Commute Time
Date Posted
Title
Job Type
Benefits
Pay
2912 Structural Engineering jobs in San Diego,CA
New, Posted 16 hours ago
Apply Directly
Designer V
General Atomics
San Diego, CA 92107
Onsite
- Typically requires an associate's degree, technical/trade school training or equivalent
- Six or more years of progressive experience using 3D CAD solid modeling
- May substitute additional work experience in lieu of education
- Six (6)+ years of progressive experience using Autodesk Revit in building or facilities environments
- Strong understanding of engineering design principles and technical drawing standards
- Working knowledge of ANSI Y14.5 drafting standards
- Proficiency in one or more technical engineering software applications (e.g., Revit, AutoCAD, Bluebeam Revu, Procore)
- Experience working within existing facilities and renovation environments
- Ability to interpret engineering calculations, sketches, and redlines
- Ability to apply new concepts accurately in a dynamic, evolving facilities environment
- Strong organizational and coordination skills
- Effective written and verbal communication skills
- Ability to work independently and collaboratively
- Ability to maintain confidentiality of sensitive facility and infrastructure information
Apply Directly
Corrosion Assessor - 27637
HII
San Diego, CA 92105
OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- High School education, or Trade School or equivalent, and 4 years of related experience.
- Must provide own hand tools as designated per trades specialty.
- Must be able to obtain and maintain CAC ID base access and DoD Secret Security Clearance.
- Must have at least 4 years of shipboard corrosion prevention experience.
- Must be able to complete training and certifications within on-hundred eighty (180) calendar days of providing direct support:
- S-CAT - Shipboard Corrosion Assessment Training by National Association of Corrosion Engineer (NACE)
- Basic UT Measurement Certification per NSTM 100, 100-2.5
- Ultrasonic Testing (UT) Level I WorldSpec Non-Destructive Testing (NDT) Training (A Division of Hellier NDT)
- Level 1 Corrosion Certification per CCAMM, Section 2, 2.2.1 and NSTM 100, 100-2.5
- Level 2 Structural Certification per SWRMC Code 242 Personnel Qualification Standard (PQS)
- SYCP - Ship Yard Competent Person Training
- NACE Level 1 Coating Training
- NACE Cathodic Protection (CP1) Training
- NAVSEA Basic Paint Inspector (NBPI) Coating Training
- Fall Protection Hands-On and Practical Demonstrations Training
- Surface Ship Structural Calculation & Ship Structure Design Training (Edward Davis, NSWCCD Code 654)
- PCMS Level 1 Maintainer and Level 2 Supervisor Certification per NAVSEA RMC CERT 05P1-17
- Travel may be required within and outside of the continental United States.
- Required Travel: 0 - 10%
New, Posted 6 hours ago
Apply Directly
Assembler - Hiring Now
Ametek
San Diego, CA 92105
OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Must require a minimum of 3 - 5 years of related experience.
- High school diploma or equivalent
- Must possess good to excellent assembly blueprint reading experience/skills.
- Must be able to use hand tools (i.e. torque wrench, drills and inspection tools).
- Ability to properly read a variety of measuring devices including rulers, tape measures, and scales.
- Must be able to communicate effectively with others.
- Basic computer skills.
- Due to the nature of Programmable Power programs and products, applicants must have the legal right to work in the U.S.
- Legally authorized to access export-controlled information and source code.
- The position requires the ability to lift 25 pounds.
- The employee is regularly required to talk or hear.
- The employee frequently is required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms.
- Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
New, Posted 18 hours ago
Apply Directly
Assembler - Hiring Now
L3 Harris
San Diego, CA 92107
OnsiteBilingual PreferredEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- High School Diploma or equivalent and a minimum of 6 years of prior relevant experience
- 2 years post-Secondary/Associates Degree with a minimum of 2 years of prior related experience
- Minimum of 6 years of SMT and Through Hole solder experience
- Able to read assembly drawings, BOM, wire list, engineering change orders, rework instructions, and process control instructions
- Able to work under Microscope
- Familiar with wiring, harness assembly, and coax cable assembly
- Tinning of components using solder pot
- Hand soldering of SMT, through-hole, fine pitch components, and wiring
- Generals clean up, epoxy, and conformal coating
- Good communication skills, both oral and written
- High level of accuracy and strong attention to detail
- Security clearances may only be granted to U.S. citizens.
- L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
- Must be able to obatin a Security Clearance
Apply Directly
Electro-Mechanical Assembler
Teledyne
San Diego, CA 92105
Onsite
- Requires a high school diploma and some degree of vocational or technical training and a minimum of 2-5 years of directly related experience.
Apply Directly
Shipfitter
IMIA, LLC
San Diego, CA 92107
$25-$34/hr
OnsiteHealth InsuranceRetirement Benefit
- Must have own basic skill related tools and equipment if not supplied by the workplace.
- Six months to one-year related experience and/or training
- Experience with steel, aluminum and/or stainless steel required.
- The position requires a working knowledge of technical to include 1689 and 1688.
- Ability to read and interpret documents furnished in written, oral, diagram or schedule form such as safety rules, operating and maintenance instructions, quality manuals and procedure manuals.
- Familiarity with the metric system
- Ability to perform simple shop math, convert decimals to factional equivalents and fractions to decimal equivalents.
- Ability to stand continuously for long periods of time.
- Ability to identify and measure material.
