890 Apprentice Lineman jobs in Hurley,MS
New, Posted 1 day ago
Apply Directly
PIPEFITTER - SKILLED
HII
Pascagoula, MS 39581
$39.04/hr
~ 42 min OnsiteEducation AssistanceHealth InsuranceRetirement Benefit
- 2 yrs of marine, industrial or petro-chemical pipefitting experience
- Completed high school or equivalent pipefitting technical program with NCCER certification
Jobcase
Corrosion Control Inspector (NACE) Navy (5019)
Three Saints Bay
Pascagoula, MS 39567
Apply Directly
Corrosion Control Inspector (NACE) - Navy (5019)
Three Saints Bay, LLC
Pascagoula, MS 39581
~ 42 min Onsite
- National Association of Corrosion Engineers certification (NACE) – Must be certified by National Association of Corrosion Engineers. Must provide documentation at time of award.
- Graduate of high school, trade school, industrial school, or correspondence school in which credits were received in algebra, plane geometry, trigonometry, and physics.
- Five (5) years of experience in the prevention and control of corrosion and in hull, topside, interior, and deck surface coating systems with Navy ships.
- Five (5) years of experience with the application of the regulations of the Clean Air Act, NESHAP, EPA, OSHA, ASTM 718F, and the Material Data Safety Sheet with regard to VOC compliance.
- Familiar with corrosion control policy guidance and technical support at the Program level for NAVSEA organization, for example, in support of PEO SHIPS PMS 400D with regards to AEGIS Class (DDG-51 and CG-47) Ships.
- Five (5) years experience Conducting surveys of underwater hull, topside, interior, and decks to determine the effectiveness of specific corrosion control systems such as attendance at Surface Ship Availabilities.
- Experience reviewing and providing technical guidance on specifications being repaired for corrosion control systems to be installed on surface ships, ship construction, maintenance, and repair.
- Experience providing technical guidance concerning the techniques involved in the inspection of preparation and application of corrosion protection systems.
New, Posted 1 day ago
Easy Apply
Precision Technician (2nd Shift)
Nextaff
Ocean Springs, MS 39564
$16/hr
~ 44 min Onsite
- Associate's degree or 2+ years of post-secondary education/training (or equivalent technical aptitude)
- Strong mechanical reasoning and problem-solving ability
- Comfort with math, measurements, and precision work
- High personal standards and attention to detail
- Physical ability to stand for long periods and lift up to 40 lbs
- Must pass mechanical aptitude test, drug screen, and background check
HOT SHOT DRIVERS WANTED $4K/WEEK
R and J Hotshots
Mobile, AL 36618
$4,000/wk
Apply Directly
Quality Assurance Inspector A (Pipe Inspector)
Bollinger Shipyards
Pascagoula, MS 39581
~ 42 min Onsite
- High School diploma with 5-10 years of broad shipyard experience in various craft areas required.
Apply Directly
Crane Operator
Austal USA
Mobile, AL 36695
~ 47 min Onsite
- 3 years minimum work experience as an overhead crane operator in a shipyard environment or similar industry
- Experience as an operator of vertical lift and telescopic boom F/L's
- Must meet all the physical requirements specified by ASME B30.2
- Ability to follow specific instructions and work with limited supervision
- Must possess a thorough knowledge of equipment used in crane/rigging operations. To include, but not limited to, slings, shackles, clamps, chain hoists, load cells, etc.
- Demonstrated ability to interpret and utilize load charts
- Must have a thorough knowledge of USA Standard hand signals
- Must be able to utilize required personal protective equipment [PPE] as per OSHA standards
- Must be able to respond to verbal and audible sounds/commands
- Must be able to read and comprehend simple instructions, correspondence and memos
- Must be able to effectively present information in one-on-one or small group situations
- TOOLS: Will be expected to acquire basic tools on a list to be provided by the Crane/Rigging Manager
- Must be able to tour all vessels and work sites.
- Must have the ability to bend, squat, stoop, crawl, and kneel.
- Perform prolonged standing.
- Ability to turn head from side to side and about the vertical axis.
- Ability to turn body at the waist from side to side and about the vertical axis.
- Lift/push/pull 50lbs to 75lbs on an occasional basis.
- Lift/push/pull up to 20lbs on a frequent basis.
- Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps).
- Ability to work at heights above 12' while working from ladders, scaffolding and/or man lifts.
- Able to work at a variety of levels (ex. waist, eye, overhead).
- Demonstrate the ability to make use of required tools and equipment in a safely appropriate manner.
- Demonstrate good balance while working on uneven surfaces and maneuvering obstacles.
