Commute Time
Date Posted
Title
Job Type
Benefits
Pay
2505 Diesel Tech jobs in Saint Louis,MO
Apply Directly
Munitions Mechanic
Boeing
Saint Charles, MO 63301
$22/hr
OnsiteHealth InsuranceRetirement Benefit
- Experience using Hand and/or air (pneumatic) tools
- 1+ year of experience working with precision measuring tools (Torque wrenches, scales, etc.)
- 1+ year of experience in manufacturing, fabrication, or assembly processes and procedures
- Proficient utilizing the Microsoft Office Suite
- "This position must meet Export Control compliance requirements, therefore a \"US Person\" as defined by 22 C.F.R. § 120.15 is required."
- "US Person" as defined by 22 C.F.R. § 120.15 is required.
- "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee.
- High school graduate or GED.
- Limited (0-1 Hrs) Crawling, Lying Down (back, front, side), Forceful grasping,
- Occasional (1-3 Hrs) Requires lifting, pushing, pulling, and supporting up to 35lbs,
- Bending at the waist, kneeling, crouching, squatting, reaching.
- The position may have frequent (3-6 hrs) exposure to Noise. Exposure to noise, moving parts and occasional exposure to high/exposed places.
- Frequent lifting, pushing, pulling up to 35 lbs.
- Frequent standing, reaching, handling, and turning.
- Working on elevated and/or uneven surfaces.
- This position requires eye, hearing and other personal protective equipment, frequent (up to 8 hours) of standing, occasional (1-3 Hrs) climbing, balancing, stooping, kneeling, crouching, squatting and working on ladders.
- Use of personal protective equipment for face/eyes and ears may be required.
- This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. § 120.15 is required.
Apply Directly
Assembly
Carr Lane Manufacturing
Saint Louis, MO 63103
OnsiteHealth InsurancePaid Time OffRetirement Benefit
- High School diploma or equivalent
- Communication skills
- Ability to follow directions, strong time management.
- Balancing, Stooping, Kneeling, Crouching, Reaching, Standing, Walking, Pushing, Pulling, Lifting, Picking, Grasping, Feeling, Talking, Hearing, Repetitive Motions
- Manual dexterity
- Close visual acuity
- Subject to noise, hazards, and oils.
- Lift up to 35 lbs
- Pre-employment drug testing is required for employment.
Apply Directly
Mac Tools Route Sales - Full Training
Mac Tools
Saint Louis, MO 63129
OnsiteFlexible Schedule
- A strong credit profile
- An initial down payment
Apply Directly
Assembler - Hiring Now
Sunnen Products Company
Saint Louis, MO 63143
OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Ability to read and interpret blueprints, setup sheets, and specifications.
- Strong mechanical aptitude and attention to detail.
- Basic computer skills for data entry and tracking.
- Basic math skills (including decimals and fractions).
- Familiarity with shop formulas, charts, and measuring devices.
- Regular standing, walking, bending, and lifting.
- Ability to lift up to 50 lbs occasionally.
- Good close-range vision for reading blueprints and precision instruments.
- We require a background and SSN check
- Drug test
- Physical for pre-employment
Apply Directly
Assembler I
Illinois Tool Works
Saint Charles, MO 63301
$21/hr
Onsite
- Education: High School Diploma (or GED) required.
- Computer experience required
- Plant Conditions (100%)
- While performing the duties of this job, the employee will frequently (34% - 66%) be required to bend, squat, twist/turn, and walk, and constantly (67% - 100%) be required to talk, hear, reach outward, stand, and grasp with hands. They will occasionally (1% - 33%) be required to occasionally climb, crawl, reach above shoulder, sit, and type.
- The employee must carry up to 10 pounds constantly, up to 20 pounds frequently, and up to 75 pounds occasionally and push and pull up to 10 pounds constantly, up to 20 pounds frequently, and up to 75 pounds occasionally.
- Specific vision abilities required by this job include concentrated attention, close vision, far vision, depth perception, color vision, and the ability to bring object into sharp focus.
Apply Directly
Tool & Die Setter
ABB
Saint Louis, MO 63103
OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Utility Grade 17 must be able to perform any of the following functions: Die Setter, Slit Line, Auto Press, Punch Press, Annealing Lead and Crane operations in a manner that does not compromise their safety or the safety of coworkers.
- Must be able to perform these tasks for a minimum of 8 hours per day, 5 days a week.
- Always follow the Work Instructions
- Manual lifting requirements up to 50 pounds.
- Must know where Emergency Stops are located for the press you are running.
- Must check Emergency Stops and light curtains to be working properly.
- Verify the Press Release Form (QFSL-A001) is located at the press and is signed by a supervisor before running the press. Note: This must be done with each order.
- Visually inspect parts for burrs, chips, slug marks, bent teeth and missing features.
