Commute Time
Date Posted
Title
Job Type
Benefits
Pay
933 Machine Operators jobs in Sapulpa,OK
New, Posted 23 hours ago
Apply Directly
Logistics Coordinator (Work From Home) - $1,800 to $3,500 Weekly
American Logistics Authority
Tulsa, OK 74145
$1,800-$3,500/wk
Remote
Apply Directly
Machine Operator
Trulite Glass & Aluminum Solutions
Tulsa, OK 74145
$22/hr
~ 22 min OnsiteHealth InsuranceRetirement Benefit
- CMS, CNC, Hand Fab, or Polish Machine Operator experience.
- Experience in a production or manufacturing environment
- Ability to lift up to 75 lbs. unassisted.
- Must be able to lift up to 150 lbs. with assistance.
- Ability to push weights greater than 150lbs with a team.
- Ability to read a tape measure.
- Ability to follow instructions from Supervisor, Plant Manager and/or Branch Manager.
- Ability to work in varied temperatures consistent with same climate conditions of the region in a non-climate-controlled facility (Heat, Cold, humidity).
New, Posted 3 hours ago
Apply Directly
Assembler - Hiring Now
OIL STATES INDUSTRIES
Tulsa, OK 74146
~ 22 min Onsite
- Basic math skills
- Familiar with hand tools, bench equipment
- Basic verbal and written communication skills
- Reading comprehension skills
- Ability to work independently or in a team environment
- Able to exercise good judgement
- Ability to contribute towards the success of a team
- Moderate physical effort required.
- Frequent standing
- Prolonged sitting
- Repetitive motion of finger, wrist, elbow, shoulder or neck movement
- Frequent use of finger tips
- Lifting up to 20 pounds from floor to waist
- Ability to speak clearly
- Reaching/lifting while holding objects weighing up to 20 pounds
- Seeing to visually inspect, measure/assemble at a close distance
- This position is designated as a Safety Sensitive Position as defined by the Oklahoma Medical Marijuana and Patient Protection Act.
New, Posted 3 hours ago
Apply Directly
Assembler - Hiring Now
Dover Corporation
Jenks, OK 74037
~ 14 min OnsiteHealth InsurancePaid Time OffRetirement Benefit
- High school diploma or general education degree (GED); or one to three years related experience and/or training; or equivalent combination of education and experience.
- Must be able to travel as required and /or directed.
New, Posted 3 hours ago
Apply Directly
Assembler - Hiring Now
Smiths Group
Tulsa, OK 74103
~ 22 min Onsite
- High school diploma or general education degree (GED)
- **Tube bending experience is required**
- Ability to read and interpret average assembly drawings, make calculations and resolve elementary technical problems.
- One year related experience and 2 years of On the Job Training or an equivalent combination
- Must be able to learn to operate overhead cranes and forklift.
- Must be able to stand for extend periods of time; a minimum of 2 hours.
- Must be able to maneuver to all areas of the office, shop, or warehouse
- Must be able to lift and carry up to 35 pounds or utilize team-lift or lifting assistance for items over 35 pounds.
New, Posted 1 day ago
Apply Directly
Welder - Hiring Now
NOV
Tulsa, OK 74131
~ 22 min OnsiteFlexible SchedulePaid Time OffRetirement Benefit
- Education : A high school diploma or GED is the minimum requirement, often supplemented by vocational or technical school training.
- Ability to pass a drug screen & background check.
- 5-7 years of traditional welding experience (Job Shop and Welding experience).
- Must be GTAW Certified (SMAW & GMAW certifications are a plus).
- Skills & Training : Proficiency in arc welding, brazing, and soldering is necessary. Knowledge of grinding, sand/shot blasting, and finishing to remove cast defects is common in foundry roles.
- Certifications : While not always mandatory, AWS certification is highly regarded. Specific certifications may include Certified Welder or Certified Foundry Specialist (CFS).
- Technical Skills : Ability to read blueprints/drawings; weld to specific tolerances; read and interpret Welding Procedure Specification (WPS); Knowledge of welding practices and standards such as ASME & AWS; knowledge of fabrication tools such as grinders, etc; Knowledge of High-Alloys; Stainless Steels, Mid-Alloys, and Carbon Steels; Knowledge of NCR process; Familiarity with gas shields and welding consumable specs; ability to weld in Flat/Horizontal positions; and ability to weld on an open root groove and fillet Weld.
- Per HSE requirements, you could be required to participate in medical surveillance programs.
- Must be willing and able to work flexible shifts and changing work schedule.
- Must be able to communicate in English (both written and oral) as it relates to the job.
