3413 Accumulation Tech jobs in California
Apply Directly
Composite Technician III
General Atomics
Adelanto, CA 92301
Onsite
- Typically requires High School diploma or equivalent and five or more years of related experience.
- Must be able to verbally communicate, read and comprehend written and verbal instructions, detailed blueprints and other similar authorized drawings and documents, and be capable of doing basic mathematical calculations.
- Must be able to use hand tools, such as rollers, paper cutters, scissors, x-acto knives, electric heat gun and fixtures such as molds and mandrels.
- Ability to use measuring instruments such as scales and protractors and calipers.
- Familiarity with common shop tools such as band saws, disk sanders, drill press, wood lathe, etc.
- May require respirator certification.
- Must be able to work in a loud environment; work extended hours as required.
- Able to lift assemblies weighing up to 50 lbs.
- Ability to obtain and maintain DoD security clearance is required.
Apply Directly
QC Technician
Element Solutions
Fremont, CA 94538
Onsite
- Minimum Qualifications: 0-3 years of industry experience in a related field.
- Basic computer skills: Microsoft Excel, Word, PowerPoint; ability to log process data
General Technican - Plasma Cobalt Machine
VPE Thermal LLC
Sacramento, CA 95815
$24-$28/hr
New, Posted 14 hours ago
ResumeLibrary
Cashier
Kroger
Downey, CA 90241
New, Posted 14 hours ago
ResumeLibrary
Cashier
Buffalo Wild Wings
Irvine, CA 92604
No Experience
Apply Directly
Assembler S3
Kratos Defense
San Jose, CA 95138
$28.85-$38.46/hr
OnsiteFlexible ScheduleEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- High school diploma or equivalent
- IPC-A-610 and/or J-STD-001 certification
- Typically requires a minimum of 2 - 4 years of related experience, preferably in electronics or PCB assembly
- Ability to stand and sit for long periods of time
- Ability to perform repetitive motion (rotating wrist, using hand tools)
Apply Directly
Manufacturing Technician
Teledyne
San Diego, CA 92154
Onsite
- Associate degree in a mechanical related field or equivalent work experience with air pollution instrumentation and/or other mechanical / electro-mechanical machinery
- 3-5 years of experience and/or education in a service-related environment, particularly oriented toward electronic, pneumatic, and electromechanical instrumentation
- Must have experience using the following test equipment: VOM, oscilloscopes, recorders, hand tools, test jibs and custom test equipment as required
- Must be able to exercises judgment within defined procedures and practices to determine appropriate action
- Must be able to communicate and articulate professionally and clearly both verbally and in writing
- Must possess problem solving skills, strong digital and analog skills, and the ability to troubleshoot in a logical manner with high attention to detail
- Requires general computer skills and knowledge of Word, Excel and Power Point programs
- Excellent interpersonal skills required for customer and team interaction
Easy Apply
Lead Service Technician
Coast Counties Truck & Equipment Company
Bakersfield, CA 93307
$45-$60/hr
Onsite
- Lead Service Technician
- The Lead Service Technician diagnoses and completes repairs on customer vehicles in a professional, timely manner while ensuring quality repairs at a fair cost to the customer.
- The Lead Service Technician diagnoses and creates repair strategies for other technicians to follow and complete.
- The Lead Service Technician will assist in mentoring and guiding other technicians in their repairs & stay up to date on all factory training.
- Pay Range: $45.00/Hour - $60.00/Hour
- The Lead Service Technician works directly with the Service Team – all personnel & Managers.
- The Lead Service Technician will communicate with the Service Team as the course of duties relate to the accomplishment of directives, objectives, and communication (internal & external) of the status of ongoing service events.
- The Service Technician will work closely with the Service Writer, Warranty Administrator, Parts counter personnel & Service management team when coordinating repair strategies and estimates in an effort to provide excellent customer service throughout the service events for all customers.
- Plan with the Service Management / Administrative Team and the Service Writer to establish repair strategies based on job priorities.
- Determine work required from the repair order.
- Observe and listen to the vehicle in operation to determine malfunction, to verify customer's complaint, and to plan repair strategy.
- Complete repairs efficiently within the time allowed.
- Perform QUALITY repairs minimizing shop comebacks and unnecessary shop expense.
