Commute Time
Date Posted
Title
Job Type
Benefits
Pay
2303 Pipe Welder jobs in Suffolk,VA
New, Posted just now
Apply Directly
Welder - Hiring Now
M.C. Dean
Suffolk, VA 23434
Requires Travel
- High School Diploma or GED
- A minimum of three to four years of applicable welding experience
- ASNT NDT Level III Certification.
- One (1) other relevant technical certification or qualification such as American Welding Society (AWS) Certified Welding Supervisor, AWS Certified Weld Inspector, or other.
- Occupational Safety Haz-Mat Certification
- Shipyard Competent Person Certification
- Aloft/Climbing / Climbing Shipyard Stairs and Ladders Certification
- Working in Confined Spaces Certification
- Training and the Ability to Safely Lift and Move Objects of 50 LBS
- You must be a US Citizenship eligible for clearance.
- You must pass a background investigation
- You must have a valid driver's license
- Lifts at least 100 pounds at one time and 60 pounds for an extended period of time.
- Relocates a 12 foot stepladder without assistance.
- Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders.
- Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis.
- Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English.
- Tell when something is wrong or is likely to go wrong. It does not involve solving the problem.
- Apply general rules to specific problems to produce answers that make sense.
- Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events).
- See details at close range (within a few feet of the observer).
- Listen to and understand information and ideas presented through spoken words and sentences.
Jobcase
Pipelayer
Garney Construction
Suffolk, VA 23434
New, Posted 4 hours ago
Apply Directly
Welder - Hiring Now
MIlls Marine Ship Repair
Suffolk, VA 23434
Onsite
- Qualified in basic Shielded Metal Arc (SMAW) for various combinations of steel in all positions or Gas Metal Arc (GMAW) for aluminum (spray and pulsed transfer)
- Maintains certification in the welding procedure(s) as required by Quality Assurance Manager
Apply Directly
Welder - Hiring Now
Continental Tide Defense System
Suffolk, VA 23434
OnsiteRetirement Benefit
- Must possess a high school, trade or vocational school degree
- 5-10 years of direct experience in ship repair and installation of HM&E; systems and equipment
- Must have or have the ability to obtain a SECRET clearance
- Must have the ability to obtain base access and security credentials
- Ability to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs
- Ability to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces
- Travel may be required within and outside of the continental United States
- Due to export control regulations, this role is open to U.S. citizens of the US
- Demonstrated reliability and punctuality; must be able to consistently report to work on time
- Possess basic and some advanced specialized welder's tools
- Only local candidates will be considered
- U.S. citizenship is required for most positions.
New, Posted 7 hours ago
Apply Directly
Welder - Hiring Now
COLONNA'S SHIPYARD
Suffolk, VA 23434
OnsiteFlexible ScheduleHealth InsurancePaid Time OffRetirement Benefit
- Must have a Bachelors/Registered Apprentice (grad) and at least 2 years relative trades experience (or HS + 6 years trades experience) and at least 2 years of prior supervisory experience.
- Must be able to demonstrate ability to perform multi-pass, all position fillet and butt welds using SMAW (Shielded Metal Arc Welding), GMAW (Gas Metal Arc Welding), and FCAW (Flux Core Arc Welding).
- Must have knowledge of AWS D1.1 (Structural Steel) and NAVSEA code/requirements (MIL-STD-1688 & MIL-STD-1689).
- Must have both welding and fitting experience in new industrial fabrication/new construction.
- Must have at least one (1) year of experience in welding automation.
- Must be able to understand job specifications, drawings, and corresponding technical references years supervisory experience.
- Must have well-developed communication skills, both verbal and written, to effectively communicate with employees/leadership/customers and prepare/deliver written reports and correspondence.
- Must have regular, reliable attendance.
