Commute Time
Date Posted
Title
Job Type
Benefits
Pay
2611 Apprentice Plumbing jobs in Seattle,WA
New, Posted 1 day ago
Easy Apply
General Laborer - Billboard Installer
Lamar Advertising Company
Seattle, WA 98127
$27-$33.25/hr
OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Ability to safely use construction equipment, in regards to the construction and maintenance of outdoor structures
- Working knowledge of fabrication skills and techniques
- Ability to complete OSHA 10-hour Construction course required
- Ability to work from ladders and to carry a ladder and/or other tools to the worksite from vehicle
- A valid driver's license is required
- Ability to comply with Lamar safety standards while performing work
- Skill in setting priorities which accurately reflect the relative importance of job responsibilities
- Or some equivalent combination of education and experience
- General knowledge of Lamar, Department of Transportation (DOT), and Occupational Safety and Health Administration (OSHA) safety regulations
- Skill in the practical applications of mathematics, in relation to construction and operations tasks
- Working knowledge of electrical skills and techniques
- Skill in reading technical documents, such as blueprints and diagrams
- Basic computer skills including Internet navigation and Microsoft Word & Excel
- Upon submitting your application, you will be asked to complete an 8-15 minute personality assessment.
- Ability to document installations, through photographs and written logs
- Ability to climb heights and work at heights above ground safely
- A high school diploma or equivalent is required
New, Posted 3 hours ago
Apply Directly
Driver Helper (Seasonal)
Anheuser-Busch
Renton, WA 98055
$27.76/hr
~ 29 min Onsite
- Ability to drive Non-CDL truck
- High school diploma or GED required (no degree required for any position within AB ONE Wholesalers!)
- Ability to lift, load, unload, and move products weighing up to 165 pounds and fulfill all physical requirements of the job
- Ability and willing to work flexible hours including nights, weekends, and/or holidays
- Must have a valid Drivers License and safe driving record
- Must be at least 21 years of age
- Ability to work in a wide temperature variation (36°-Temperature outside)
Apply Directly
Maintenance Mechanic - Hiring Now
Boeing
Renton, WA 98057
$45.65/hr
~ 29 min OnsiteHealth InsuranceRetirement Benefit
- Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
- Experience working with precision measuring tools.
- Completion of an English course with a grade of 90 or better.
- * Basic Precision Measuring Tools or equivalent
- **Vocational Courses:**
- Proficiency in math and English must be verified through one of the following:
- Experience reading engineering blueprints/drawings.
- Candidates must live in the immediate area or relocate at their own expense.
- Pay: $45.65/hour, with potential to earn up to $61.01/hour in accordance with the relevant collective bargaining agreement.
- Completing Intermediate Algebra or a higher-level math course within the last 5 years.
- * Maintenance Technician (facility or plant)
- Applicants must not have previously enrolled in or completed an IAM/Boeing Joint Apprenticeship program.
- **This position must meet Export Control compliance requirements, therefore a \"US Person\" as defined by 22 C.F.R. \\u00a7 120.62 is required. \\"US Person\\" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.**
- This position is for 1st shift
- This position must meet Export Control compliance requirements, therefore a \"US Person\" as defined by 22 C.F.R. § 120.62 is required. \"US Person\" includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
- * Plumbing /Pipefitting Assistant or Helper
- Proficiency in reading, writing, and speaking English.
- **Relevant Work Experience: A minimum of one year of work experience in a similar field, such as:**
- Experience doing jobs or tasks where you had to apply math skills such as algebra, geometry and/or trigonometry.
- * Basic Blueprint Reading or equivalent
- * Building/Facilities Maintenance Worker
- **Qualification for Blueprint Reading: You can meet the qualifications through one of the following methods, which will be verified via your resume, work history, and transcripts:**
New, Posted 2 hours ago
Apply Directly
Pick & Pack $24.00 /HR.
gategroup
Seattle, WA 98164
$24/hr
Onsite
- Communicate effectively with supervisors and co-workers
- Must be able to handle liquor/alcoholic beverages
- High School Diploma or GED is preferred
- Arrives to work on-time
- Up to one-year experience preferred
- Works overtime when required
- Regularly stands, bends, lifts, and moves intermittently during shifts of 8+ hours
- Must be able to lift, push, pull, and move product, equipment and supplies up to fifty (50) pounds frequently during shift
- Complies with company policies
- Completes paperwork and related administrative duties
- Must be able to read and write to complete required forms
- Works assigned schedule which may vary and could include weekends and holidays
Apply Directly
Maintenance Technician - 1st Shift.
