Commute Time
Date Posted
Title
Job Type
Benefits
Pay
1386 Dock Builder jobs in Tulsa,OK
Apply Directly
Assembler - Hiring Now
Smiths Group
Tulsa, OK 74103
Onsite
- One year related experience and 2 years of On the Job Training or an equivalent combination
- Must be able to lift and carry up to 35 pounds or utilize team-lift or lifting assistance for items over 35 pounds.
- **Tube bending experience is required**
- Must be able to learn to operate overhead cranes and forklift.
- High school diploma or general education degree (GED)
- Must be able to stand for extend periods of time; a minimum of 2 hours.
- Ability to read and interpret average assembly drawings, make calculations and resolve elementary technical problems.
- Must be able to maneuver to all areas of the office, shop, or warehouse
New, Posted 1 hour ago
Easy Apply
Forklift Operator
Manpower Group
Tulsa, OK 74127
$20/hr
Onsite
- Ability to lift 50 lbs and work on your feet for extended periods
- Comfortable working outdoors in all weather conditions
- Proven experience operating a forklift in an industrial or logistics setting
- Must have reliable transportation to and from the Sand Springs location
Apply Directly
Assembler - Hiring Now
Dover Corporation
Jenks, OK 74037
~ 21 min OnsiteHealth InsurancePaid Time OffRetirement Benefit
- One to three years related experience and/or training;
- Must be able to travel as required and /or directed.
- High school diploma or general education degree (GED);
- Or equivalent combination of education and experience.
New, Posted 1 day ago
Apply Directly
Assembler - Hiring Now
OIL STATES INDUSTRIES
Tulsa, OK 74146
Onsite
- Prolonged sitting
- Moderate physical effort required.
- Familiar with hand tools, bench equipment
- Reading comprehension skills
- Frequent use of finger tips
- Seeing to visually inspect, measure/assemble at a close distance
- Basic verbal and written communication skills
- Lifting up to 20 pounds from floor to waist
- Basic math skills
- Ability to contribute towards the success of a team
- Repetitive motion of finger, wrist, elbow, shoulder or neck movement
- Reaching/lifting while holding objects weighing up to 20 pounds
- Able to exercise good judgement
- Ability to speak clearly
- Ability to work independently or in a team environment
- Frequent standing
Apply Directly
Assembler - Hiring Now
Kelvion Holding GmbH
Catoosa, OK 74015
~ 19 min Onsite
- Must have the ability to become company-certified in overhead crane usage. Company cranes are controlled remotely from the ground.
- Requires the ability to set, adjust and secure tooling using various hand tools and measuring instruments.
- The employee occasionally will be required hand lift and/or move objects up to **50 pounds**.
- The employee is frequently required to stand; reach with hands, arms, and shoulders.
- Minimal experience required
Apply Directly
Welder - Hiring Now
NOV
Tulsa, OK 74131
OnsiteFlexible SchedulePaid Time OffRetirement Benefit
- Must be GTAW Certified (SMAW & GMAW certifications are a plus).
- Must be able to communicate in English (both written and oral) as it relates to the job.
- While performing the duties of this job, the employee is required to listen to machine and tooling to ensure the machine and tooling are operating properly.
- While doing set-ups and verifying measurements employee will routinely bend.
- Skills & Training : Proficiency in arc welding, brazing, and soldering is necessary. Knowledge of grinding, sand/shot blasting, and finishing to remove cast defects is common in foundry roles.
- Ability to pass a drug screen & background check.
- Education : A high school diploma or GED is the minimum requirement, often supplemented by vocational or technical school training.
- You will be required to wear personal protective equipment such as gloves, clothing, glasses, goggles, respirator/face mask, ear plugs/muffs and safety shoes continuously for the duration of the work shift.
- Technical Skills : Ability to read blueprints/drawings; weld to specific tolerances; read and interpret Welding Procedure Specification (WPS); Knowledge of welding practices and standards such as ASME & AWS; knowledge of fabrication tools such as grinders, etc; Knowledge of High-Alloys; Stainless Steels, Mid-Alloys, and Carbon Steels; Knowledge of NCR process; Familiarity with gas shields and welding consumable specs; ability to weld in Flat/Horizontal positions; and ability to weld on an open root groove and fillet Weld.
