Commute Time
Date Posted
Title
Job Type
Benefits
Pay
5273 Electrical Controls Engineer jobs in Los Angeles,CA
Apply Directly
Electrical Controls Engineer
Hadrian
Los Angeles, CA 90012
OnsiteHealth InsuranceRetirement Benefit
- ITAR Requirements: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
- Experience with Siemens automation systems and programming.
- Experience designing and commissioning electrical systems and panels to industrial safety standards.
- Bachelor's degree in an engineering, physics, or computer science discipline.
- Demonstrated ability to troubleshoot complex systems using diagnostic tools and lead structured root cause analysis.
- Excellent written and verbal communication skills.
- Strong skills in integrating sensors and performing risk assessments in accordance with safety standards such as ISO 13849 or ANSI B11.
Apply Directly
Electronics Test and Assembly Technician-I (Overnight Shift)
Motorola Solutions
Los Angeles, CA 90012
$24-$25/hr
OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Good manual dexterity and strong hand skills with tools (tweezers, screw/bolt drivers, torque wrenches).
- Indoor air-conditioned facility.
- Competent as a PC user, and computer savvy.
- High School Diploma or GED.
- All employment is contingent upon the successful clearance of a background check and drug test.
- Must be a U.S. Person (U.S. Citizen, or U.S. Permanent Resident) due to clients under U.S. federal contracts.
- Occasional exposure to heat and cold.
- Lift up to 25 lbs.
New, Posted 1 day ago
Easy Apply
Electrical Technician
Adecco
Burbank, CA 91505
$25-$28/hr
~ 21 min OnsiteHealth InsurancePaid Time OffRetirement Benefit
- High School Diploma or GED required.
- Ability to sit and/or stand for extended periods of time.
- Minimum 2 years' experience in a manufacturing environment of electro-mechanical assemblies
- Proven ability to solder and unsolder surface mount components.
- Experience reading detailed Engineering Assembly drawings.
- Ability to use hand tools such as a Screwdriver, Wrenches, Pliers, etc.
- Ability to fluently use oscilloscopes, multimeters, and other various electronic test equipment.
Apply Directly
Assembler - Hiring Now
Crane Company
Burbank, CA 91502
$18.59/hr
~ 21 min OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Ability to work well in a moderate to high paced work environment in a high-volume setting
- Lifting (in pounds): Up to 40 pounds
- Manufacturing operations may require the use of safety equipment (**P** ersonal **P** rotective **E** quipment) to include but not limited to: eye safety glasses, gowning, masks, hearing protectors, heel/wrist straps and any other required PPE
- As a US Department of Defense contractor we are bound by the International Traffic in Arms Regulations (ITAR).
- Experience: 0-2 years of Assembly experience in a manufacturing environment
- Mental/Visual: Use of soldering equipment, microscopes/magnifying glasses
- Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods
- Education/Certification: High School diploma or equivalent
- Pushing (in pounds): Up to 40 pounds
- Adept hand-eye coordination and arm-hand steadiness
- FAA sensitive positions require employees to participate in a random drug test pool.
- Standing: 25% *percentage is approximate and may vary depending on work task
- Basic computer skills (understanding of basic software)
- Accurate color vision, near vision, and depth perception and other vision capabilities required
- Crane Aerospace & Electronics requires that candidates complete a satisfactory background check.
- Proficiency in reading comprehension (understanding written sentences and paragraphs in work related documents) of the English language
- Strong verbal and written communication
- Ability to thoroughly interpret production or engineering prints, production planning information and assembly aids such as illustrations and wiring diagrams
- This position requires access to controlled data or information and therefore only US persons will be considered.
- Flexible and willing to work overtime if necessary
- Manipulative skills, including finger and manual dexterity
- Sitting: 75% *percentage is approximate and may vary depending on work task
Apply Directly
Controls Technician - Brea, CA
Trane Technologies
Brea, CA 92821
~ 38 min Onsite
- Must be able to reach your hands over your head
- This role may be exposed to variable weather conditions, moving mechanical parts, heights, risk of electrical shock, noisy operating equipment and other variable environmental conditions based on location
- EPA Universal Certification Required
- Must be able to comfortably and routinely access rooftops with extension and/or fixed ladders at heights of 15' to 20', and occasionally, up to 50 feet +
- Must possess a valid driver's license for a minimum of 12 months, with no major or frequent traffic violations including, but not limited to: DUI, Hit & Run, License Suspension, Reckless / Careless Driving or multiple smaller infractions or preventable collisions in the previous 3 years.
