1027 Abruzzo jobs in Osseo,MN
Apply Directly
Foreman - Sheet Metal (ACM Panels & Large-Scale Standing Seam) 35 to 50 hour DOE
Horizon Roofing
Brooklyn Park, MN 55443
OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Foreman - Sheet Metal (ACM Panels & Large-Scale Standing Seam)
- Experienced Foreman with a strong background in ACM Panel systems, large-scale standing seam installs, and job management experience
- Has proven experience installing ACM Panels
- Has managed and executed large-scale standing seam installs
- Has demonstrated job management experience
- Can lead crews while maintaining productivity, quality, and safety standards
- Understands commercial sheet metal systems inside and out
- Ability to climb ladders and lift 50+ lbs
- Comfortable working at heights
- Able to work outdoors in varying climates
- No fear of heights
- Must provide your own transportation to job sites and/or shop
- Physical examination
- Drug screening
- Background check
- OSHA and safety guidelines
Easy Apply
FABRICATOR
Anderson Dahlen
Anoka, MN 55303
$25-$30/hr
~ 19 min OnsiteHealth Insurance
- Fabricator
- Set up and operate Cincinnati press brakes
- Rolls
- Shears
- Band saws
- Drills
- Forklifts
- Overhead cranes
- Read and work from drawings, sketches, routing notes, and instructions to determine operational requirements and develop forming details for sheet metal components
- Measure and inspect parts using tools such as tape measures, calipers, squares, and protractors to ensure conformance to specifications and prescribed tolerances
- Use shop math, arithmetic calculations, and layout formulas to support fabrication and forming operations
- Perform work on parts ranging from small standard components to large or complex fabrications requiring close tolerances and careful coordination
- Detect defective materials, unusual conditions, or operating difficulties and communicate them promptly to supervisors or trainers
- Maintain a positive team-oriented attitude, comply with company and departmental policies, and support on-time, high-quality job completion
- Moderately heavy work requires the occasional lifting of objects weighing 50 pounds or less
- Lift/Carry-0-10 lbs. continuously, 11-50 lbs. frequently, 51-100 lbs. never
- Push/Pull-0-25 lbs. continuously, 26-100 lbs. frequently
- Bend- 34-66% during a 10/12-hour shift
- Twist/Turn- 34-66% during a 10/12-hour shift
- Kneel/Squat- 0-33% during a 10/12-hour shift
- Sit- 0-33% during a 10/12-hour shift
- Stand/Walk- 67-100% during a 10/12-hour shift
- Overhead Reaching- 0-33% during a 10/12-hour shift
- Ladder/Stair- 0-33% during a 10/12-hour shift
- 4/10 hour days shift Monday-Thursday (Day shift)
- 4/10 hour days shift Monday-Thursday with 15% night shift differential (Night shift)
- 3/12 hour days shift Friday-Sunday with 15% shift differential (Weekend shift)
- 24-38 Hourly Wage
Apply Directly
Fabrication Operator - 1st Shift
nVent
Anoka, MN 55303
$14.80-$27.50/hr
~ 19 min OnsiteUrgently HiringEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Min. 1 year manufacturing fabrication experience
- Knowledge in manufacturing practices
- Knowledge in metal fabrication
- Various welding equipment
- Resistance spot welders, Tig spot guns, stud welding equipment
- Press brake, NC controller
- Material handling equipment: pallet jack, lift tables, wheeled carts, etc.
- Safety equipment: safety glasses, hearing protection, protective clothing, etc.
New, Posted 1 day ago
Apply Directly
Warehouse Worker - Immediate Opening
Performance Foodservice
Rogers, MN 55374
$31/hr
~ 13 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Must be able to work the scheduled / assigned times and required overtime for the position
- Able to stand, walk, reach, and lift repeatedly throughout shift
- Able to lift, stack, and/or pull products off shelves, as well as replenish product, from various heights weighing between 10-35 pounds and generally up to between approximately 60 and 90 pounds, depending on the location, throughout shift
- Able to work in multi-temperature environments, i.e., cooler, freezer and dry
- Pass post offer drug test and criminal background check
- Ability to become EPJ certified within the new-hire training period
- Ability to complete required training independently
Apply Directly
Facility General Laborer
Sherwin-Williams
Brooklyn Park, MN 55443
$20.09-$26.06/hr
OnsiteUrgently Hiring
- Must be at least eighteen (18) years of age
- Must be legally authorized to work in the country of employment without needing sponsorship for employment work visa status now or in the future
- Must be able to read, write, comprehend and communicate in English
- Must be able, with or without reasonable accommodation, to retrieve material from shelves and floor stacks and lift and carry up to 50 lbs. frequently and up to 100 lbs. on occasion
Easy Apply
Manufacturing/ Sandblasting - Will Train
AVTEC FINISHING
Minneapolis, MN 55428
$22/hr
$1,500 bonus
~ 20 min OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Authorized to work in the United States
- Reading work orders and following detailed instructions
- Inspecting completed parts for quality and accuracy
- Completing production documentation
- Logging completed work into company systems
- Performing basic equipment checks and maintenance
- Strong attention to detail
- Ability to follow written instructions
- Reliable attendance and punctuality
- Basic math and measurement skills
- Ability to read a ruler/tape measure and analog clock
- Good hand-eye coordination
- Ability to read and understand technical drawings and blueprints
- Ability to lift and move materials as needed
- Ability to work cooperatively with supervisors and coworkers
- Security: This position operates within a secure manufacturing facility
- All employees must adhere to strict security policies including restrictions on personal electronic devices, access control, and documentation procedures
- The Lindgren Group must comply with ITAR (International Traffic in Arms Regulations). These regulations may restrict persons of non-US citizen status from working/participating/observing/or other forms of gathering knowledge about certain activities within the company.
