Commute Time
Date Posted
Title
Job Type
Benefits
Pay
1563 Crane Operator Construction jobs in Grand Bay,AL
Apply Directly
Crane Operator
Austal USA
Mobile, AL 36602
~ 26 min Onsite
- 3 years minimum work experience as an overhead crane operator in a shipyard environment or similar industry
- Experience as an operator of vertical lift and telescopic boom F/L's
- Must meet all the physical requirements specified by ASME B30.2
- Ability to follow specific instructions and work with limited supervision
- Must possess a thorough knowledge of equipment used in crane/rigging operations. To include, but not limited to, slings, shackles, clamps, chain hoists, load cells, etc.
- Demonstrated ability to interpret and utilize load charts
- Must have a thorough knowledge of USA Standard hand signals
- Must be able to utilize required personal protective equipment [PPE] as per OSHA standards
- Must be able to respond to verbal and audible sounds/commands
- Must be able to read and comprehend simple instructions, correspondence and memos
- Must be able to effectively present information in one-on-one or small group situations
- 18 years of age or older at time of application
- Able to provide proof of US Person Status
- No felony convictions of Theft/Deception or Violent crimes within seven years from disposition date
- No felony convictions of Drug crimes within three years from disposition date
- Willing to submit to a drug screen
- Willing to submit to a background check
- Must be able to tour all vessels and work sites
- Must have the ability to bend, squat, stoop, crawl, and kneel.
- Perform prolonged standing.
- Ability to turn head from side to side and about the vertical axis.
- Ability to turn body at the waist from side to side and about the vertical axis.
- Lift/push/pull 50lbs to 75lbs on an occasional basis.
- Lift/push/pull up to 20lbs on a frequent basis.
- Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps).
- Ability to work at heights above 12' while working from ladders, scaffolding and/or man lifts.
- Able to work at a variety of levels (ex. waist, eye, overhead).
- Demonstrate the ability to make use of required tools and equipment in a safely appropriate manner.
- Demonstrate good balance while working on uneven surfaces and maneuvering obstacles.
- Possess sufficient handgrip and coordination to carry and operate tools and equipment.
- Ability to utilize personal protective equipment (hardhat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards.
- Ability to withstand cold and hot temperatures.
- Ability to enter 18" x 36" openings and work in confined spaces for prolonged intervals of time.
- Able to respond to verbal and audible sounds/commands.
- Able to utilize adequate visual skills.
- Ability to achieve full arm extension while reaching overhead, reaching out, reaching to the side, and reaching down.
- Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers.
- Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks.
- TOOLS: Will be expected to acquire basic tools on a list to be provided by the Crane/Rigging Manager
New, Posted 1 day ago
Apply Directly
Assembler - Hiring Now
NOV
Grand Bay, AL 36541
OnsiteFlexible Schedule
- Read and follow blueprints, schematics, and work instructions
- Lift up to 15 lbs regularly and up to 50 lbs occasionally
- Perform physically demanding tasks, including standing, walking, bending, and repetitive movement for 8-12 hours per day
- Work overtime and flexible shifts, including day or night schedules, as needed
- Willingness to work overtime and flexible shifts as needed
- Offer of employment is contingent upon the completion of background and drug screenings, conducted in accordance with all applicable federal, state, and local laws
Apply Directly
Welder - Hiring Now
Silver Ships
Theodore, AL 36582
~ 19 min OnsiteHealth InsurancePaid Time Off
- Has nominal aluminum welding experience or passed the AIDT welding course.
- Can perform simple welding task that has little to no quality requirements.
- Has the aptitude and desire to learn the welding process directed by Silver Ships Inc.
- Every skill set from Welder Level 3
- Has the ability to weld to a certain standard instructed by his/her supervisor based on the projects welding requirements.
- Has minimum weld deficiencies that require rework.
- Has the ability to repair any weld deficiencies in a timely matter.
- Complies to the companies welding, safety, and quality standards.
- Every skill set from Welder Level 2
- Proficient in Pulse aluminum GMAW and or GTAW
- Can weld in accordance with given weld schedule depicted on blueprints with little to no supervision required.
- Can pass the certified welder test based on ABS and CWI standards from FMS.
- Must be able to perform basic maintenance and repairs on the welding machines required to perform his/her job.
- Has the ability to work from a blueprint on simple fabricating tasks with constant intermediate supervision from either a foreman or senior fabricator.