- Ability to follow instructions given both verbally and in written form.
- Knowledge of machines and tools, including their designs and uses.
- Ability to read blueprints, drawings, calipers, tape measures and angle gauges.
- Lift raw materials, final products, and items packed for shipment, manually (up to 60 pounds), or using a hoist.
New, Posted 1 day ago
Apply Directly
Shipfitter - Hiring Now
Department of the Navy - Agency Wide
Chula Vista, CA 91915
Requires Travel
- Must be a US Citizen.
- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
- Males born after 12-31-59 must be registered for Selective Service.
- You may be required to successfully complete a pre-appointment physical examination.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
- A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.
- You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
- Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals).
- You may be required to participate in medical surveillance programs.
- This position may require exposure to high noise levels.
- You must be able to travel on military and commercial aircraft for extended periods of time.
- The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE.
- Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations.
- Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition.
- This position is covered by the Department of Defense Priority Placement Program.
- A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee.
- A relocation incentive may be authorized.
- Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees.
- Applicants will only be considered for positions within their own UIC.
- For example: If you're within UIC 4523A, you will only be considered for positions within 4523A.
Apply Directly
CNC Setup Machinist - 1st Shift
5th Axis
San Diego, CA 92105
$28-$45/hr
OnsitePaid Time OffRetirement Benefit
- Minimum of 5 years' experience as a CNC Setup Machinist
- AA Degree or High School diploma with job experience
- Proficiency with setup sheets and understanding of G&M; codes.
- Strong ability to troubleshoot and optimize programs and tooling.
- Must be able to occasionally lift and/or carry up to 30 pounds.
- Must be able to push and/or pull up to 30 pounds.
- Must be able to continuously stand and/or walk for extended periods of time on concrete surface.
- Ability to repeatedly kneel, bend, crouch, reach and/or stoop throughout the shift as needed to successfully perform job duties.
Apply Directly
Welder - Hiring Now
Solar Turbines Incorporated
Spring Valley, CA 91977
~ 27 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- This position is for experienced welders who are able to use the necessary equipment for MIG and TIG welding of structures, enclosures, pipes, and other components, as well as general fabrication and refurbishment, and operating equipment and heavy machinery.
- Experienced welders who are able to perform open root welding.
- An employee in this position must be able to work with their peers as well as individually, and follow directions from team leads, supervisors, and managers.
- They must follow work instructions and processes, weld according to part drawings, execute tasks, and assist peers and lower level welders while remaining productive and highly efficient.
- These employees are also expected to be able to work without official drawings, using their expertise to fulfill needs of a customer.
- They must have the ability to work on the highest level of complexity parts.
- They will work with a wide range of materials, operate an array of equipment, and can handle unique challenges.
- It is expected they can meet tight tolerance requirements on parts demanding higher than usual precision.
- Must have ability to work in multiple areas of the shop and carry multiple certifications.
- Must pass and maintain required welding qualification tests.
- They must be fully able to read, comply and understand welding procedures, and must be able to climb and work from ladders, scissor/man lifts, and scaffolds.
- Must be able to recognize and avoid hazards and unsafe operation of equipment
- Proficient with a combination (not all required, but must hold multiple) of GMAW (MIG), DC/AC GTAW (TIG), FCAW (Flux Core), GMAW-P (Pulse MIG) operation
- Must be able to certify on pipe 6G position
- Must be able to certify on specified welding methods
- Proficient in welding with Duplex Material
- High School Diploma, GED, or equivalent required
- Annual eye exam required
- Annual hearing conservation exam required
- Successful completion of a welding hands-on assessment is required to qualify for an interview.
- Any offer of employment is conditioned upon the successful completion of a drug screen.
Apply Directly
Welder - Hiring Now
GKN Aerospace
El Cajon, CA 92021
$28-$32/hr
~ 20 min Onsite
- High School diploma or GED
- 5+ year welding experience in TIG welding, or successful completion of additional welding certification/education for TIG welding.
- Must be able to achieve AWS certification (AWS D17.1) on all materials to be welded within 6 months of start.
- 3+ years of TIG welding experience working with basic math and reading blueprints and meet inspection requirements in accordance with customer specifications.
- This job role requires proficiency in English, both verbal and written, that is sufficient to understand and effectively follow written safety procedures, company policies, work instructions, operations manuals, and more in a manufacturing environment.
- Reliable and satisfactory attendance is an essential job function of this role and is critical in meeting operations and business needs
- Must be a US Citizen or Green Card Holder due to program security clearance requirements and/or SSA requirements.
- Ability to read, write and comprehend English instructions
- Basic Math skills
- Manual dexterity
- Ability to stand for long periods of time
- Lift up to 50 pounds
- Withstand loud noise of a machine shop environment
What companies are hiring Structural Engineering jobs in San Diego,CA?
- General Atomics
- HII
- Ametek
- L3 Harris
- Teledyne
- IMIA, LLC
- Department of the Navy - Agency Wide
- 5th Axis
- Solar Turbines Incorporated
- GKN Aerospace
- General Atomics
- HII
- Ametek
- L3 Harris
- Teledyne
- IMIA, LLC
- Department of the Navy - Agency Wide
- 5th Axis
- Solar Turbines Incorporated
- GKN Aerospace
What is the hourly salary range for Structural Engineering jobs in San Diego,CA?
The hourly salary range is $25 - $45.
The hourly salary range is $25 - $45.