- Submit a complete and accurate write-up for each repair performed.
- Road test vehicles to verify satisfactory repair (if you possess a CDL)
- Maintain computerized time posting on a current basis in KARMAK.
- Confirm all cores are returned to parts and that warranty parts are properly tagged and stored.
- Coordinate with the rear parts counter on parts needed for the repair.
- Maintain a clean shop environment. Throw out trash from your repair. Return tools to the cage. Roll up and store drop lights and extension cords.
- Maintain the readiness and proper working condition of the shop tools. Make adjustments and minor repairs as needed. Notify a member of the Service Team if a tool is not quickly repairable.
- Assist the Service Team, including the Service Writer with preparing accurate repair estimates when required.
- Update the Service Team on current repairs in process on a regular basis.
- Participate in training in an effort to increase skills.
- Maintain current certifications.
- Work in a safe manner. Do not put yourself, a customer, a fellow employee, or a vehicle in harm's way.
- Provide and maintain a full set of hand tools and air tools.
- Leave the customer's vehicle in the same or cleaner condition than when repair began. Use seat covers, steering wheel covers and floor mats.
- Be punctual at the start of your shift and when returning from lunch and breaks.
- Do not exceed two hours on check and advise conditions without approval from the Service Management / Administrative Team & the customer.
- Bring any additional repairs found to be needed to the attention of the service team prior to staring repairs in order to get customer approval.
- Always wear your safety PPE when on the shop floor as required.
- Practice safe work habits at all times.
- Understand and follow federal, state, and local regulations regarding disposal of hazardous waste, OSHA, MSDA, right-to-know, etc.
- Conduct oneself in a professional manner reflecting the importance of the customer in our business. Without the customer, we are out of business.
Apply Directly
Manufacturing Technician 1
Integrated Polymer Solutions
San Diego, CA 92121
OnsiteHealth InsuranceRetirement Benefit
- Education: High School diploma or general education degree (GED) or equivalent combination of education and experience
- Years' Experience: Three to six months' related experience and/or training
- Must be able to read job specifications and procedures to determine machine adjustments and material requirements
- Must be able to maintain accurate process logs of all activities
- Must be familiar with basic machine functions in order to perform the tasks stated above
- Must be able to accurately work with scales
- Must have ability to safely work with cutting knifes and steel rule dies
- Pushes button or depresses pedal to activate machine
- Observes machine operation to detect workpiece defects or machine malfunction
- Measures workpiece dimensions to determine accuracy of machine operation
- Performs minor machine maintenance such as oiling machines, dies, or workpieces
- Sets up and breakdown of processes on equipment
- Operates any equipment needed to perform job
- Detects and reports defective material or questionable conditions to the department supervisor
- Maintain the work area in a clean and orderly condition
- Follows all safety guidelines and rules
- Must be able to work overtime to meet production schedule
- This position requires access to information subject to the International Traffic in Arms Regulations (ITAR). Employment is contingent upon the applicant being a "U.S. person" as defined by ITAR (22 CFR §120.15), which includes U.S. citizens, lawful permanent residents, refugees, or asylees, as required by U.S. export control laws.
Apply Directly
Machining Tech III, Multi Spindle (Davenport)
Howmet Aerospace
Carson, CA 90745
OnsiteUrgently HiringFlexible ScheduleHealth InsurancePaid Time OffRetirement Benefit
- High school diploma or GED
- 3-years experience operating machinery
- Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position
- ITAR requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee
What companies are hiring Accumulation Tech jobs in California?
- General Atomics
- Element Solutions
- VPE Thermal LLC
- Kroger
- Buffalo Wild Wings
- Kratos Defense
- Teledyne
- Coast Counties Truck & Equipment Company
- Integrated Polymer Solutions
- Howmet Aerospace
- General Atomics
- Element Solutions
- VPE Thermal LLC
- Kroger
- Buffalo Wild Wings
- Kratos Defense
- Teledyne
- Coast Counties Truck & Equipment Company
- Integrated Polymer Solutions
- Howmet Aerospace
What is the hourly salary range for Accumulation Tech jobs in California?
The hourly salary range is $24 - $60.
The hourly salary range is $24 - $60.
