Commute Time
Date Posted
Title
Job Type
Benefits
Pay
1271 Crane Operator jobs in Grand Bay,AL
Apply Directly
Shipfitter 1st Class
Ameri-Force
Mobile, AL 36695
~ 26 min OnsiteHealth Insurance
- 5+ years of experience
Apply Directly
Crane Operator
Austal USA
Mobile, AL 36602
~ 26 min Onsite
- 3 years minimum work experience as an overhead crane operator in a shipyard environment or similar industry
- Experience as an operator of vertical lift and telescopic boom F/L's
- Must meet all the physical requirements specified by ASME B30.2
- Ability to follow specific instructions and work with limited supervision
- Must possess a thorough knowledge of equipment used in crane/rigging operations. To include, but not limited to, slings, shackles, clamps, chain hoists, load cells, etc.
- Demonstrated ability to interpret and utilize load charts
- Must have a thorough knowledge of USA Standard hand signals
- Must be able to utilize required personal protective equipment [PPE] as per OSHA standards
- Must be able to respond to verbal and audible sounds/commands
- Must be able to read and comprehend simple instructions, correspondence and memos
- Must be able to effectively present information in one-on-one or small group situations
- 18 years of age or older at time of application
- Able to provide proof of US Person Status
- No felony convictions of Theft/Deception or Violent crimes within seven years from disposition date
- No felony convictions of Drug crimes within three years from disposition date
- Willing to submit to a drug screen
- Willing to submit to a background check
- Must be able to tour all vessels and work sites
- Must have the ability to bend, squat, stoop, crawl, and kneel.
- Perform prolonged standing.
- Ability to turn head from side to side and about the vertical axis.
- Ability to turn body at the waist from side to side and about the vertical axis.
- Lift/push/pull 50lbs to 75lbs on an occasional basis.
- Lift/push/pull up to 20lbs on a frequent basis.
- Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps).
- Ability to work at heights above 12' while working from ladders, scaffolding and/or man lifts.
- Able to work at a variety of levels (ex. waist, eye, overhead).
- Demonstrate the ability to make use of required tools and equipment in a safely appropriate manner.
- Demonstrate good balance while working on uneven surfaces and maneuvering obstacles.
- Possess sufficient handgrip and coordination to carry and operate tools and equipment.
- Ability to utilize personal protective equipment (hardhat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards.
- Ability to withstand cold and hot temperatures.
- Ability to enter 18" x 36" openings and work in confined spaces for prolonged intervals of time.
- Able to respond to verbal and audible sounds/commands.
- Able to utilize adequate visual skills.
- Ability to achieve full arm extension while reaching overhead, reaching out, reaching to the side, and reaching down.
- Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers.
- Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks.
- TOOLS: Will be expected to acquire basic tools on a list to be provided by the Crane/Rigging Manager
Apply Directly
CALIBRATION TECHNICIAN 2
HII
Pascagoula, MS 39567
~ 21 min OnsiteEducation AssistanceHealth InsuranceRetirement Benefit
- Associate's degree or other 2 year technical degree in related discipline
- 1 year experience
- Relocation: No relocation assistance available
- Travel Requirement: No
Apply Directly
Assembler - Hiring Now
NOV
Grand Bay, AL 36541
OnsiteFlexible Schedule
- Offer of employment is contingent upon the completion of background and drug screenings, conducted in accordance with all applicable federal, state, and local laws.
- Willingness to work overtime and flexible shifts as needed
- Ability to work day or night shift
Apply Directly
Automotive Tool Sales/Route Manager - Full Training
Mac Tools
Mobile, AL 36695
~ 26 min OnsiteFlexible Schedule
- A strong credit profile
- An initial down payment
Apply Directly
Welder - Hiring Now
Silver Ships
Theodore, AL 36582
~ 19 min OnsiteHealth InsurancePaid Time Off
- Has nominal aluminum welding experience or passed the AIDT welding course.
- Can perform simple welding task that has little to no quality requirements.
- Has the aptitude and desire to learn the welding process directed by Silver Ships Inc.
- Every skill set from Welder Level 3
- Has the ability to weld to a certain standard instructed by his/her supervisor based on the projects welding requirements.
- Has minimum weld deficiencies that require rework.
- Has the ability to repair any weld deficiencies in a timely matter.
- Complies to the companies welding, safety, and quality standards.
- Every skill set from Welder Level 2
- Proficient in Pulse aluminum GMAW and or GTAW
- Can weld in accordance with given weld schedule depicted on blueprints with little to no supervision required.
- Can pass the certified welder test based on ABS and CWI standards from FMS.
- Must be able to perform basic maintenance and repairs on the welding machines required to perform his/her job.
