Commute Time
Date Posted
Title
Job Type
Benefits
Pay
1399 Pipe Welder jobs in Bixby,OK
Apply Directly
Welder - Hiring Now
Ametek
Tulsa, OK 74107
~ 21 min Onsite
- High School Diploma or GED
- Minimum 2 years of experience in TIG Welding
- Experience welding Stainless, Aluminum and Inconel
- Experience with performing own fit ups
- Proven ability to read and interpret blueprints
- Must pass weld test for appearance, penetration, bend, and x-ray on aluminum and stainless steel
- Strong troubleshooting knowledge down to component level using measuring gauges and test equipment
- Must be able to perform their own fit-ups on units they are building
- Must be comfortable using air powered tools such as die grinders, cut-off tools, belt sanders, and air drills
- Must be able to comprehend manuals and blueprints
- Must be able to read calipers and other measuring equipment
- Observed all safety and security procedures
- Uses equipment and materials properly
- Reports potentially unsafe conditions
- Must be performed with or without reasonable accommodation
- Due to contracts with the United States Government, the candidate must be either
New, Posted 1 day ago
Apply Directly
Welder - Hiring Now
Roxtec
Tulsa, OK 74116
~ 21 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Strong written and verbal communication skills in English
- Excellent mechanical aptitude required.
- Ability to read and understand mechanical (CAD) drawings.
- Ability to use basic measuring & inspection tools such as: measuring tape, square, calipers, go / no go gauges & radius gauges.
- Must have a strong focus on safety and quality.
- Ability to work with minimal supervision on assigned tasks.
- Completion of high school or equivalent
- Minimum 3 years welding & fitting experience or formal welder & fitting training from an accredited school
- The successful candidate will have 90 days after their initial hire date to pass the required welder qualification test according to Roxtec International standards. If this requirement is not met within 90 days of the hire date, employment will be terminated with Roxtec Inc.
- This position is classified as "Safety Sensitive"
- Applicants must be legally authorized for employment in the United States without need for current or future employer-sponsored work authorization.
New, Posted 1 day ago
Apply Directly
Welder - Hiring Now
Hubbell Incorporated
Broken Arrow, OK 74014
~ 19 min Onsite
- Must have one (1) year experience in welding or minimum of six (6) months as a Welding C.
- Basic reading, writing, and arithmetic skills normally acquired through a high school diploma or GED.
- Must be able to read and interpret blueprints and drawings.
- Standing at one station for up to two hours at a time
- Occasionally stoop, kneel, or crouch.
- Use of hands and arms to reach for, grasp and manipulate objects.
- Work in temperatures of up to 100 degrees at times.
Apply Directly
Welder - Hiring Now
NOV
Tulsa, OK 74131
~ 21 min OnsiteFlexible SchedulePaid Time OffRetirement Benefit
- Education : A high school diploma or GED is the minimum requirement, often supplemented by vocational or technical school training.
- Ability to pass a drug screen & background check.
- 5-7 years of traditional welding experience (Job Shop and Welding experience).
- Must be GTAW Certified (SMAW & GMAW certifications are a plus).
- Skills & Training : Proficiency in arc welding, brazing, and soldering is necessary. Knowledge of grinding, sand/shot blasting, and finishing to remove cast defects is common in foundry roles.
- Certifications : While not always mandatory, AWS certification is highly regarded. Specific certifications may include Certified Welder or Certified Foundry Specialist (CFS).
- Technical Skills : Ability to read blueprints/drawings; weld to specific tolerances; read and interpret Welding Procedure Specification (WPS); Knowledge of welding practices and standards such as ASME & AWS; knowledge of fabrication tools such as grinders, etc; Knowledge of High-Alloys; Stainless Steels, Mid-Alloys, and Carbon Steels; Knowledge of NCR process; Familiarity with gas shields and welding consumable specs; ability to weld in Flat/Horizontal positions; and ability to weld on an open root groove and fillet Weld.
- Per HSE requirements, you could be required to participate in medical surveillance programs.
- Must be willing and able to work flexible shifts and changing work schedule.
- Must be able to communicate in English (both written and oral) as it relates to the job.
- Work potentially will be performed in areas where harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing chemicals).
- You will be required to wear personal protective equipment such as gloves, clothing, glasses, goggles, respirator/face mask, ear plugs/muffs and safety shoes continuously for the duration of the work shift.
- Physical stature must be such that the individual can operate a machine eight (8) to twelve (12) hours per day.
- No reoccurring physical problems that could be aggravated by this type of work.
- While performing the duties of this job, the employee is required to listen to machine and tooling to ensure the machine and tooling are operating properly.
- The employee must be able to lift, pull, or push up to 50 pounds during set-ups.
- While doing set-ups and verifying measurements employee will routinely bend.
