Commute Time
Date Posted
Title
Job Type
Benefits
Pay
5991 Engineering Technician jobs in Sugar Land,TX
Apply Directly
Operator - Assembly (Day Shift)
Igloo Products
Katy, TX 77494
~ 30 min OnsiteBilingual PreferredHealth InsurancePaid Time Off
- Able to lift overhead up to 35 lbs. repetitively
- Personal Protective Equipment (PPE) such as ear protection, safety glasses, steel-toed shoes, gloves, and protective clothing may be required depending on the task.
- Able to lift a maximum of 35 lbs. multiple times a day during a 12 hour shift floor to waist level
- Environmental Conditions: Work is performed in a production setting where seasonal temperatures may range from 100-120°F (with humidity) in summer to cooler conditions in winter.
- Experience: One (1) year manufacturing assembly experience
- Visual Requirements: Sufficient visual acuity (e.g., 20/40 with or without correction) is necessary for tasks involving inspection and safe equipment operation.
- Standing & Walking: Roles may involve extended periods (up to 12 hours) of standing and walking,
- No previous experience required
- All applicants must be at least 18 years old and legally authorized to work in the United States on a permanent basis.
- Fine Motor Skills & Tool Use: Use of both hands is required to operate tools, perform adjustments, and handle assembly materials with precision.
- Language skills: Able to read, write, speak and comprehend either English or Spanish
- Able to push up to 35 lbs. on rollers or wheels
- Operator-level roles may involve lifting up to 25 lb repeatedly throughout the shift.
- Postural Requirements: Frequent bending, stooping, kneeling, and working in low or awkward positions during production or maintenance tasks.
- Minimum height requirement of 60 inches
- Must have solid attention to detail
- Education: High School diploma or equivalent
- Bend and stand in difficult positions up to 12 hours
- Math skills: Basic
- Work environment: Manufacturing environment is hot and humid in summer months, cold during winter months. High noise level requires use of hearing protection.
New, Posted 1 day ago
Apply Directly
Corrosion Technician I - USA - TX - Stafford - R26-03775
BrandSafway
Stafford, TX 77477
$30-$38/hr
~ 12 min OnsiteHealth InsuranceRetirement Benefit
- Must be able to travel and stay near job sites for up to 3 weeks
- Clean driving record
- AMPP CP 1 certification
- Minimum 1 year of experience preferred
- Travel: 75%
Apply Directly
Engineering Administrative Assistant
Murray Resources - Best Staffing Agency
Houston, TX 77246
$27-$30/hr
Apply Directly
Quality inspector
NOV
Houston, TX 77064
~ 30 min Onsite
- Basic computer skills and experience with ERP systems or data entry
- High school diploma or equivalent preferred
- Basic knowledge of quality control principles and non-conformance processes
- Minimum of 1-2 years of experience in quality inspection, manufacturing, or related industrial environment preferred
- Strong attention to detail and ability to identify defects and inconsistencies
- Ability to accurately complete documentation and maintain detailed records
Apply Directly
Maintenance Technician - Millwright
Ecolab
Fresno, TX 77545
$35/hr
~ 25 min OnsiteChildcare AssistanceEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Must be able to work possible overtime including callouts, weekends, holidays, etc. Normal work schedule - 4/10's Monday - Thursday.
- No immigration sponsorship offered for this role
- 2 years Millwright experience in industrial maintenance environment (chemicals/plant)
- 1 years of experience with electrical and mechanical systems in an industrial environment
- Ableness to walk on an elevated catwalks over 15 feet high and working confined spaces to perform daily duties.
- High School diploma or equivalent
- Plant location: Fresno, TX
- Be fully vaccinated for COVID-19, including a booster if eligible, unless a religious or medical accommodation is requested by the applicant and approved by Ecolab.
- 1 years of experience with electronic and PLC based applications in an industrial environment.
- Must be able to lift/carry 50 pounds
- Must be able to read, understand and use IOMs or blueprints to tear down / rebuild equipment.
- Undergo additional background screens and/or drug/alcohol testing for customer credentialing.
- 2 years of experience in an industrial maintenance environment
- 1 years of experience with tools, procedures and methods utilized in an industrial maintenance environment.