New, Posted 19 hours ago
Apply Directly
Welder
Skillit
Portsmouth, VA 23703
~ 18 min OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Journeyman welder
- OSHA 10 certification is required
- 5+ years in welding and applicable certifications
- Familiarity with operating and maintaining a range of welding tools and equipment
- Ability to read and understand blueprints, technical drawings, specifications, and safety guidelines
- Proficiency in operating various welding equipment and tools
- Knowledge of manual and mechanical welding techniques, different welding processes (MIG, TIG, Stick)
- Ability to lift at least 40 lbs. unassisted
- Ability to stoop, bend, crawl, and maneuver in tight spaces
- Manual Dexterity: May need to use fingers to grasp, move, or assemble small objects
- Education: A high school diploma or equivalent is preferred
- Safety Orientation: a strong commitment to safety protocols and the ability to comply with all federal and state safety regulations
New, Posted just now
Apply Directly
Welder - Hiring Now
HII
Chesapeake, VA 23323
Visa Sponsorship Available
~ 30 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- High School education, or Trade School or equivalent, and 6 years of experience in welding and metal fabrication in marine or industrial environments on multiple metal types
- Must provide own hand tools as designated per trades specialty
- Must be able to obtain and maintain a DoD security clearance and base access
- Must have proficiency in multiple welding positions and processes (SMAW, GTAW, GMAW, FCAW) and fabrication of structural and piping systems
- Must have the ability to read and interpret technical drawings and OEM specifications
- Must have the ability to work in Naval Bases / shipyard environments and comply with OSHA, NAVSEA, and program safety requirements
- Must have the ability to conduct torch cutting, hammer forging, grinding, sawing, and fitting of metal parts structural and piping systems as required
- Must support machinist tasks such as torch heating, flame cutting, and grinding of metal components
- Must be able to wear a respirator
- Must have basic mechanic knowledge and ability to operate various tools to support additional tasking using tools such as, socket wrenches, standard wrenches, Allen wrenches
- Must be proficient in both SMAW and GTAW welding for various materials including Carbon steel, HY/HSLA, Stainless, copper nickel and Monel
- Must be able to pass a structural X-Ray Test for SMAW (All-Positions)
- Must be able to pass a Macro-Etch for thin wall pipe (CUNI, Stainless and Carbon Steel)
New, Posted 1 day ago
Higher-Hire
TIG Pipe Welder
Aerotek
Suffolk, VA 23434
New, Posted 4 hours ago
Apply Directly
Pipe Welder
IMIA, LLC
Portsmouth, VA 23704
~ 18 min OnsiteHealth InsuranceRetirement Benefit
- High school graduate or GED
- Six months to one-year of relevant experience and/or training in aluminum welding.
- Prior experience with pipe welding is essential.
- Welding machines according to job requirements or Welding Procedure Specifications for GTAW/SMAW Pipe welding.
- Capable of manually lifting raw materials, final products, and packed aluminum items for shipment, weighing up to 60 pounds or using a hoist.
- Willingness to work for 40+ hours per week.
- Ability to understand and follow both verbal and written instructions.
- Have a working knowledge and understanding of welding standards, such as Tech-Pub-278, Tech-Pub-248, MIL-STD-1689 and proper joint designs IAW MIL-STD-22D.
- Have the ability to weld all types of materials, to tig and stick, weld plate, pipe including piping joints such as sockets, butts, consumable rings, backing rings and open butts.
- Have experience with various metals such as cuni, monel, stainless steel, alum, and carbon steel.
- Be able to weld with the use of a mag-base mirror for tig and stick.
- Be able to trouble shoot problems with tig lines and machines.
- Pipe testing will be in restricted positions.
- Proficient in reading and interpreting documents presented in written, oral, diagram, or schedule form. This includes safety rules, operating and maintenance instructions, quality manuals, and procedure manuals.
- Familiarity with the metric system.
- Capable of standing continuously for extended periods.
New, Posted 4 hours ago
Apply Directly
Welder
General Dynamics Information Technology
Suffolk, VA 23434
Requires TravelHealth InsurancePaid Time OffRetirement Benefit
- Skills: Blueprints, Welding, Welding Procedures
- Experience: 1 + years of related experience
- US Citizenship Required: Yes
- Education: High School Diploma/GED
- Required Experience: 1+ years of related experience
- Location: On Customer Site
- The eligibility requirements for continued employment in this position include, but may not be limited to, obtaining DBIDS, and access to all shipyards.
- MIG which Aluminum GMAW
- Flux core FCAW carbon steel and stainless
- Stick weld carbon steel stainless SMAW
What companies are hiring Pipe Welder jobs in Suffolk,VA?
- M.C. Dean
- Garney Construction
- MIlls Marine Ship Repair
- Continental Tide Defense System
- COLONNA'S SHIPYARD
- Skillit
- HII
- Aerotek
- IMIA, LLC
- General Dynamics Information Technology
- M.C. Dean
- Garney Construction
- MIlls Marine Ship Repair
- Continental Tide Defense System
- COLONNA'S SHIPYARD
- Skillit
- HII
- Aerotek
- IMIA, LLC
- General Dynamics Information Technology