ConAgra Foods
Kent, WA 98032
$35/hr
~ 31 min OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Must maintain regular attendance.
- Report food safety problems to personnel with authority to initiate action.
- Must follow all plant work, safety, food safety, and GMP standards.
- 2 years previous experience in electrical controls, hydraulics, pneumatic and ammonia refrigeration in a food manufacturing environment.
- Refrigeration operator's license.
- High School diploma or equivalent
New, Posted 21 hours ago
Apply Directly
Installation Technician | Weekly Pay | Paid Training
Safe Haven Security
Edmonds, WA 98026
~ 22 min OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Must be able to obtain or possess a valid driver's license and driving history must meet company standards throughout employment.
- Frequent bending, crouching, reaching, and maintaining balance while working on ladders or at elevated heights.
- High School diploma, or equivalent.
- Ability to use hand and power tools, and the ability to handle small components accurately.
- Ability to lift, carry, and position heavy objects up to 50 pounds, potentially overhead or in awkward positions.
- Sustained periods of standing, climbing on ladders, and maneuvering in tight spaces.
- Keen eyesight for detailed work.
- Must be able to obtain or possess an alarm agent permit where applicable and according to Federal, State, and Municipal laws.
- The ability to obtain or possess basic tools necessary for the job duties.
- Ability to drive personal vehicle for long periods of time throughout the day.
- Auto insurance coverage must meet company standards throughout employment.
- Capability to work in diverse indoor and outdoor environments, enduring temperature fluctuations and inclement weather.
New, Posted 9 hours ago
Apply Directly
Journeyman Pipefitter
Vigor, LLC
Seattle, WA 98154
OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Transfers materials on/off bench, pallet, and install on vessel. Requires vertically/horizontally transferring materials weighing up to (75 lbs.) from (4") to (48"), up to (10/hr.), a distance of up to (25 feet) without mechanical assistance.
- Accesses pipe systems, works off manlifts, scaffolding. Must tolerate heights up to (100 ft.).
- Four-hour fire watch certification must be obtained within 30 days of hire
- Performs rigging (as applicable to pipe and valve systems) - standards, terms, signals and safe working loads.
- Vigor Industrial LLC and its wholly owned subsidiaries are drug, smoke and vape-free workplaces.
- Prospective employees must pass a drug and alcohol test and background check as pre-employment screening.
- Sits to weld. Requires tolerance of seated posture up to (45 min.) continuously, for a total of up to (6 hr.) per (8 hr.).
- Tests and operates hydro pumps up to 5,000 psi.
- Successfully performs work as an individual, as a member of a single craft, or a multi-craft work crew.
- Reads blueprints to identify locations of various pipe systems.
- Transfers fabricated parts on/off shop table, pallet. Requires vertically transferring fabricated parts weighing up to (40 lbs.) from (4") to (40"), up to (20/hr.).
- Accesses vessels, job locations. Requires climbing stairs up to 180 steps/hr. in (8 hr.).
- Safety equipment required: must wear welding helmet, hard hat, clothing with no holes, long sleeve shirts, eye protection, respirator, hearing protection, and leather shoes.
- Accesses shop, tools, materials, vessels, job location. Requires walking up to (3.0 mi.) in (8 hr.).
- Transfers pipe, valves, tools, welding stinger to/from area of need. Requires vertically transferring pipe, valves, tools, welding stinger weighing up to (10 lbs.) from (4") to (76"), up to (60/hr).
- Accesses tanks, scaffolding. Requires climbing ladder up to 200 rungs/hr. in (8 hr.).
- Makes competent weldments, i.e., targeting pipe and hanger.
- Accesses interior of pipes to weld same. Must work in spaces with limited headroom of (24").
- Uses a tape measure.
- Positions, adjust pipes, valves into position. Must horizontally transfer pipes, valves requiring a force up to (60 lbs.), up to (6/hr.), a distance up to (2 ft.).
- Works outdoors: Frequently exposed to prevailing weather conditions.
- Performs work with minimal supervision.
- Successful job candidates will be asked to provide documentation of their US Persons status.
- High school diploma or GED preferred.
- Lays out, targets and fabricates various pipe (P-1 and below) to quality assurance standards.
- Determines sizes and schedules of pipes/take off of fittings (90o, 45o, and tees) utilized in the fabrication and/or repair of systems.
- Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- Requires (near/far/depth/color) vision to operate pipe threading machine, pipe bender, Oakey beveler; to fit, weld, layout pipe; to read tape measure.
