine or manufacturing industry
New, Posted 23 hours ago
Apply Directly
Welder - Submarine Building
Rogers Group
Huntsville, AL 35805
OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Valid driver's license with a clean driving record
- Pass pre-employment and random drug test
- Minimum of 1-year fabrication welding experience working with heavy truck/equipment
- Qualified applicants must be able to learn to read blueprints and fabricate metal products with little or no assistance
- Must have fabrication welding experience
New, Posted 7 hours ago
ResumeLibrary
RV Mig Welder
TRM Innovative Hearth Products
Russellville, AL 35653
Bilingual Preferred
What companies are hiring Structural Welder jobs in Alabama?
- Austal USA
- BAE Systems
- Samuel, Son & Co (USA)
- Hubbell Incorporated
- Reliance
- Federal Signal
- Terex Corporation
- Birdon
- Rogers Group
- TRM Innovative Hearth Products
- Austal USA
- BAE Systems
- Samuel, Son & Co (USA)
- Hubbell Incorporated
- Reliance
- Federal Signal
- Terex Corporation
- Birdon
- Rogers Group
- TRM Innovative Hearth Products
