Commute Time
Date Posted
Title
Job Type
Benefits
Pay
1207 Assembler Manufacturing jobs in Costa Mesa,CA
Apply Directly
Junior Assembly Technician
Huish Outdoors LLC
Costa Mesa, CA 92626
Onsite
- Physical Activities include long periods of standing.
- Able to use hand and power tools that may require wrist movements.
- Able to read and understand work instructions, schematics
- Manual dexterity and good hand-eye coordination.
- Able to walk in tight, small production spaces.
- Able to use and comprehend specialty tools and torque wrenches a must
- Follow and complete travelers required
- 1 -2 years working in a production/assembly environment
- Lifting up to 50 lbs.
- Travel expectations 0%
Apply Directly
Assembler - Home Center - CA
Advantage Solutions
Costa Mesa, CA 92626
OnsiteChat NowFlexible Schedule
- Can stand, kneel, and bend for several hours a day
- Can perform physical work of moving, bending, standing and can lift up to 75 lbs.
- Are interested in working on a temporary, part-time basis
- You are 18 years or older
- Can use your smartphone or tablet to record work after each shift
- Have a valid driver's license and access to reliable vehicle
- Love to tinker and build stuff, and are experienced in assembling grills, patio furniture etc.
Apply Directly
Manufacturing Tech Pharmaceuticals
McGuff Companies
Santa Ana, CA 92725
Apply Directly
Manufacturing Operator - 90-Day Increase Eligible
TTM Technologies
Santa Ana, CA 92701
~ 19 min OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Must have very good concentration and must be able remain focused with minor interruptions.
- This position requires the individual to perform the entire shift while standing.
- Basic computer skills a must.
- At least 1-2 years work experience of Copper Plating background in lieu of educational requirement.
- Must be able to lift 50lbs. Practice proper lifting techniques at all times.
- Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services.
- Basic mathematical and reasoning ability required.
Easy Apply
Material Handler
Adecco
Santa Ana, CA 92704
$20/hr
~ 19 min OnsiteFlexible ScheduleHealth InsurancePaid Time OffRetirement Benefit
- High school diploma or GED.
- Must be able to work overtime as required.
- Familiarity with Oracle ERP systems, inventory management software, and Microsoft Office Suites.
- Minimum two years of experience in shipping, receiving, and kitting in a manufacturing environment.
- Must have a valid Driver's license.
- Ability to operate warehouse machinery such as forklifts, pallet jacks, and lift devices.
New, Posted 12 hours ago
Apply Directly
Assembly Operator II
ITT Cannon LLC
Irvine, CA 92618
~ 15 min OnsiteHealth InsurancePaid Time OffRetirement Benefit
- High school diploma or equivalent
- Able to read, write and speak English.
New, Posted 1 day ago
Apply Directly
Manufacturing Technician - Hiring Now
Microchip Technology
Garden Grove, CA 92843
~ 21 min OnsiteHealth InsuranceRetirement Benefit
- Physical Attributes: Carrying, Crouching, Feeling, Foot Controls, Handling, Hearing, Kneeling, Lifting, Noise and/or vibration, Pulling, Pushing, Reaching, Seeing, Talking, Works Alone, Works Around Others
- Specialized Tooling: Extensive experience designing and building jigs, work platforms, and specialized hand tools required for the precision assembly of small components
- Material & Process Knowledge: Expert in parts cleaning, plating, and heat-treating (Rockwell hardness testing). Ability to select alloys based on tensile strength, wear, and heat tolerance
- Machining Mastery: Deep technical expertise in manual and CNC milling (NC machines), surface grinders, and lathes. Comprehensive understanding of stampings, progressive dies, wire EDM, and the integration of these processes in small component manufacturing
- Software Proficiency: Highly proficient in SolidWorks and AutoCAD for 3D modeling and 2D drafting; experience using these tools to generate tool paths and manufacturing layouts
- Design & Fabrication experience as a Tool and Die, Jigs, and Fixtures Design Engineer. Proven ability to not only design but also personally fabricate jigs and fixtures for complex manufacturing environments
- Physical Requirements: Able to lift, push, pull 25 lbs; carry 15 lbs; sit 10%; stand 60%; walk 40%; must be able to perform activities that include stooping, reaching, handling, hearing, talking, seeing, work alone, work around others
- Travel Time: 0% - 25%
- End-to-End Development: Must be able to initiate tool concepts for existing or new processes, investigate design options, and drive development from initial DWG through NC programming to final completion
- U.S. Export Controls Requirements: This job requires access to technology, materials, software or hardware that is controlled by the export laws of the United States. Candidates are required to provide proof of either US citizenship, Permanent US residency or classification as a protected individual as defined in 8 USC 1324b (a) (3).