- Talking, Hearing, Vision, Near Acuity (clarity of vision at 20 inches or less), Far Acuity (clarity of vision at 20 feet of more), Depth Perception (three-dimensional vision to judge distance/ spatial relationships), Color Vision (if required to distinguish colors for job performance or safety), Field of Vision (if required to observe a large field of vision while keeping eye fixed on a given point for job performance or safety), and Smell.
- Operation of equipment/tools/vehicles: Uses (1-1/2 to 3 ton capacity) pipe threading machines, pipe bender, Oakey bevelers, positioners, grinders, drill motors/presses, portaband, sawsall, tape measure, cutting torch, overhead crane, lift truck, hand power tools including chainfall, portapower, compressed gas tank and wire feeders.
- 5 years relevant work experience.
- Incumbent performs similar work in all areas of the Yard as the need arises.
- Works indoors: Frequently works indoors in environments which may have fumes, chemicals and heat, as well as noise and dust present, depending upon the location of the pipe.
- This role is with a federally contracted employer and is subject to regulations that restrict employment to US Persons only (i.e. US Citizens, lawful permanent residents, legally recognized asylees and refugees, and persons protected under INA).
- Other Exposures: May be exposed to vibrations, smoke, acids, degreasing cleaners, fumes, free silica, asbestos, dust, welding, solvents, oil, grease, and raw sewage; works in confined spaces.
- Successfully completes sustained work at various heights, including, but not limited to 100 feet.
- Accesses tanks, bilge areas. Accesses spaces with specific entries (18") x (24").
- Traces, disassemble, assemble, layout, weld pipe systems aboard vessels. Requires repetitive assumption of posture to access a point (1 inches) from the floor up to (60/hr.).
- Disassembles/assembles and/or repair of shipboard systems.
- Stands to operate pipe threading machine, pipe bender, Oakey beveler; to fit, weld, layout pipe. Requires tolerance of standing posture up to (50 min.) continuously, for a total of up to (6 hr.) per (8 hr.).
- Properly cares for and safely uses hand and power tools and all company property.
- HAZWOPER -First Responder Awareness Level
- Sets up and operates flushing machine.
- Traces various pipe systems aboard vessels, including steam, lube oil, salt water, fresh water, hydraulics, cargo, crude oil and/or product, compressed air, etc.
- Operates pipe threading machine, pipe bender, and Oakey bevelers.
- Places rod in welding stinger, advance flex core wire feed, use power tools such as impact wrenches, grinders requiring coupling forces up to (25 lbs.), up to (60/hr.).
- Transfers parts (spools) to/from area of need. Requires vertically/horizontally transferring parts (spools) weighing up to (40 lbs.) from (4") to (76"), up to (4/hr.), a distance of up to (25 feet) without mechanical assistance.
New, Posted 1 day ago
Apply Directly
Quality Inspector 3
Triumph Group
Redmond, WA 98053
$28.33-$40/hr
~ 18 min Onsite
- A minimum of 5-7 years in quality inspection/machining (final, source and in process inspection) working in a manufacturing environment
- Must have working knowledge of geometric tolerancing, gages, micrometers, borescopes and other measuring tools
- High School or Technical School Diploma or equivalent.
- U.S. applicants must be legally authorized to work in the United States without company sponsorship.
- Ability to apply geometry and trigonometry skills to solve problems and calibrate equipment
Easy Apply
Assembly Line Worker - Weekly Pay
Adecco
Everett, WA 98208
$21-$22.50/hr
~ 31 min OnsiteFlexible ScheduleHealth InsurancePaid Time OffRetirement Benefit
- Minimum of a year's worth of experience in a warehouse environment
- Availability to work a flexible schedule, with possible overtime as needed
- Comfortable standing, walking, or sitting for extended periods of time and performing physical tasks such as bending, squatting, twisting, pushing, and pulling
- High School Diploma or GED
- Use of information or access to facilities subject to the ITAR and/or EAR regulations may limit access
New, Posted 14 hours ago
Apply Directly
Administrative Assistant
Pacer Group
Seattle, WA 98127
No Experience
What companies are hiring Apprentice Plumbing jobs in Seattle,WA?
- Lamar Advertising Company
- Anheuser-Busch
- Boeing
- gategroup
- ConAgra Foods
- Safe Haven Security
- Vigor, LLC
- Triumph Group
- Adecco
- Pacer Group
- Lamar Advertising Company
- Anheuser-Busch
- Boeing
- gategroup
- ConAgra Foods
- Safe Haven Security
- Vigor, LLC
- Triumph Group
- Adecco
- Pacer Group
What is the hourly salary range for Apprentice Plumbing jobs in Seattle,WA?
The hourly salary range is $21 - $45.65.
The hourly salary range is $21 - $45.65.
