Commute Time
Date Posted
Title
Job Type
Benefits
Pay
4014 Master Trainer jobs in Seattle,WA
Apply Directly
Maintenance Technician - 1st Shift.
ConAgra Foods
Kent, WA 98032
$35/hr
~ 31 min OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Must maintain regular attendance.
- Report food safety problems to personnel with authority to initiate action.
- Must follow all plant work, safety, food safety, and GMP standards.
- 2 years previous experience in electrical controls, hydraulics, pneumatic and ammonia refrigeration in a food manufacturing environment.
- Refrigeration operator's license.
- High School diploma or equivalent
ZipRecruiter
Earthwork & Utility Foreman
K Con, LLC
Woodinville, WA 98072
$40-$50/hr
Urgently HiringHealth InsurancePaid Time OffRetirement Benefit
Apply Directly
Shipfitter - Navy
IMIA, LLC
Bremerton, WA 98337
$24-$33/hr
~ 1 hr 15 min OnsiteHealth InsuranceRetirement Benefit
- Ability to perform simple shop math, convert decimals to factional equivalents and fractions to decimal equivalents
- Knowledge of machines and tools, including their designs and uses
- Measuring tapes, rulers, squares, levels, chalk lines, saws, shears, plasma cutters, oxy-fuel torches, angle grinders, welding machines, welding torches, electrodes, welding masks, cranes, hoists, chains, slings, come-alongs, hammers, screwdrivers, wrenches, pliers, vise grips, clamps, files, deburring tools, drills, grinders, sanders, impact wrenches, reciprocating saws, air hammers (pneumatic), riveters (pneumatic), forklifts, pallet jacks, trolleys, and other tools
- Often works on scaffolds and ladders. To avoid injury, safety clothing is required along with safety devices to protect the eyes, head, or hearing
- Work over extended periods of time in tightly configured confined spaces
- Familiarity with the metric system
- Willingness to learn and work to the best of his/her abilities as well as dependable work ethic
- Most work performed will be onboard a ship, in a dry dock or shipyard under fast- paced conditions; frequently requiring overtime
- Shipfitter
- Ability to identify and measure material
- Ability to read and interpret documents furnished in written, oral, diagram or schedule form such as safety rules, operating and maintenance instructions, quality manuals and procedure manuals
- Experience with steel, aluminum and/or stainless steel required
- Ability to read blueprints, drawings, calipers, tape measures and angle gauges
- Ability to follow instructions given both verbally and in written form
- High school graduate, or GED preferred
- Consistent exposure to extreme temperatures, outdoor elements, high noise levels, toxic or caustic chemicals and dusty conditions
- Six months to one-year related experience and/or training
- Ability to stand continuously for long periods of time
New, Posted 21 hours ago
Apply Directly
Store Leader
Music & Arts
Bellevue, WA 98009
$23-$25/hr
~ 18 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- 2 years of relevant work experience
- High School Diploma or Equivalent
Apply Directly
Quality Inspector 3
Triumph Group
Redmond, WA 98053
$28.33-$40/hr
~ 18 min Onsite
- A minimum of 5-7 years in quality inspection/machining (final, source and in process inspection) working in a manufacturing environment
- Must have working knowledge of geometric tolerancing, gages, micrometers, borescopes and other measuring tools
- High School or Technical School Diploma or equivalent.
- U.S. applicants must be legally authorized to work in the United States without company sponsorship.
- Ability to apply geometry and trigonometry skills to solve problems and calibrate equipment
New, Posted 1 day ago
Apply Directly
Maintenance Technician III – Facilities
Simpson Housing LLLP
Sammamish, WA 98075
$28-$30/hr
$100 bonus
~ 28 min OnsiteUrgently HiringHealth InsurancePaid Time OffRetirement Benefit
- Experience with MS Office Suite (Word and Outlook)
- HVAC/EPA certification and Fair Housing training is required
- 2+ years of related multifamily/hotel maintenance experience
- CPO and CAMT (Apartment Maintenance) certifications are also required
- Strong knowledge and experience with HVAC systems, electrical, plumbing, appliance repair and general carpentry
New, Posted 21 hours ago
Apply Directly
Trainer
Securitas
Seattle, WA 98127
$28/hr
OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Must have the legal right to work in the USA
- Proficient in Microsoft Office programs
- 1 year of HR experience.
