584 Aircraft Engine jobs in Mobile,AL
Apply Directly
Marine Outfitter
Silver Ships
Theodore, AL 36582
~ 23 min OnsiteHealth InsurancePaid Time Off
- Ability to read a tape measure
- Familiarity with operation of power/cutting tools
- Installs various outboards (with instruction)
- Installs various types of equipment (with instruction)
- Installation of all wiring, fuel and control and oil systems (with instruction)
- Install correct size and approved fuel, exhaust and water hoses (with instruction)
- Installs steering systems in accordance with OEM instruction
- Calibrate gauges in accordance with OEM instructions
- Familiarity with ABYC standards and install equipment according to its guidelines
- Familiarity with fresh/raw water and sanitary systems
- Acts as a team leader on certain projects as needed
- Ability to install various drive systems such as water jets, inboard gas and diesel, stern drive, shaft drive and various outboards
- Ability to troubleshoot various systems
- Ability to conduct a fuel system or any other tank system test for integrity
- Ability to fabricate equipment panels/brackets as necessary
- Ability to install (including separation of systems) fresh/raw water and sanitary systems
- ABYC Standards certification a plus
- Relies on judgment and experience to plan and accomplish goals
- Other duties as assigned
- Uses established company procedures to work in a safe manner
- Reports to Shop Supervisor
New, Posted 1 day ago
TSA Security Inspector - No Experience Required
Airport Security Careers
Mobile, AL 36611
No Experience
Jobcase
A220 Flight Line Mechanic (Contract)
Airbus
Mobile, AL 36601
Flexible Schedule
Apply Directly
Crane Operator
Austal USA
Mobile, AL 36695
Onsite
- 3 years minimum work experience as an overhead crane operator in a shipyard environment or similar industry
- Experience as an operator of vertical lift and telescopic boom F/L's
- Must meet all the physical requirements specified by ASME B30.2
- Ability to follow specific instructions and work with limited supervision
- Must possess a thorough knowledge of equipment used in crane/rigging operations. To include, but not limited to, slings, shackles, clamps, chain hoists, load cells, etc.
- Demonstrated ability to interpret and utilize load charts
- Must have a thorough knowledge of USA Standard hand signals
- Must be able to utilize required personal protective equipment [PPE] as per OSHA standards
- Must be able to respond to verbal and audible sounds/commands
- Must be able to read and comprehend simple instructions, correspondence and memos
- Must be able to effectively present information in one-on-one or small group situations
- TOOLS: Will be expected to acquire basic tools on a list to be provided by the Crane/Rigging Manager
- Must be able to tour all vessels and work sites.
- Must have the ability to bend, squat, stoop, crawl, and kneel.
- Perform prolonged standing.
- Ability to turn head from side to side and about the vertical axis.
- Ability to turn body at the waist from side to side and about the vertical axis.
- Lift/push/pull 50lbs to 75lbs on an occasional basis.
- Lift/push/pull up to 20lbs on a frequent basis.
- Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps).
- Ability to work at heights above 12' while working from ladders, scaffolding and/or man lifts.
- Able to work at a variety of levels (ex. waist, eye, overhead).
- Demonstrate the ability to make use of required tools and equipment in a safely appropriate manner.
- Demonstrate good balance while working on uneven surfaces and maneuvering obstacles.
- Possess sufficient handgrip and coordination to carry and operate tools and equipment.
- Ability to utilize personal protective equipment (hardhat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards.
- Ability to withstand cold and hot temperatures.
- Ability to enter 18" x 36" openings and work in confined spaces for prolonged intervals of time.
- Able to respond to verbal and audible sounds/commands
- Able to utilize adequate visual skills.
- Ability to achieve full arm extension while reaching overhead, reaching out, reaching to the side, and reaching down.
- Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers.
- While performing the duties of this job, the employee should expect to encounter exposure to humid conditions, bright flashing lights, moving mechanical parts, high precarious places, outside weather conditions, and extreme heat.
- The employee should expect to encounter, on occasion, exposure to fumes and/or airborne particles at or below the PEL, toxic or caustic chemicals, and heat and cold.
- The noise level in the work environment is usually very loud, + 90 dB.
- Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks.
- 18 years of age or older at time of application
- Able to provide proof of US Person Status
- No felony convictions of Theft/Deception or Violent crimes within seven years from disposition date
- No felony convictions of Drug crimes within three years from disposition date
- Willing to submit to a drug screen
- Willing to submit to a background check
Easy Apply
Benefits Representative - 100% Remote, Set Your Schedule
Hire Standard Staffing
Mobile, AL
$120,000/yr
RemoteHealth Insurance
- Must be a U.S. or Canadian citizen
Apply Directly
Aviation Operations & Support
U.S. Navy
Mobile, AL 36695
Apply Directly
Mechanical Assembler I
Collins Aerospace
Foley, AL 36535
~ 58 min OnsiteFlexible ScheduleEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Typically requires HS diploma (or equivalent, e.g. G.E.D. in the US) or vocational/technical education in related discipline.
- Must be authorized to work in the U.S. without the company's immigration sponsorship now or in the future.
- The company will not offer immigration sponsorship for this position.
- Lift and carry up to 20 pounds.
- Able to work in a standing position up to a minimum of 8 hours per day.
New, Posted 7 hours ago
Automotive Technician | Up to $50/hr & Climate Controlled Shop | Daphne
Christian Brothers Automotive Careers
Mobile, AL 36695
$50/hr
New, Posted 1 day ago
Easy Apply
Retrofit Installer
Service Air
Silverhill, AL 36576
$100,000/yr
~ 44 min Onsite
- 5+ years of HVAC installation experience
- Valid driver's license
- Strong knowledge of HVAC systems, tools, and best practices
- Ability to lead a job from start to finish
- EPA Certification preferred (or ability to obtain)
Apply Directly
Part-Time Doorstep Trash Collection Specialist - Nights - Pickup Truck Preferred
VALET LIVING
Daphne, AL 36526
$20/hr
~ 32 min Onsite
- Your own personal open-bed pickup truck (or vehicle with trailer) - required for this role
- Valid driver's license and auto insurance
- At least 18 years old
- Authorized to work in the U.S. (proof required)
What companies are hiring Aircraft Engine jobs in Mobile,AL?
- Silver Ships
- Airport Security Careers
- Airbus
- Austal USA
- Hire Standard Staffing
- U.S. Navy
- Collins Aerospace
- Christian Brothers Automotive Careers
- Service Air
- VALET LIVING
- Silver Ships
- Airport Security Careers
- Airbus
- Austal USA
- Hire Standard Staffing
- U.S. Navy
- Collins Aerospace
- Christian Brothers Automotive Careers
- Service Air
- VALET LIVING
What is the hourly salary range for Aircraft Engine jobs in Mobile,AL?
The hourly salary range is $20 - $50.
The hourly salary range is $20 - $50.