New, Posted 1 day ago
Apply Directly
Assembler - Hiring Now
OIL STATES INDUSTRIES
Tulsa, OK 74146
~ 21 min Onsite
- Basic math skills
- Familiar with hand tools, bench equipment
- Basic verbal and written communication skills
- Reading comprehension skills
- Ability to work independently or in a team environment
- Able to exercise good judgement
- Ability to contribute towards the success of a team
- Moderate physical effort required.
- Frequent standing
- Prolonged sitting
- Repetitive motion of finger, wrist, elbow, shoulder or neck movement
- Frequent use of finger tips
- Lifting up to 20 pounds from floor to waist
- Ability to speak clearly
- Reaching/lifting while holding objects weighing up to 20 pounds
- Seeing to visually inspect, measure/assemble at a close distance
Apply Directly
Welder - Hiring Now
Alfa Laval
Broken Arrow, OK 74012
$23-$26/hr
~ 19 min OnsiteHealth InsurancePaid Time OffRetirement Benefit
- High School diploma or GED, required, with relevant experience
- Minimum 1 year experience using mig or tig welding
- Proficient in MIG welding and oxyacetylene torch use
- Skilled in basic math and tape measure reading
- Experienced with hand tools, drill/saw machinery, and overhead crane operation
- Must pass Pulmonary Function Test (PFT), if PAPR is required
- Manufacturing experience required; industry background preferred
- Strong verbal and written English communication skills are required to ensure safe and effective performance of job duties
- Regularly exert up to 50 lbs of force occasionally; 30 lbs of force frequently
- Stand or walk for 80% of the workday
- Required to have visual acuity to operate motor vehicles and/or heavy equipment
- Mobility & Posture: Standing, walking, crouching, stooping, kneeling, and balancing on varied surfaces
- Manual Dexterity: Reaching, grasping, pushing, pulling, and lifting objects using upper body strength
- Fine Motor Skills: Repetitive motions involving wrists, hands, and fingers for precision tasks
- Communication: Clear verbal expressions and active listening to convey and receive detailed instructions
- Sensory Abilities: Adequate hearing to distinguish sounds and spoken communication in a work environment
- Must wear Personal Protective Equipment: steel toe boots, safety glasses, and ear plugs
- Exposure to various weather conditions cold or hot, wet/humid conditions, and loud noise levels. No climate-controlled environment.
- Work near hazards: moving machinery, vehicles, electrical currents, and chemicals
- Encounter atmospheric conditions: fumes, dust, gases, odors, and poor ventilation
- Operate in confined spaces such as narrow aisles or passageway
- Communicate effectively through speech and hearing
- This position is in Broken Arrow, Oklahoma
Apply Directly
Fitter/Welder
Arcosa
Tulsa, OK 74145
New, Posted 1 day ago
Apply Directly
Welder - Hiring Now
Kelvion Holding GmbH
Catoosa, OK 74015
~ 29 min OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Weld metal parts together using mig, and/or stick welding or any combination using both arc welding processes to fabricate or repair headers or header subassemblies.
- Ability to understand and interpret drawings, weld symbols and weld procedures
- Ability to operate pneumatic or electric grinders
- Removes metal with carbon arc gouging equipment and/or plasma gouging equipment
- Repair broken or cracked parts and fills holes.
- Maintains production record of parts and jobs fabricated as required by the Department Manager.
- Position pieces with overhead or jib cranes.
- Regular attendance, ability to arrive at work punctually, ability to work on-site, ability to work overtime.
- Ability to work cooperatively with others, ability to deal respectfully with the public, customers, vendors, other employees, managers, and executive management.
- Ability to perform multiple tasks concurrently, ability to work in a fast-paced environment, ability to interchange with others in the department.
- Ability to add and subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
- Ability to use and interpret tape measures.
- Must pass American Society of Mechanical Engineering welding test.
Apply Directly
Welder -- KUMDC5728821
Compunnel
Tulsa, OK 74145
Apply Directly
Hand Solder
OAI ELECTRONICS, LLC
Tulsa, OK 74145
What companies are hiring Pipe Welder jobs in Bixby,OK?
- Ametek
- Roxtec
- Hubbell Incorporated
- NOV
- OIL STATES INDUSTRIES
- Alfa Laval
- Arcosa
- Kelvion Holding GmbH
- Compunnel
- OAI ELECTRONICS, LLC
- Ametek
- Roxtec
- Hubbell Incorporated
- NOV
- OIL STATES INDUSTRIES
- Alfa Laval
- Arcosa
- Kelvion Holding GmbH
- Compunnel
- OAI ELECTRONICS, LLC
What is the hourly salary range for Pipe Welder jobs in Bixby,OK?
The hourly salary range is $23 - $26.
The hourly salary range is $23 - $26.