- Must be willing to participate in the Company's pre-employment screening process, including drug and background
- Must have the ability to read, speak and write English
- Associate degree
- Must have reliable means of communication & transportation.
- Must be at least 18 years of age.
Apply Directly
Mechanical Assembler II
RTX
Everett, WA 98204
~ 31 min OnsiteFlexible ScheduleEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.
- HS diploma with a minimum of 1 year of relevant experience. In the absence of a HS diploma or GED, 3 years of relevant experience is required.
- Follow regulatory and company standards in the assembly process.
- Ability to sit for extended periods of time.
- Ability to stand for long periods of time.
- Adhere to all safety protocols and procedures to ensure a safe working environment.
- Ability to work in cramped spaces, often working on knees, lying down, or crawling.
New, Posted 8 hours ago
Apply Directly
MECHANICAL ENGINEER
Naval Sea Systems Command
Keyport, WA 98345
- OR
- Must be determined suitable for federal employment.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
- Your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: as a professional engineer assisting with management of a project involving lightweight torpedoes and/or risk assessments.
- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico.
- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
- This is a bargaining unit position.
- Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
- Must participate in the direct deposit pay program.
- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management.
- Must be a US Citizen.
- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above).
- This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
- Males born after 12-31-59 must be registered for Selective Service.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
- This is a Mission Essential position. You will be required to ensure organization or facility continuity of operations and/or completion of tasks that are considered essential to the mission designated by a local or command decision.
- Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade level. This requirement is called time-in-grade. Time-in-grade requirements must be met by the closing date of this announcement.
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
Apply Directly
Journeyman Pipefitter
Vigor, LLC
Seattle, WA 98154
OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Transfers materials on/off bench, pallet, and install on vessel. Requires vertically/horizontally transferring materials weighing up to (75 lbs.) from (4") to (48"), up to (10/hr.), a distance of up to (25 feet) without mechanical assistance.
- Accesses pipe systems, works off manlifts, scaffolding. Must tolerate heights up to (100 ft.).
- Four-hour fire watch certification must be obtained within 30 days of hire
- Performs rigging (as applicable to pipe and valve systems) - standards, terms, signals and safe working loads.
- Vigor Industrial LLC and its wholly owned subsidiaries are drug, smoke and vape-free workplaces.
- Prospective employees must pass a drug and alcohol test and background check as pre-employment screening.
- Sits to weld. Requires tolerance of seated posture up to (45 min.) continuously, for a total of up to (6 hr.) per (8 hr.).
- Tests and operates hydro pumps up to 5,000 psi.
- Successfully performs work as an individual, as a member of a single craft, or a multi-craft work crew.
- Reads blueprints to identify locations of various pipe systems.
- Transfers fabricated parts on/off shop table, pallet. Requires vertically transferring fabricated parts weighing up to (40 lbs.) from (4") to (40"), up to (20/hr.).
- Accesses vessels, job locations. Requires climbing stairs up to 180 steps/hr. in (8 hr.).
- Safety equipment required: must wear welding helmet, hard hat, clothing with no holes, long sleeve shirts, eye protection, respirator, hearing protection, and leather shoes.
- Accesses shop, tools, materials, vessels, job location. Requires walking up to (3.0 mi.) in (8 hr.).
- Transfers pipe, valves, tools, welding stinger to/from area of need. Requires vertically transferring pipe, valves, tools, welding stinger weighing up to (10 lbs.) from (4") to (76"), up to (60/hr).
- Accesses tanks, scaffolding. Requires climbing ladder up to 200 rungs/hr. in (8 hr.).
- Makes competent weldments, i.e., targeting pipe and hanger.
- Accesses interior of pipes to weld same. Must work in spaces with limited headroom of (24").
- Uses a tape measure.
- Positions, adjust pipes, valves into position. Must horizontally transfer pipes, valves requiring a force up to (60 lbs.), up to (6/hr.), a distance up to (2 ft.).