- Has less than one year of experience in the aluminum fabricating field.
- Has the ability to work from a blueprint on most standard fabricating tasks with occasional supervision from either a foreman or senior fabricator.
- Has more than a year of experience in the aluminum fabricating field.
- Has the ability to work from a blueprint on all fabricating task, including complicated hull designs and components without any supervision from a foreman or senior fabricator.
- Can be called upon to supervise or advise lesser skilled employees working on similar projects.
- Can perform tasks or projects in the projected or estimated time based on the production schedule.
- Quality is without question.
- Must be able to lift up to 50lbs.
- Must be able to stand, bend, stoop, squat or kneel regularly, as well as climb stairs and ladders to complete tasks.
- Must be able to change your own shielding gas bottle required for welding.
New, Posted 22 hours ago
Easy Apply
Work From Home Benefits Advisor - Entry Level
Hire Standard Staffing
Grand Bay, AL
$120,000/yr
RemoteHealth Insurance
- Must be a U.S. or Canadian citizen.
- Comfortable using Zoom and other online communication tools.
- No prior insurance experience is required — only a strong drive to succeed and a willingness to learn.
New, Posted 1 day ago
Apply Directly
Welder - Hiring Now
Birdon
Bayou La Batre, AL 36509
~ 15 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- 3 years' experience as a Pipe Welder
- High School Diploma or a GED
- Pass a 6G SMAW welding test with 90 days of employment.
- Fundamental knowledge in marine or a manufacturing industry
Apply Directly
WELDER REGULAR APPRENTICE
HII
Pascagoula, MS 39567
~ 21 min OnsiteEducation AssistanceHealth InsuranceRetirement Benefit
- US Citizenship Required for this Position: Yes
- Must be a high school graduate or have completed your GED.
- High school or GED transcript (Not your diploma)
- Any college or vocational transcripts or certificates
- Drivers license or State ID
- DD214 if former military
- Candidates must pass a series of practical welding assignments on various base materials in order to retain the position
New, Posted 1 day ago
Apply Directly
Welder - Hiring Now
Bollinger Shipyards
Pascagoula, MS 39567
~ 21 min Onsite
- **Primary Requirement - 3 years of 1st Class Journeyman marine Welding Experience.**
- Prior experience as a welder or vocational training is acceptable.
- Must be able to weld butts and bulbs in all positions and pass Ultrasonic (UT) and Magnetic Particle (MT) test methods.
- The ability to pass a welding test in the overhead and vertical positions based on certifications being sought.
Apply Directly
Welder - Hiring Now
NSC Staffing
Pascagoula, MS 39581
~ 21 min OnsiteHealth InsuranceRetirement Benefit
- Must pass Alum, CuNi, Stainless, or TIG weld test.
- Must have at least 4 years of pipe welding experience.
- Proven knowledge of welding techniques such as SMAW, FCAW, GMAW, and GTAW.
- Must have experience with P-3 joint with permanent backing rings, and P-14 socket weld joints.
- Must be able to interpret technical drawings, ship repair terminology, and Navy/MSC/ABS standards.
- Ability to work with and care for welding equipment, portable power tools, and hand tools.
- Must be proficient in reading and understanding technical drawings and specifications.
- Strong knowledge of welding theory and the ability to apply it to real-world tasks.
- Ability to lift and carry up to 75 lbs occasionally and up to 20 lbs frequently.
- Must be physically capable of working in confined spaces and at heights above 12 feet.
Apply Directly
Mac Tools Route Sales - Full Training
Mac Tools
Pascagoula, MS 39581
~ 21 min OnsiteUrgently HiringFlexible Schedule
- A strong credit profile
- An initial down payment
Apply Directly
Production Supervisor
Amrize
Theodore, AL 36582
What companies are hiring Crane Operator Construction jobs in Grand Bay,AL?
- Austal USA
- NOV
- Silver Ships
- Hire Standard Staffing
- Birdon
- HII
- Bollinger Shipyards
- NSC Staffing
- Mac Tools
- Amrize
- Austal USA
- NOV
- Silver Ships
- Hire Standard Staffing
- Birdon
- HII
- Bollinger Shipyards
- NSC Staffing
- Mac Tools
- Amrize
What is the yearly salary range for Crane Operator Construction jobs in Grand Bay,AL?
The yearly salary range is $120000 - $120000.
The yearly salary range is $120000 - $120000.