- Physical stature must be such that the individual can operate a machine eight (8) to twelve (12) hours per day.
- No reoccurring physical problems that could be aggravated by this type of work.
- The employee must be able to lift, pull, or push up to 50 pounds during set-ups.
- Certifications : While not always mandatory, AWS certification is highly regarded. Specific certifications may include Certified Welder or Certified Foundry Specialist (CFS).
- Per HSE requirements, you could be required to participate in medical surveillance programs.
- Must be willing and able to work flexible shifts and changing work schedule.
- 5-7 years of traditional welding experience (Job Shop and Welding experience).
- Work potentially will be performed in areas where harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing chemicals).
Apply Directly
Delivery Driver/Warehouse
WORLDPAC
Tulsa, OK 74133
$17/hr
OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Ability to read and interpret documents such as safety rules, instructions and procedure manuals.
- Effective verbal and written communication skills.
- Demonstrates strong attention to detail and critical thinking skills.
- Must have a valid driver's license with an acceptable motor vehicle record (MVR) per company standards.
- Has reliable attendance and is punctual.
- Ability and willingness to drive safely, adhering to all company safety standards.
- Eligible to work within the country in which you are applying
- Education: High school/secondary school diploma or GED equivalent.
- Operates safely and can maintain a clean and neat work environment.
- Capable of safely operating equipment, such as forklift and pallet jack.
- Consistent and reliable attendance.
- Ability to use the computer and a handheld radio frequency device.
- Ability to challenge upwards – respectful pushback.
- Has example of great customer service and “going above and beyond.”
- Must meet all applicable state/province-specific driver's license requirements prior to driving a company vehicle to perform delivery duties.
- Proficient in basic math skills.
- Must be at least 18 years of age.
- Willingness to learn new skills and gain knowledge about all aspects of the Branch operations.
New, Posted 1 day ago
Apply Directly
Warehouse Operations Manager
creativeMINDS - Tulsa
Tulsa, OK 74145
Health InsurancePaid Time Off
Apply Directly
Plant Operator
Redd Ridge Consulting, LLC
Tulsa, OK 74145
Apply Directly
Welder I
Ametek
Tulsa, OK 74107
Onsite
- Minimum 2 years of experience in TIG Welding.
- While performing the duties of this job, the employee is regularly required to walk and talk or hear.
- Must be able to perform their own fit-ups on units they are building
- Proven ability to read and interpret blueprints
- Must be able to read calipers and other measuring equipment
- The employee is occasionally required to sit.
- Must be performed with or without reasonable accommodation.
- Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
- Strong troubleshooting knowledge down to component level using measuring gauges and test equipment.
- The employee may regularly lift and/or move up to 50 pounds and occasionally lift and/or move up to 50 pounds including the use of pneumatic and manual lifting devices.
- High School Diploma or GED
- Experience with performing own fit ups
- Must be able to comprehend manuals and blueprints
- The employee frequently is required to stand; use hands to handle or feel; and reach with hands and arms.
- Experience welding Stainless, Aluminum and Inconel
- Must pass weld test for appearance, penetration, bend, and x-ray on aluminum and stainless steel
- Must be comfortable using air powered tools such as die grinders, cut-off tools, belt sanders, and air drills
What companies are hiring Dock Builder jobs in Tulsa,OK?
- Smiths Group
- Manpower Group
- Dover Corporation
- OIL STATES INDUSTRIES
- Kelvion Holding GmbH
- NOV
- WORLDPAC
- creativeMINDS - Tulsa
- Redd Ridge Consulting, LLC
- Ametek
- Smiths Group
- Manpower Group
- Dover Corporation
- OIL STATES INDUSTRIES
- Kelvion Holding GmbH
- NOV
- WORLDPAC
- creativeMINDS - Tulsa
- Redd Ridge Consulting, LLC
- Ametek
What is the hourly salary range for Dock Builder jobs in Tulsa,OK?
The hourly salary range is $17 - $20.
The hourly salary range is $17 - $20.
