761 Assembler I 2nd Shift jobs in Oklahoma City,OK

Composite Assembler I-III
Must be able to demonstrate accurate basic math skills
Must be able to demonstrate good attention to detail resulting in the production of high-quality parts
Must be able to demonstrate ability to use hand tools
Must be able to demonstrate the accurate use of a tape measure
Ability to maintain sensitive and confidential information as required by government standards
Ability to interact effectively with peers and supervisors
Ability to interact appropriately with the public when necessary
Ability to adhere to workplace rules
Requires high school education or equivalent
Hands-on experience in manufacturing production
2-3 years hands-on experience in composite manufacturing
5+ years hands-on experience in composite manufacturing
Experience with Vacuum Bagging, and various forms of Lamination repair
Office and manufacturing environment
Ability to stand and sit for long periods of time
Ability to perform repetitive motion
Employee may generate, handle, manage, or work around hazardous materials and hazardous wastes
May be required to lift up to 50 pounds in accordance with KUAS General Safety Training guidelines

Customer Service Rep - Tech Products (Seasonal, Remote)

Concentrix

Oklahoma City, OK 73163

Hubbell Incorporated

Oklahoma City, OK 73135

Full mask respirator with carbon filters or make up air, full paint suit, and gloves must be worn at all timed during the coating process to protect the painter from fumes and particles.
Regular attendance and punctuality are required.
Overtime, including weekends, as needed could be mandatory.
Must wear all PPE required for the specific work area.
Regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 54 pounds.
Requires long periods of standing.
Ability to move about the facility moving product.
Knowledge of proper use of safety equipment; i.e. safety glasses, ear plugs, and work boots where necessary.
Wet coat surfaces of manufactured products with epoxy and urethane coatings.
Adjust valves on spray gun to regulate width and pressure of spray.
Pull trigger and direct spray onto work surface to apply prime or finish coat.
Apply masking tape and or caps to protect parts and components that are not to be coated.
Inspect own work for conformity to standards.