- Always inspect a part before running on continuous.
- Flatness must be checked 3 times per coil. (Back-to-back flatness check)
- Must verify inventory tags, coil #'s and blueprints match the work order.
- Match the part to the blueprint.
- Always ensure the strip is receiving plenty of lubrication.
- Must keep an eye on the loop between the presses and scrap conveyor to be running.
- The operator will use an air wire twister to wire the stacks of lamination.
- At the end of the die run the operator will turn off the press, dereeler, straightener and the feeder.
- You must fill out a Red Tag for all Non-Con material and move it to the non-Con area.
- Once the flywheel has stopped the operator will remove the end of the coil strip out of the die and save it to be sent to Tool Room with the die, then wipe all the oil off the die and clean area thoroughly.
- You must work safely and pay attention to your surroundings and immediately report injuries, accidents and near misses to Supervisor.
- Operate Cranes as needed
- Ability to understand and follow all ABB safety policies, safety training and hazard communication information.
- This includes but is not limited to wearing proper personal protective equipment (PPE) such as safety glasses, hearing protection, safety shoes, cut resistant gloves, and safety sleeves when required.
- Lift and or carry up to 50 pounds.
- Frequently grip with hands, turn, push, and bend, along with occasionally reaching above shoulder level, and pulling.
- Ability to walk and/or stand for long periods of time and to keep up with the demanding pace of production.
- Possess the dexterity and hand-eye coordination to utilize various hand tools, power tools, and other equipment to complete a variety of complex tasks. Equipment includes but is not limited to electric chain hoists, pneumatic shears, pneumatic wire twisters, electric pallet jacks, manual pallet jacks, and controls with knobs and buttons. The employee must also possess the ability to assist in performing press-line equipment set-up and clearing of die jams.
- Ability to comprehend and follow both written and verbal instructions. Ability to read, write, use a calculator. Must also have the ability to read and comprehend work orders, blueprints, inventory tags, and shipping labels.
- Ability to maintain regular work attendance, including arriving at work on time and remaining at work until the end of the workday schedule.
- Ability to work daily and weekend overtime, including overtime on short notice.
Apply Directly
Car Detailer - FT
Avis Budget Group
Saint Louis, MO 63134
$15.50/hr
OnsiteChat NowHealth InsurancePaid Time OffRetirement Benefit
- Must be 18 years of age and legally authorized to work in the United States
- Valid Driver's License
- Must be able to lift up to 15 pounds and continuously stand, walk, bend, enter and exit vehicles, and drive a variety of vehicles
- This position requires regular, on-site presence and cannot be performed remotely
- Willingness to work outdoors in all weather conditions with a moderate noise level
New, Posted 9 hours ago
Apply Directly
Porter - $18.00/hr
gategroup
Saint Louis, MO 63134
$18/hr
Onsite
- High School Diploma or GED preferred
- Up to one-year experience preferred
- Must be able to read and write to complete required forms
- Communicate effectively with supervisors and co-workers
- Work assigned schedule which may vary and could include weekends and holidays
- Works overtime when required
- Arrives to work on-time
- Must comply with company policies
- Completes paperwork and related administrative duties
- Must be able to lift, push, pull, and move product, equipment and supplies up to fifty (50) pounds frequently during shift
- Regularly stands, bends, lifts, and moves intermittently during shifts of 8+ hours
Apply Directly
Entry-level Lube Tech/Technician
Valvoline Instant Oil Change
Saint Louis, MO 63109
$16.75/hr
OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Entry-Level Lube Technician
- Schedule flexibility (Weekend availability is likely, but we ensure you don't work late nights or holidays)
- English fluency in reading, writing, and speaking
- Stand for up to 8 hours, climb stairs, and occasionally lift up to 50 pounds
- Crouch, bend, twist, and work with your hands above your head
- Be comfortable working in a non-climate-controlled environment
iHire
No Nights. No Weekends. Join Kids Vision for Life!
Kids Vision for Life St. Louis
Maryland Heights, MO 63043
$90/hr
What companies are hiring Diesel Tech jobs in Saint Louis,MO?
- Boeing
- Carr Lane Manufacturing
- Mac Tools
- Sunnen Products Company
- Illinois Tool Works
- ABB
- Avis Budget Group
- gategroup
- Valvoline Instant Oil Change
- Kids Vision for Life St. Louis
- Boeing
- Carr Lane Manufacturing
- Mac Tools
- Sunnen Products Company
- Illinois Tool Works
- ABB
- Avis Budget Group
- gategroup
- Valvoline Instant Oil Change
- Kids Vision for Life St. Louis
What is the hourly salary range for Diesel Tech jobs in Saint Louis,MO?
The hourly salary range is $15.5 - $90.
The hourly salary range is $15.5 - $90.