Apply Directly
Tool and Cutter Grinder C
Graco
Rogers, MN 55374
~ 13 min OnsiteEducation AssistanceHealth InsuranceRetirement Benefit
- High school graduate or equivalent
- One year machining experience
- Applicants must be legally authorized to work in the United States
- This role is not eligible for immigration sponsorship now or in the future (e.g., H-1B, TN, F-1 OPT)
Apply Directly
Welder / Metal Fabricator
Tom Kraemer
Minneapolis, MN 55407
~ 20 min OnsiteUrgently HiringHealth InsurancePaid Time OffRetirement Benefit
- Ability to work at multiple heights
- Able to work and weld in tight spaces
- Attention to detail
- Ability to prioritize and to multi-task in a fast-paced environment
- Read, comprehend and complete basic checklists, forms and other related documents
- Ability to operate equipment or willingness to learn
- Must be able to think on your feet and troubleshoot problems as they arise
Apply Directly
Tool & Die Maker - 1st Shift
Resideo
Minneapolis, MN 55422
$44.22/hr
$5,000 bonus
~ 20 min OnsiteUrgently HiringHealth InsurancePaid Time OffRetirement Benefit
- 4+ years of experience in the construction, alteration, and repair of complicated tools, dies, gages, molds, and special equipment.
- Professional experience operating equipment such as, Wire and Sinker Electrical Discharge Machines (EDM), Computer Numeric Control (CNC) machines, and/or lathes
Apply Directly
Tool and Die Maker - Machinist 1st shift (Stamping)
Wilson Tool International
Saint Paul, MN 55110
$41.83-$43.77/hr
~ 30 min OnsiteUrgently Hiring
- 3+ years of experience in tool & die or high-precision machining
- 3+ years of hands-on experience in stamping die build or die design
- Proven ability to independently complete complex setups
- G/M code programming
- GD&T; and blueprint interpretation
- Machinist math (algebra, geometry, trigonometry)
- Strong understanding of tool steels, material properties, and machining strategies
New, Posted 1 day ago
Easy Apply
Mechanical Assembler I
Circuit Check
Maple Grove, MN 55311
~ 10 min OnsiteHealth InsurancePaid Time OffRetirement Benefit
- High School Diploma or GED required
- A minimum of 2 years of directly related training and/or mechanical assembly related work experience is required
- Must be able to read and interpret electronic blueprints or part drawings
- Must be legally authorized to work in the United States without needing sponsorship for an employment visa
- Applicants must be able to stand for extended lengths of time
- Ability to lift and carry up to 50 lbs
- Ability to bend, reach, stoop and twist as required
- Must be able to work in a manufacturing environment with exposure to dirt, dust, noise, machine chemicals, fumes
- Must be able to work additional hours during periods of peak demand
- Must be able to use Microsoft Excel, Outlook and Word
- Must maintain confidentiality and security of intellectual property (CUI-ITAR, Prototype)
What companies are hiring Abruzzo jobs in Osseo,MN?
- Horizon Roofing
- Anderson Dahlen
- nVent
- Performance Foodservice
- Sherwin-Williams
- AVTEC FINISHING
- Graco
- Tom Kraemer
- Resideo
- Wilson Tool International
- Circuit Check
- Horizon Roofing
- Anderson Dahlen
- nVent
- Performance Foodservice
- Sherwin-Williams
- AVTEC FINISHING
- Graco
- Tom Kraemer
- Resideo
- Wilson Tool International
- Circuit Check
What is the hourly salary range for Abruzzo jobs in Osseo,MN?
The hourly salary range is $14.8 - $44.22.
The hourly salary range is $14.8 - $44.22.