Apply Directly
Field Service Engineer - Automation
Powell Industries
Houston, TX 77246
Requires TravelFlexible ScheduleHealth InsurancePaid Time OffRetirement Benefit
- Knowledge in common industrial communication protocols such as Modbus TCP/IP, IEC61850, and DNP 3.0.
- Knowledge of configuration files using various manufactures such as SEL, GE, Siemens and Beckwith.
- Bachelor's degree in electrical engineering, as well as 5+ years as an electrical field service engineer in Automation.
- Demonstrate ability to read and interpret plan sets and one-line diagrams.
- Willing to travel up to 70% of the year.
- Willing to attend in-house and out-side training.
- Must demonstrate working knowledge with the use of various hand tools and mechanical adaptability.
- The Field Service Automation Engineer will also be expected to demonstrate proficiency with computer skills using Oracle, MS Outlook, Power DB, Word & Excel.
- Demonstrate knowledge of basic electrical theory and control circuits i.e.: Ohm's Law; Advanced AC and DC theory; contactor and circuit breaker schematics.
- Specific knowledge of the following: ANSI IEEE device function numbers; ampacities of electrical conductors in switchgear applications; electrical air and surface creepage clearance requirements.
- Demonstrate knowledge of basic distribution protective relay testing, hi-pot testing, and breaker function testing. i.e.: testing of over-current and motor protection relays with current injection.
- Exhibit working knowledge of advanced electrical industry manufacturing standards & electrical systems, working knowledge of both factory testing standards and NETA MTS & ATS standards.
- Knowledge in SCADA systems using WonderWare InTouch, Allen Bradley Factory Talk, Copa-Data Zenon, Siemens WinCC, and/or SEL RTAC HMI
- Working knowledge with using the following test equipment: Multi-meter and relay test set.
- Specific standards include sections of ANSI IEEE C37 applicable to the design and manufacture of breakers and switchgear.
New, Posted 12 hours ago
Apply Directly
Manufacturing Operator
Trident Consulting
Houston, TX 77246
$19/hr
New, Posted 19 hours ago
Apply Directly
Quality Control Technician
BP
Houston, TX 77002
~ 30 min OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Possess a positive attitude, ability to work well within a team and a strong work ethic.
- Working knowledge of non-conformance reporting and root cause analysis.
- Experience working with hand tools, welding equipment, saws, punch press, drill press air tools, grinders, forklift, and overhead crane operations.
- Excellent communication skills.
- Basic computer skills (MS Office).
- Familiarity with AWS, ASME & ISO 9001 quality standards and systems.
- Strong understanding of safety standards.
- Proficient with measurement tools and visual inspection techniques.
- Experience reviewing material test reports.
- Hands on inspection experience in a manufacturing environment.
- Demonstrated ability to apply critical thinking to identify quality issues and recommend effective corrective actions.
- High School diploma or general education degree (GED).
- Strong attention to detail with technical and math abilities.
- Experience interpreting technical drawings, P&ID's and specifications.
Apply Directly
Manufacturing Engineer
Teledyne
Houston, TX 77002
~ 30 min Onsite
- Bachelor's degree (B.S.) from four-year college or university in a related field and 10 years of directly related experience and/or training; or equivalent combination of education and experience.
- Ability to travel domestically approximately 10%.
- U.S. Person for access to ITAR-Controlled Technical Data.
Apply Directly
Central Office Travel Technician
TEKsystems
Houston, TX 77084
$30-$35/hr
~ 30 min OnsiteHealth InsurancePaid Time OffRetirement Benefit
- DC Power Systems Expertise (Required)
- Central office Telecommunications Technicians
- Several years of experience working in central offices
- Eligibility requirements apply to some benefits and may depend on your job classification and length of employment.
- Hands on experience providing telecommunications support
What companies are hiring Engineering Technician jobs in Sugar Land,TX?
- Igloo Products
- BrandSafway
- Murray Resources - Best Staffing Agency
- NOV
- Ecolab
- Powell Industries
- Trident Consulting
- BP
- Teledyne
- TEKsystems
- Igloo Products
- BrandSafway
- Murray Resources - Best Staffing Agency
- NOV
- Ecolab
- Powell Industries
- Trident Consulting
- BP
- Teledyne
- TEKsystems
What is the hourly salary range for Engineering Technician jobs in Sugar Land,TX?
The hourly salary range is $19 - $38.
The hourly salary range is $19 - $38.