- 0-2 years of experience with a diploma from an accredited trade school or equivalent
Apply Directly
Assembly D
L3 Harris
Anaheim, CA 92805
~ 23 min OnsiteBilingual PreferredEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Minimum 4-7-year experience assembling electro/mechanical sub-assemblies, major assembles and cabinetry for hardware and systems built to quality requirements as stated above, preferably to military requirements and specifications.
- L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
- Knowledge of drawings, parts lists, Engineering Change Orders (ECO), wiring lists and shop order.
- Security clearances may only be granted to U.S. citizens.
- Background knowledge of processes and procedures involved in the assembly and rework of complex assemblies and military hardware.
- Please be aware many of our positions require the ability to obtain a security clearance.
- Must possess excellent assembly blueprint reading skills.
- Lift, move or manipulate heavy parts and assemblies ranging up to 50 lbs.
- Requires a High School Diploma or equivalent and a minimum of 8 years of prior relevant experience or 2 years post-Secondary/Associates Degree with a minimum of 4 years of prior related experience.
- Possesses hand soldering skills and knowledge of ANSI-J-STD-001 as required.
- Must thoroughly understand the sequence of events and technical issues related to customer returns.
- Have a working knowledge of computers and the ability to record/update assembly status as needed.
Apply Directly
Assembler - Hiring Now
Votaw Precision Technologies, LLC
Santa Fe Springs, CA 90670
$25-$35/hr
~ 35 min Onsite
- Knowledge of flight hardware, tooling and ground support
- Minimum six years' experience as Assembler; including prior experience in Aerospace/Manufacturing setting.
- Set up and operate band saws, milling machines, lathes, surface grinders, hoist/crane equipment, etc.
- Ability to lift and carry objects weighing from 15 to 50 pounds.
- Must know assembly, bonding, composite materials, riveting, and other processes associated with tool shop jobs
- Advanced math skills (Algebra, Trigonometry, GD&T; Math)
- Knowledge in use of hand tools (drill motors, grinders, basic measurement Instruments, etc.)
- Requires the ability to read and interpret engineering drawings and specifications
- This position requires the use of information or access to hardware subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons as defined by ITAR.
Apply Directly
Maintenance Technician
Jobot
Huntington Beach, CA 92605
$28-$36/hr
Education AssistanceHealth InsurancePaid Time OffRetirement Benefit
What companies are hiring Assembler Manufacturing jobs in Costa Mesa,CA?
- Huish Outdoors LLC
- Advantage Solutions
- McGuff Companies
- TTM Technologies
- Adecco
- ITT Cannon LLC
- Microchip Technology
- L3 Harris
- Votaw Precision Technologies, LLC
- Jobot
- Huish Outdoors LLC
- Advantage Solutions
- McGuff Companies
- TTM Technologies
- Adecco
- ITT Cannon LLC
- Microchip Technology
- L3 Harris
- Votaw Precision Technologies, LLC
- Jobot
What is the hourly salary range for Assembler Manufacturing jobs in Costa Mesa,CA?
The hourly salary range is $20 - $36.
The hourly salary range is $20 - $36.
