1414 Aviation Engineer jobs in Minneapolis,MN
Apply Directly
Foreman - Sheet Metal (ACM Panels & Large-Scale Standing Seam) 35 to 50 hour DOE
Horizon Roofing
Golden Valley, MN 55416
OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Foreman - Sheet Metal (ACM Panels & Large-Scale Standing Seam)
- Experienced Foreman with a strong background in ACM Panel systems, large-scale standing seam installs, and job management experience
- Has proven experience installing ACM Panels
- Has managed and executed large-scale standing seam installs
- Has demonstrated job management experience
- Can lead crews while maintaining productivity, quality, and safety standards
- Understands commercial sheet metal systems inside and out
- Ability to climb ladders and lift 50+ lbs
- Comfortable working at heights
- Able to work outdoors in varying climates
- No fear of heights
- Must provide your own transportation to job sites and/or shop
- Physical examination
- Drug screening
- Background check
- OSHA and safety guidelines
Apply Directly
Manufacturing Engineer
Collins Aerospace
Burnsville, MN 55306
~ 25 min OnsiteFlexible ScheduleEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.
- Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) unless prohibited by local laws/regulations and minimum 2 years of prior relevant experience or an Advanced Degree in a related field or in absence of a degree, 6 years of relevant experience.
- U.S. Person (U.S. citizen, permanent resident, refugee or asylee) or eligible to obtain necessary export authorizations required.
Apply Directly
Aviation Operations & Support
U.S. Navy
St Anthony Village, MN 55418
New, Posted 1 day ago
Apply Directly
Quality Inspector - New Brighton
Howmet Aerospace
Saint Paul, MN 55112
$25-$35/hr
~ 14 min OnsiteHealth InsurancePaid Time OffRetirement Benefit
- High School Diploma or equivalent.
- Technical training in blueprint reading, Inspection.
- 2-5 years' experience as an inspector in a manufacturing environment; or an equivalent combination of training and experience.
- Full understanding of GD&T; and basic understanding of statistics is required.
- Skilled using a variety of measurement equipment including calipers, pin gage set, height gage, test indicator, micrometer, pitch micrometer, dial indicator, surface plate, optical comparator, laser, smart scope, and coordinate measuring machine (CMM).
- Able to work independently in a fast paced, dynamic production environment.
- Ability to work with minimal supervision.
- Excellent written communication skills necessary.
- Must be adaptable and able to work with regular interruptions.
- Proficient with Microsoft Excel and Word.
- Experience using and ERP system.
- Employees must be legally authorized to work in the United States.
- Verification of employment eligibility will be required at the time of hire.
- Visa sponsorship is not available for this position.
- This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.
Apply Directly
Manufacturing Engineering Technician - 1st Shift
nVent
Anoka, MN 55303
$20.40-$37.80/hr
~ 33 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- High School diploma or AA/AS degree (or other 2-year post high school training)
- Ability to network cross-functionally.
- Ability to show initiative, be a self-starter and be able to work with little to no supervision.
- Ability to adapt to rapidly changing business circumstance and have the ability to thrive in a constantly changing business environment.
- Ability to use computer programs including MS Office, MRP (JD Edwards preferred), SolidWorks, etc. - intermediate level.
- Ability to process engineering change orders (ECO's) as they relate to bills of material and product routings.
- Ability to document processes in work instructions format.
- Knowledge on DFM (Design for Manufacturability) to provide input for new and existing products.
- Knowledge and experience in Lean Manufacturing and Continuous Improvement projects.
- Knowledge of product costing labor and material.
Apply Directly
Tool and Die Maker - Machinist 1st shift (Stamping)
Wilson Tool International
Saint Paul, MN 55110
$41.83-$43.77/hr
~ 14 min Onsite
- 3+ years of experience in tool & die or high-precision machining
- 3+ years of hands-on experience in stamping die build or die design
- Proven ability to independently complete complex setups
- G/M code programming
- GD&T; and blueprint interpretation
- Machinist math (algebra, geometry, trigonometry)
- Strong understanding of tool steels, material properties, and machining strategies
Apply Directly
Tool & Die Maker - 1st Shift
Resideo
Minneapolis, MN 55422
$44.22/hr
$5,000 bonus
OnsiteHealth InsurancePaid Time OffRetirement Benefit
- 4+ years of experience in the construction, alteration, and repair of complicated tools, dies, gages, molds, and special equipment.
