Commute Time
Date Posted
Title
Job Type
Benefits
Pay
8972 Electrical Controls Process Engineer jobs in Los Angeles,CA
Apply Directly
Quality Control Inspector III
Motorola Solutions
Los Angeles, CA 90012
$26-$27/hr
OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Kneeling or squatting to access lower shelves.
- Minimum 3 years of hands-on inspection experience with electronic components, mechanical assemblies, or similar systems.
- Demonstrates ability to read and interpret complex technical documentation, including schematics, mechanical drawings, BOMs, and routing diagrams.
- Walking/Moving in the labs.
- Advanced proficiency using inspection tools and test equipment (e.g., multi-meters, calipers, micrometers, microscopes, torque drivers).
- Capable of identifying, documenting, and communicating non-conformances and contributing to corrective/preventive actions.
- Strong experience inspecting against IPC standards (J-STD-001, IPC-A-610, IPC-A-620), with working knowledge of defect criteria and process controls.
- Occasional exposure to heat and cold.
- Proficient with Google Workspace and Microsoft Office for reporting, documentation, and communication.
- Must be able to lift up to 50 lbs. when receiving incoming part shipments.
- Must possess strong organizational skills, attention to detail, and the ability to manage multiple priorities in a fast-paced environment.
- Perform bending and reaching movements to place items on lower and higher shelves.
- NOTE - Must be a U.S. Person (U.S. Citizen, or U.S. Permanent Resident) due to clients under U.S. federal contracts.
- High School Diploma or GED.
- Excellent written and verbal communication skills.
- All employment is contingent upon the successful clearance of a background check and drug test.
Apply Directly
Mechanical Controls Engineer, Special Projects
Hadrian
Los Angeles, CA 90012
OnsiteHealth InsuranceRetirement Benefit
- Develop and maintain PLC applications using Beckhoff TwinCAT 3 or Siemens TIA Portal.
- ITAR Requirements: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
- Experience designing and commissioning electrical systems and panels to industrial safety standards.
- Integrate and commission a variety of industrial robots and sensors using industrial protocols such as EtherCAT, PROFINET, OPC-UA, and MQTT.
- Perform onsite commissioning, troubleshooting, and system optimization, including mentoring junior engineers and codifying best practices.
- Demonstrated ability to troubleshoot complex systems using diagnostic tools and lead structured root cause analysis.
- Lead the electrical and controls design for advanced automated manufacturing systems, including CNC, robotic, and tooling cells.
- Strong skills in integrating sensors and performing risk assessments in accordance with safety standards such as ISO 13849 or ANSI B11.
- Expertise in PLC programming (IEC 61131-3) and motion control, especially with TwinCAT 3 or TIA Portal.
- Electrical & Controls Engineer
- Design and debug control panels to industrial standards (NFPA 79, UL 508A).
- Proficiency in robotic systems integration with ABB, Fanuc, Yaskawa, or Kuka platforms.
- Design and create HMI interfaces.
New, Posted 1 day ago
Apply Directly
Assembler - Hiring Now
Crane Company
Los Angeles, CA 90012
Onsite
- Must be a high school graduate or equivalent/GED, and ability to read and write English.
- Ability to lift up to 35 lbs.
- Ability to read blueprints, use pneumatic and basic hand tools
- Ability to meet consistent attendance
- Must pass a basic Math and English test with 75% accuracy and dexterity test
- Must be a quick learner and be able to follow procedures and written documentation to build product
- Must be able to sit or stand for long periods of time. Position demands some repetitive motion tasks (pushing/pulling and gripping)
- Computer usage to the point of data input.