- Possess sufficient handgrip and coordination to carry and operate tools and equipment.
- Ability to utilize personal protective equipment (hardhat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards.
- Ability to withstand cold and hot temperatures.
- Ability to enter 18" x 36" openings and work in confined spaces for prolonged intervals of time.
- Able to respond to verbal and audible sounds/commands
- Able to utilize adequate visual skills.
- Ability to achieve full arm extension while reaching overhead, reaching out, reaching to the side, and reaching down.
- Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers.
- While performing the duties of this job, the employee should expect to encounter exposure to humid conditions, bright flashing lights, moving mechanical parts, high precarious places, outside weather conditions, and extreme heat.
- The employee should expect to encounter, on occasion, exposure to fumes and/or airborne particles at or below the PEL, toxic or caustic chemicals, and heat and cold.
- The noise level in the work environment is usually very loud, + 90 dB.
- Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks.
- 18 years of age or older at time of application
- Able to provide proof of US Person Status
- No felony convictions of Theft/Deception or Violent crimes within seven years from disposition date
- No felony convictions of Drug crimes within three years from disposition date
- Willing to submit to a drug screen
- Willing to submit to a background check
New, Posted 1 day ago
Easy Apply
Heavy Equipment Operator
Express Employment
Mobile, AL 36608
~ 47 min Onsite
- High school diploma or equivalent
- Proven experience operating heavy machinery, preferably in underground utility work
- Valid driver's license and a clean driving record
- Read and interpret blueprints and technical drawings
- Physical stamina and the ability to work in various weather conditions
- Conduct daily inspections of the work area to identify potential hazards and maintain compliance with all safety protocols, including proper use of PPE
Apply Directly
Welder/Fitter Week Shift
Silver Ships
Theodore, AL 36582
~ 49 min OnsiteHealth InsurancePaid Time Off
- Has nominal aluminum welding experience or passed the AIDT welding course.
- Can perform simple welding task that has little to no quality requirements.
- Has the aptitude and desire to learn the welding process directed by Silver Ships Inc.
- Every skill set from Welder Level 3
- Has the ability to weld to a certain standard instructed by his/her supervisor based on the projects welding requirements.
- Has minimum weld deficiencies that require rework.
- Has the ability to repair any weld deficiencies in a timely matter.
- Complies to the companies welding, safety, and quality standards.
- Proficient in Pulse aluminum GMAW and or GTAW
- Can weld in accordance with given weld schedule depicted on blueprints with little to no supervision required.
- Can pass the certified welder test based on ABS and CWI standards from FMS.
- Must be able to perform basic maintenance and repairs on the welding machines required to perform his/her job.
- Must be able to lift up to 50lbs.
- Must be able to stand, bend, stoop, squat or kneel regularly, as well as climb stairs and ladders to complete tasks.
- Must be able to change your own shielding gas bottle required for welding.
- Has the ability to work from a blueprint on simple fabricating tasks with constant intermediate supervision from either a foreman or senior fabricator.
- Has less than one year of experience in the aluminum fabricating field.
- Has the ability to work from a blueprint on most standard fabricating tasks with occasional supervision from either a foreman or senior fabricator.
- Has more than a year of experience in the aluminum fabricating field.
- Has the ability to work from a blueprint on all fabricating task, including complicated hull designs and components without any supervision from a foreman or senior fabricator.
- Can be called upon to supervise or advise lesser skilled employees working on similar projects.
- Can perform tasks or projects in the projected or estimated time based on the production schedule.
- Quality is without question.
- Must be able to change your own shielding gas bottle required for stitch welding.
Heavy Equipment Operator
Blue World Pools
Moss Point, MS 39562
New, Posted 1 day ago
Remote Online Tasks – Earn Up to $1,500/month Playing Games
Free Cash
Hurley, MS 39555
$1,500/mo
Remote
What companies are hiring Apprentice Lineman jobs in Hurley,MS?
- HII
- Three Saints Bay
- Three Saints Bay, LLC
- Nextaff
- R and J Hotshots
- Bollinger Shipyards
- Austal USA
- Express Employment
- Silver Ships
- Blue World Pools
- Free Cash
- HII
- Three Saints Bay
- Three Saints Bay, LLC
- Nextaff
- R and J Hotshots
- Bollinger Shipyards
- Austal USA
- Express Employment
- Silver Ships
- Blue World Pools
- Free Cash
What is the hourly salary range for Apprentice Lineman jobs in Hurley,MS?
The hourly salary range is $16 - $39.04.
The hourly salary range is $16 - $39.04.