- Professional experience operating equipment such as, Wire and Sinker Electrical Discharge Machines (EDM), Computer Numeric Control (CNC) machines, and/or lathes
Apply Directly
Electronic Assembler - 1st Shift
Banner Engineering
Minneapolis, MN 55428
OnsiteFlexible ScheduleEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- High school diploma or GED
- Knowledge of basic math
- Must be able to read and understand English
- Ability to use a computer, hand tools, gauges, and testers
- Attention to detail and quality
- Ability to work independently
- Ability to sit for up to 8 hours per day to perform hand solder with hot soldering iron, inspect boards under a microscope, make simple repairs, etc.
- Uses microscope for precision work and to perform inspections.
- Perform simple hand grasp and dexterity required to solder, encapsulate, correct defects, hold tools, etc.
- Ability to move, carry, or lift objects or materials weighing up to 30 pounds frequently
Easy Apply
PROCESS ENGINEER
Anderson Dahlen
Anoka, MN 55303
$105,000-$150,000/yr
~ 33 min OnsiteHealth Insurance
- Bachelor's degree in chemical engineering, Food Science, Mechanical Engineering, or a related field.
- Minimum of 5 years of experience in food and beverage systems engineering, preferably within a manufacturing or R&D environment.
- Experience in food and beverage manufacturing or process engineering is required.
- Strong understanding of food safety regulations, such as FDA, USDA, or HACCP.
- Familiarity with process control systems and manufacturing equipment.
- Good working knowledge of manufacturing processes, materials, and quality control protocols.
- Knowledge of materials compatibility in food and beverage environments.
- Understanding of food plant design and layout.
- Proficiency with 3D modeling software and report writing programs.
- Excellent communication and technical writing abilities.
- Strong analytical, problem-solving, and project management skills.
- Lift/Carry-0-10 lbs.- Occasionally, 11-50 lbs.- Never, 51-100 lbs.- Never
- Push/Pull-0-25 lbs.- Occasionally, 26-75 lbs.- Never, 76-100 lbs.- Never
- Bend- 0-33% during an 8-hour shift
- Twist/Turn- 0-33% during an 8-hour shift
- Sit- 67-100% during an 8-hour shift.
- Stand/Walk- 0-33% during an 8-hour shift
- Overhead Reaching- 0-33% during an 8-hour shift
- Ladder/Stair- 0-33% during an 8-hour shift
Apply Directly
Machinist III - 2nd shift
RTX
Burnsville, MN 55306
~ 25 min OnsiteFlexible ScheduleEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance
- The ability to obtain and maintain a U.S. government issued security clearance is required
- Security Clearance Type: DoD Clearance: Secret
- Active and existing security clearance required after day 1
- Typically requires HS diploma (or equivalent, e.g. G.E.D in the US) or vocational/technical education in related discipline with a minimum of 2 years of relevant experience
- 3+ years of manual Mill/Lathe experience
Apply Directly
Associate Field Application Engineer
Avnet
Edina, MN 55423
OnsiteFlexible ScheduleEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Applicants for this position must be authorized to work for any employer in the U.S.
- We are unable to sponsor or take over sponsorship of an employment visa.
- Candidates MUST be a U.S. citizen.
- Bachelors degree or equivalent experience from which comparable knowledge and job skills can be obtained.
- Minimum experience required is typically less than 2 years with bachelor's or equivalent.
- A willingness to relocate for career advancement is essential.
What companies are hiring Aviation Engineer jobs in Minneapolis,MN?
- Horizon Roofing
- Collins Aerospace
- U.S. Navy
- Howmet Aerospace
- nVent
- Wilson Tool International
- Resideo
- Banner Engineering
- Anderson Dahlen
- RTX
- Avnet
- Horizon Roofing
- Collins Aerospace
- U.S. Navy
- Howmet Aerospace
- nVent
- Wilson Tool International
- Resideo
- Banner Engineering
- Anderson Dahlen
- RTX
- Avnet
What is the hourly salary range for Aviation Engineer jobs in Minneapolis,MN?
The hourly salary range is $20.4 - $44.22.
The hourly salary range is $20.4 - $44.22.