- Works outdoors: Frequently exposed to prevailing weather conditions.
- Performs work with minimal supervision.
- Successful job candidates will be asked to provide documentation of their US Persons status.
- High school diploma or GED preferred.
- Lays out, targets and fabricates various pipe (P-1 and below) to quality assurance standards.
- Determines sizes and schedules of pipes/take off of fittings (90o, 45o, and tees) utilized in the fabrication and/or repair of systems.
- Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- Requires (near/far/depth/color) vision to operate pipe threading machine, pipe bender, Oakey beveler; to fit, weld, layout pipe; to read tape measure.
- Talking, Hearing, Vision, Near Acuity (clarity of vision at 20 inches or less), Far Acuity (clarity of vision at 20 feet of more), Depth Perception (three-dimensional vision to judge distance/ spatial relationships), Color Vision (if required to distinguish colors for job performance or safety), Field of Vision (if required to observe a large field of vision while keeping eye fixed on a given point for job performance or safety), and Smell.
- Operation of equipment/tools/vehicles: Uses (1-1/2 to 3 ton capacity) pipe threading machines, pipe bender, Oakey bevelers, positioners, grinders, drill motors/presses, portaband, sawsall, tape measure, cutting torch, overhead crane, lift truck, hand power tools including chainfall, portapower, compressed gas tank and wire feeders.
- 5 years relevant work experience.
- Incumbent performs similar work in all areas of the Yard as the need arises.
- Works indoors: Frequently works indoors in environments which may have fumes, chemicals and heat, as well as noise and dust present, depending upon the location of the pipe.
- This role is with a federally contracted employer and is subject to regulations that restrict employment to US Persons only (i.e. US Citizens, lawful permanent residents, legally recognized asylees and refugees, and persons protected under INA).
- Other Exposures: May be exposed to vibrations, smoke, acids, degreasing cleaners, fumes, free silica, asbestos, dust, welding, solvents, oil, grease, and raw sewage; works in confined spaces.
- Successfully completes sustained work at various heights, including, but not limited to 100 feet.
- Accesses tanks, bilge areas. Accesses spaces with specific entries (18") x (24").
- Traces, disassemble, assemble, layout, weld pipe systems aboard vessels. Requires repetitive assumption of posture to access a point (1 inches) from the floor up to (60/hr.).
- Disassembles/assembles and/or repair of shipboard systems.
- Stands to operate pipe threading machine, pipe bender, Oakey beveler; to fit, weld, layout pipe. Requires tolerance of standing posture up to (50 min.) continuously, for a total of up to (6 hr.) per (8 hr.).
- Properly cares for and safely uses hand and power tools and all company property.
- HAZWOPER -First Responder Awareness Level
- Sets up and operates flushing machine.
- Traces various pipe systems aboard vessels, including steam, lube oil, salt water, fresh water, hydraulics, cargo, crude oil and/or product, compressed air, etc.
- Operates pipe threading machine, pipe bender, and Oakey bevelers.
- Places rod in welding stinger, advance flex core wire feed, use power tools such as impact wrenches, grinders requiring coupling forces up to (25 lbs.), up to (60/hr.).
- Transfers parts (spools) to/from area of need. Requires vertically/horizontally transferring parts (spools) weighing up to (40 lbs.) from (4") to (76"), up to (4/hr.), a distance of up to (25 feet) without mechanical assistance.
What companies are hiring Master Trainer jobs in Seattle,WA?
- ConAgra Foods
- K Con, LLC
- IMIA, LLC
- Music & Arts
- Triumph Group
- Simpson Housing LLLP
- Securitas
- RTX
- Naval Sea Systems Command
- Vigor, LLC
- ConAgra Foods
- K Con, LLC
- IMIA, LLC
- Music & Arts
- Triumph Group
- Simpson Housing LLLP
- Securitas
- RTX
- Naval Sea Systems Command
- Vigor, LLC
What is the hourly salary range for Master Trainer jobs in Seattle,WA?
The hourly salary range is $23 - $50.
The hourly salary range is $23 - $50.