- This position is highly physical and requires regular use of hands, fingers, walking, stooping, kneeling and climbing ladders. It requires employees to regularly lift and or move up to 10 lbs., frequently lift and/or move up to 40 lbs. and occasionally lift and/or move more than 40 lbs.
- Must be able to twist the trunk of your body 90 degrees in each direction
- Must be able to squat and touch the floor with both hands
- Must be able to maneuver confined access areas, as small as 30” vertical x 45” horizontal
- A High School Diploma or equivalent required, and typically 5 plus years of experience in HVAC.
- Operating knowledge of Microsoft office software and working proficiency with hand held computer (i.e. Smartphone, iPad).
- Must be able to wear helmets, safety goggles, fall protection harness and safety boots to safely perform job duties
- Must be able to stand on concrete surfaces for extended periods, routinely up to 4 hours
- Must be able to safely and legally operate a vehicle using a seat belt
- Must be able to safely use a ladder with a 375 lb. total weight limit, while carrying equipment of 50 lbs. or less
Apply Directly
Facilities Technician
Net2Source (N2S)
Glendale, CA 91222
New, Posted 1 day ago
Electrician - Full Time
Disneyland Resort Careers
Anaheim, CA 92804
$40.02-$48.73/hr
Apply Directly
Avionics/Electrical Technician 4
Gulfstream Aerospace Corporation
Van Nuys, CA 91406
$41.40-$48.30/hr
~ 26 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- High School Diploma or GED required.
- Must be able to read, write, speak, and understand the English language.
- Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience.
- A & P license, FCC license or NCATT certification preferred.
New, Posted 7 hours ago
Apply Directly
Manufacturing Engineer - Electrical (Associate or Mid-Level)
Boeing
El Segundo, CA 90245
~ 23 min OnsiteHealth InsuranceRetirement Benefit
- Employer will not sponsor applicants for employment visa status.
- Shift: 2nd shift
- Proficient with CAD/ECAD basics (CREO, SolidWorks, or similar), manufacturing data systems (MES/PLM), and Microsoft Office tools
- This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim U.S. Top Secret/SCI Clearance Pre-Start and final U.S. Top Secret/SCI Clearance Post-Start is required.
- 2+ years' experience defining process flows, process diagrams, and process documentation
- 2+ years' experience with Printed Circuit Board (PCB) design
- Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
- Familiarity with soldering processes, automated assembly (pick-and-place, reflow), conformal coating, cable/harness assembly, and electronic test methodologies
- This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.62 is required. "U.S. Person" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
- Relocation assistance is not a negotiable benefit for this position.
Apply Directly
Fire Protection Engineer
CSI Electrical Contractors
Santa Fe Springs, CA 90670
$31-$47/hr
RemoteHealth InsurancePaid Time OffRetirement Benefit
- Must have active Fire Protection Engineer (FPE) license
- Possess a minimum of 3 to 5 years of related work experience (can be a combination of trade& relevant work experience)
- Experienced with assessment and design of facility life safety systems
- Bachelor's or Master's degree in Electrical or Fire Protection Engineering, or equivalent years of experience.
- Thorough knowledge and understanding of life safety codes and standards
- Proficiency in MS Office Suite (Word, Excel, etc.)
- Williness to travel up to 20%.
What companies are hiring Electrical Controls Engineer jobs in Los Angeles,CA?
- Hadrian
- Motorola Solutions
- Adecco
- Crane Company
- Trane Technologies
- Net2Source (N2S)
- Disneyland Resort Careers
- Gulfstream Aerospace Corporation
- Boeing
- CSI Electrical Contractors
- Hadrian
- Motorola Solutions
- Adecco
- Crane Company
- Trane Technologies
- Net2Source (N2S)
- Disneyland Resort Careers
- Gulfstream Aerospace Corporation
- Boeing
- CSI Electrical Contractors
What is the hourly salary range for Electrical Controls Engineer jobs in Los Angeles,CA?
The hourly salary range is $18.59 - $48.73.
The hourly salary range is $18.59 - $48.73.