- Has the ability to work from a blueprint on simple fabricating tasks with constant intermediate supervision from either a foreman or senior fabricator.
- Has less than one year of experience in the aluminum fabricating field.
- Has the ability to work from a blueprint on most standard fabricating tasks with occasional supervision from either a foreman or senior fabricator.
- Has more than a year of experience in the aluminum fabricating field.
- Has the ability to work from a blueprint on all fabricating task, including complicated hull designs and components without any supervision from a foreman or senior fabricator.
- Can be called upon to supervise or advise lesser skilled employees working on similar projects.
- Can perform tasks or projects in the projected or estimated time based on the production schedule.
- Quality is without question.
- Must be able to lift up to 50lbs.
- Must be able to stand, bend, stoop, squat or kneel regularly, as well as climb stairs and ladders to complete tasks.
- Must be able to change your own shielding gas bottle required for welding.
Apply Directly
Pipe Fitter Class 1
Birdon
Bayou La Batre, AL 36509
~ 15 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- High School Diploma or GES
- 5 years of experience as a Pipe Fitter
- Fundamental knowledge in marine or manufacturing industry
- Working knowledge of all hand tools and power tools associated with trade
Apply Directly
Maintenance Technician
Bollinger Shipyards
Pascagoula, MS 39567
~ 21 min Onsite
- High school diploma or equivalent.
- Minimum of 5 years of experience in industrial mechanical maintenance.
- Proven experience in a lead or supervisory role within a maintenance team.
- Strong knowledge of mechanical systems, including hydraulics, pneumatics, and electrical components.
- Ability to read and interpret mechanical drawings, blueprints, and technical manuals.
Easy Apply
Remote Customer Service
Hire Standard Staffing
Grand Bay, AL
$120,000/yr
RemoteHealth Insurance
- Must be a U.S. or Canadian citizen.
- Comfortable using Zoom and other online communication tools.
- No prior insurance experience is required — only a strong drive to succeed and a willingness to learn.
Apply Directly
Field Service Technician / Controls Specialist
Fairbanks Morse Defense
Pascagoula, MS 39567
$5,000 bonus
~ 21 min Onsite
- High School Diploma or GED required
- Associate Degree in Automotive, Diesel, or Power Generation Technology + 4 years' experience in related field (2 years in electrical/motion controls)
- 4 years' experience in related field (3 years in electrical/motion controls)
- Understanding of electrical systems and associated hazards (required)
- Proficiency in electrical test equipment: multimeters, pressure calibrators, signal generators, process meters
- Ability to read and interpret mechanical and electrical line diagrams and blueprints
- Diagnose and repair electrical problems
- Working knowledge of pneumatic, PLC, and electronic engine controls, including:
- End devices: RTDs, Thermocouples, 4–20mA sensors, Relays/Solenoids, Magnetic pickups, Hall Effect proximity sensors
- Allen Bradley PLC (RSLogix 500 and 5000) or equivalent
- HMI programming (PanelBuilder 32, FactoryTalk View ME) or equivalent
- Automation system diagnosis and troubleshooting
- Experience with standby generators and engine operation/maintenance
- Excellent written and verbal communication in English
- Proficiency in Microsoft Office
- Valid driver's license and eligibility for company credit card
- Travel up to 10% for training purposes
- Must hold or obtain U.S. Passport within 3 months of hire
- Must meet NOFORN requirements for access to Unclassified Naval Nuclear Propulsion Information (proof of U.S. Citizenship required)
- Stand, walk, use hands and fingers, handle tools or components
- Reach with hands/arms; stoop, kneel, crouch, or crawl
- Talk, hear, and smell
- Sit and climb/balance frequently
- Vision: close, distant, color, peripheral, depth perception, ability to adjust focus
- Lift at least 35 pounds regularly
- Operate safely according to published safety guidelines
- Wear appropriate PPE per company policies
- Complete annual safety training as scheduled
- Obtain and maintain certification based on internal Service Progression Requirements
- Report all work-related accidents or injuries immediately
- Must be able to obtain basic safety clearance
What companies are hiring Crane Operator jobs in Grand Bay,AL?
- Ameri-Force
- Austal USA
- HII
- NOV
- Mac Tools
- Silver Ships
- Birdon
- Bollinger Shipyards
- Hire Standard Staffing
- Fairbanks Morse Defense
- Ameri-Force
- Austal USA
- HII
- NOV
- Mac Tools
- Silver Ships
- Birdon
- Bollinger Shipyards
- Hire Standard Staffing
- Fairbanks Morse Defense
What is the yearly salary range for Crane Operator jobs in Grand Bay,AL?
The yearly salary range is $120000 - $120000.
The yearly salary range is $120000 - $120000.