- Work potentially will be performed in areas where harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing chemicals).
- You will be required to wear personal protective equipment such as gloves, clothing, glasses, goggles, respirator/face mask, ear plugs/muffs and safety shoes continuously for the duration of the work shift.
- Physical stature must be such that the individual can operate a machine eight (8) to twelve (12) hours per day.
- No reoccurring physical problems that could be aggravated by this type of work.
- While performing the duties of this job, the employee is required to listen to machine and tooling to ensure the machine and tooling are operating properly.
- The employee must be able to lift, pull, or push up to 50 pounds during set-ups.
- While doing set-ups and verifying measurements employee will routinely bend.
New, Posted 22 hours ago
Apply Directly
Machine Operator
Trulite Glass&Aluminum Solutions
Tulsa, OK 74145
$22/hr
New, Posted 3 hours ago
Apply Directly
Assembler - Hiring Now
Alfa Laval
Broken Arrow, OK 74012
$19-$21/hr
~ 27 min OnsiteHealth InsurancePaid Time OffRetirement Benefit
- High School Diploma or GED, required
- Basic math skills including the ability to read a tape measure and calipers required
- Strong verbal and written English communication skills are required to ensure safe and effective performance of job duties. This includes the ability to understand and follow blueprints, safety instructions, hazard communications, and emergency procedures with clarity and confidence.
- Regularly exert up to 50 lbs of force occasionally: 30 lbs of force frequently
- Stands or walks 80% of workday.
- Required to have visual acuity to operate motor vehicles and/or heavy equipment.
- Lifting raw materials, assemblies, and equipment using lifts, or manually up to 50 lbs
- An overhead crane will be used for items over 50lbs.
- Individuals will be climbing ladders, bending squatting and using many mechanic type of tools.
- Mobility & Posture: Standing, walking, crouching, stooping, kneeling, and balancing on varied surfaces
- Manual Dexterity: Reaching, grasping, pushing, pulling, and lifting objects using upper body strength
- Fine Motor Skills: Repetitive motions involving wrists, hands, and fingers for precision tasks
- Communication: Clear verbal expressions and active listening to convey and receive detailed instructions
- Sensory Abilities: Adequate hearing to distinguish sounds and spoken communication in a work environment
- Must wear Personal Protective Equipment: steel toe boots, safety glasses, and ear plugs
- Exposure to outdoor weather, extreme heat or cold, loud noise, and vibration
- Work near hazards: moving machinery, vehicles, electrical currents, and chemicals
- Encounter atmospheric conditions: fumes, dust, gases, odors, and poor ventilation
- Operate in confined spaces such as narrow aisles or passageway
- The noise level in the work environment is often loud.
- Communicate effectively through speech and hearing
- All employees are expected to prioritize safety, regardless of role. This includes strict adherence to company-wide safety policies and procedures, proactive promotion of safe practices, and addressing unsafe behaviors or conditions in a constructive and positive manner.
- Full compliance with all Alfa Laval policies and procedures is required to maintain a respectful, safe, and productive work environment.
New, Posted 1 day ago
Apply Directly
Warehouse Picker Order Selector
Keurig Dr Pepper
Tulsa, OK 74172
$18.58/hr
~ 22 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Ability to work while standing, pushing, pulling, bending, twisting, kneeling and lifting for the entire duration of the shift.
- Ability to lift up to 50 lbs. throughout the entire shift from floor to over-head.
- Ability to work while using a headset, voice-activated, order selector picking system.
- Ability to hand shrink wrap pallets of completed orders.
- Ability to work in multi-temperature environments, hot or cool.
New, Posted 5 hours ago
Jobcase
2nd Shift Production Worker - Tulsa, OK
Southwestern Wire
Tulsa, OK 74127
$17/hr
What companies are hiring Machine Operators jobs in Sapulpa,OK?
- American Logistics Authority
- Trulite Glass & Aluminum Solutions
- OIL STATES INDUSTRIES
- Dover Corporation
- Smiths Group
- NOV
- Trulite Glass&Aluminum Solutions
- Alfa Laval
- Keurig Dr Pepper
- Southwestern Wire
- American Logistics Authority
- Trulite Glass & Aluminum Solutions
- OIL STATES INDUSTRIES
- Dover Corporation
- Smiths Group
- NOV
- Trulite Glass&Aluminum Solutions
- Alfa Laval
- Keurig Dr Pepper
- Southwestern Wire
What is the hourly salary range for Machine Operators jobs in Sapulpa,OK?
The hourly salary range is $17 - $22.
The hourly salary range is $17 - $22.
