Home My Resume Saved Jobs Matches Feedback

19 Brazing jobs in Temecula,CA

Apply Directly

Welder - Hiring Now

IMI PLC

Rancho Santa Margarita, CA 92688

$28-$36/hr

~ 1 hr 8 min OnsiteHealth InsurancePaid Time OffRetirement Benefit

Must pass Quality Assurance tests and be certified in at least 4 of the following areas of welding:
Leadership, and ability to influence others.
Gas Metal Arc Welding (MIG) (GMAW)
Oxygen Acetylene (Cutting & Brazing)
The employee must occasionally lift and/or move up to 50 pounds.
While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel; and talk or hear.
Submerged Arc Welding (SAW)
Shielded Metal Arc Welding
High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education or experience.
The noise level in the work environment is usually moderate (office/cubicle environment with computers, fax machines and printers operating) to loud (manufacturing environment with large machinery operating).
Experience / Exposure to Lean Manufacturing.
MUST PASS WELDING TEST
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Gas Tungsten Arc Welding (TIG) (GTAW)
Specific vision abilities required by this job include close vision, and ability to adjust focus.

SmartExplore AI is experimental.

Apply Directly

Maintenance Technician

Solar Turbines Incorporated

San Diego, CA 92154

~ 1 hr 3 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

1 year of maintenance experience
Successful completion of a drug screen
Hand tools and Power Tools
High school diploma, GED, or equivalent

SmartExplore AI is experimental.

Apply Directly

Welder - Hiring Now

M.C. Dean

Encinitas, CA 92024

Requires Travel

Aloft/Climbing / Climbing Shipyard Stairs and Ladders Certification
Apply general rules to specific problems to produce answers that make sense.
See details at close range (within a few feet of the observer).
Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events).
Read and interpret specifications
Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.
Work is primarily in San Diego, CA and Norfolk, VA but you may travel for extended periods to other shipyards in the USA and to other Navy ports outside the USA
May use a standard ladder without exceeding the weight limit while carrying tools.
High School Diploma or GED
Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders.
Read and understand shipboard installation drawings, blueprints, and job orders
Shipyard Competent Person Certification
You must be a US Citizenship eligible for clearance.
Lifts at least 100 pounds at one time and 60 pounds for an extended period of time.
Occupation Safety Haz-Mat Certification
Training and the Ability to Safely Lift and Move Objects of 50 LBS
Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis.
Listen to and understand information and ideas presented through spoken words and sentences.
A minimum of three to five years of applicable welding experience
You must pass a background investigation
Weld parts together using gas welding, or brazing and any combination of arc welding processes
Repair broken or cracked parts, fill holes, and increase size of metal parts
Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English.
Weld in all positions and for all types of metals and alloys in various shapes to include pipes, structural forms, plates, sheet metal, bar stock, machinery and equipment
Working in Confined Spaces Certification
Relocates a 12 foot stepladder without assistance.
ASNT NDT Level II Certification, ore relevant experience.
One (1) other relevant technical certification or qualification such as American Welding Society (AWS) Certified Welding Supervisor, AWS Certified Weld Inspector, or other.
Use a variety of ARC and gas welding equipment to fabricate or repair products such as foundations, cable collars, cable/pipe/vent hangers, cable tube penetrations, studs, etc.
Perform thermal cutting and grinding
You must have a valid driver's license

SmartExplore AI is experimental.

Apply Directly

Pipefitter - 27837

HII

San Diego, CA 92128

Requires TravelEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

Candidate must be able to demonstrate silver brazing ability on needed processes through qualification testing and pass with a satisfactory grade from our Quality Assurance Team within the first three weeks from start date for continued employment.
Must have knowledge and experience with standard pipe fitting procedures, bending processes for tubing and pipe, testing installed piping systems and Class P-3a and P-3b silver brazing processes in accordance with NAVSEA Tech Pub. 7000 and NAVSEA Standard Item 009-12.
Must provide hand tools and trade specific PPE per trades designation.
Must have knowledge of quality control steps and procedures.
Must be able to obtain medical clearance to wear a half-face respirator.
Must be able to travel between 50% - 75% when not assigned to local tasking.
Must have strong knowledge of reading and interpreting drawings, blueprints, weldments, technical manuals, engineering sketches, charts and/or work orders as well as written and verbal instruction for products to be fabricated and/or installed.
Must be able to obtain and maintain a DoD security clearance and maintain clearance level throughout employment.
Selected candidate will be required to travel to shipyards and military bases located around the country and abroad when not assigned to a local task.
Must be able to follow and enforce safety procedures.
Must have High School education or Trade School or equivalent, and 4 years of related experience.
Must be able to work outside of trade specific requirements as team projects require, assisting team members towards task completion.
Must be able to obtain base access credentials within 60 days of start date and maintain credentials throughout employment.
Must be able to work from blueprints, weldments, technical manuals, engineering sketches, charts and/or work orders as well as written and verbal instruction.
Must have experience working in a team environment and be able to communicate effectively with others.