Apply Directly
Process Engineer
Spears Manufacturing
Los Angeles, CA 90079
Apply Directly
Manufacturing Engineer
Electronic Source Company
Los Angeles, CA 90079
SCADA Integration Engineer
CSI Electrical Contractors
Santa Fe Springs, CA 90670
$95,000-$135,000/yr
RemoteHealth InsurancePaid Time OffRetirement Benefit
- Ability to travel up to 40%
- Possess a minimum of a vocational degree in electronics/computer/networks
- Has experience with routers, managed switches, LAN development, WAN development
- Has knowledge of software programs and protocols: IEEE 61850, IEC 61131-3, SEL, ABB & GE platforms, DNP, Modbus, Bocce, etc.
- May be required to sit or stand for long periods of time
- Position may be subject to pre-employment screening, which may include background check and drug testing.
- Possess a minimum of 4 to 7 years of related work experience (Can be a combination of trade & relevant work experience)
- Frequently works outdoors on uneven surfaces
- May be required to stoop, bend, and crouch
- Has experience with integration and debug of programs in a substation or industrial environment
- Proficiency in MS Office Suite of products, Bluebeam, and other web-based software applications
- This an office position that will require field time with the ability to travel and work remotely
Apply Directly
Automation and Controls Engineer
Castelion
Torrance, CA 90504
Health InsurancePaid Time Off
Apply Directly
Machining Maintenance Technician (Electronics)
Howmet Aerospace
Carson, CA 90745
$22-$29/hr
~ 20 min OnsiteFlexible ScheduleHealth InsurancePaid Time OffRetirement Benefit
- Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position
- Lifting, standing, climbing, bending, grasping, sitting, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position
- High School Diploma or GED equivalent
- This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items
- Must be able to work on site in Carson, California
- Must be able to work on the 1st shift and overtime and/or weekends as needed
- Able to lift 15-30lbs. Unassisted and repetitively
- 1st Shift: 4 AM - 2 PM
- Minimum +1 years of experience troubleshooting and repairing production and/or manufacturing equipment
Apply Directly
QA Inspector I
Empower RF Systems
Inglewood, CA 90301
$24-$27/hr
~ 21 min Onsite
- Requires thorough understanding of QA inspection methods, including good analysis skills and technical knowledge.
- Proficiency in the use of inspection hand gauges including micrometers, dial indicators, vernier calipers, height gauges, internal & external thread gauges, ID/OD micrometers, bore gauges, etc.
- Must understand Quality Management Systems (ISO 9001) and advanced shop math.
- Minimum of 5 years Quality Control experience, preferably in a mil-spec aerospace environment.
- J-STD-001 or IPC-A-610 certified trainer/technician or ASQ Certified Quality inspector technician status is a big plus.
- Proficiency with Microsoft Office, including Word, Excel, PowerPoint, and Access is needed.
- Must have working familiarity with AQL sample inspection techniques, Zero acceptance lot sampling.
- Must be detail-oriented with excellent interpersonal communication skills.
- Must have knowledge of GD&T;, blueprint, and specification interpretation.
Apply Directly
Avionics/Electrical Technician 4
Gulfstream Aerospace Corporation
Van Nuys, CA 91406
$41.40-$48.30/hr
~ 26 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- High School Diploma or GED required.
- Must be able to read, write, speak, and understand the English language.
- Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience.
- A & P license, FCC license or NCATT certification preferred.
What companies are hiring Electrical Controls Process Engineer jobs in Los Angeles,CA?
- Motorola Solutions
- Hadrian
- Crane Company
- Spears Manufacturing
- Electronic Source Company
- CSI Electrical Contractors
- Castelion
- Howmet Aerospace
- Empower RF Systems
- Gulfstream Aerospace Corporation
- Motorola Solutions
- Hadrian
- Crane Company
- Spears Manufacturing
- Electronic Source Company
- CSI Electrical Contractors
- Castelion
- Howmet Aerospace
- Empower RF Systems
- Gulfstream Aerospace Corporation
What is the hourly salary range for Electrical Controls Process Engineer jobs in Los Angeles,CA?
The hourly salary range is $22 - $48.3.
The hourly salary range is $22 - $48.3.
