714 Y Axis jobs in Virginia

Apply Directly

Tool Maker/ CNC Machinist

L3 Harris

Ashburn, VA 20147

OnsiteBilingual PreferredPaid Time OffRetirement Benefit

The Tool Maker will be responsible for the programming, setup and operation of CNC machine tools to produce prototype and production parts in a rapid-paced environment.
A broad range of experience with manual and CNC machine tools, shop operations, tooling, materials and inspection is desired.
Familiarity with MAZAK Variaxis 1600's machine
Proficient in the independent setup and operation of 3-axis or similar commercial grade CNC milling machines to include fixturing (vise and sub-plate) and tooling
Proficient in the ability to read and interpret drawings with a thorough understanding of Geometric Dimensioning and Tolerancing per ANSI Y 14.5
Proficient in the use of basic inspection equipment to check machined parts per ANSI Y 14.5
Experience with machining a broad range of materials including aluminum, superalloys, engineering plastics and composites
Proficient in the use of manual machine tools (mill, lathe, drill press, band saw) to support CNC machine setup and operation
Maintain a clean and organized work area and follow established safety protocols and standard operating procedures
Collaborate with engineering, quality, and production teams to resolve technical issues and improve machining processes
Document job setups and recommend process improvements to reduce setup time and increase repeatability
Safely complete all physical activities required in a manufacturing environment including, but not limited to: Lifting, pushing, pulling and/or carrying 25-50 pounds on a regular basis Walking, bending, sitting, standing, climbing, and reaching for prolonged periods of time on a regular basis Ability to seize, grasp, turn, hold, and operate manufacturing tools and equipment Willingness and ability to work in a manufacturing environment with regular exposure to moving mechanical parts, dust, fumes, chemicals, and loud noises
Requires a High School Diploma or equivalent and a minimum of 4 years of prior relevant experience or 2 years post-Secondary/Associates Degree with 0 to 2 years of prior related experience.

SmartExplore AI is experimental.

New, Posted 1 day ago

Apply Directly

CNC Machinist (Okuma Mills) - 2nd Shift

ADVEX CORPORATION

Hampton, VA 23666

OnsiteHealth InsurancePaid Time OffRetirement Benefit

Basic CNC machining knowledge, vocational training, apprenticeship experience, or equivalent manufacturing experience.
Ability to read and follow work instructions and manufacturing procedures.
Ability to perform basic shop math and measurement functions.
Strong attention to detail and commitment to producing quality work.
Ability to work independently and as part of a team.
Willingness to learn new equipment, processes, and machining techniques.
Must be at least 18 years of age.
Must be a United States citizen due to federal contract requirements.
Must successfully complete a background investigation and pre-employment drug screening.
No felony convictions involving theft, deception, or violent crimes within the past seven years.
No felony drug convictions within the past three years.
Physical: Ability to lift up to 50 pounds independently and up to 100 pounds with assistance.
Physical: Ability to stand, walk, bend, reach, and perform repetitive motions throughout the workday.
Physical: Ability to safely operate within a manufacturing environment that includes noise, moving equipment, and varying temperatures.
Physical: Frequent handling of tooling, materials, components, and machined parts.

SmartExplore AI is experimental.

Apply Directly

CNC Machinist 1/Class - (21)

Fairlead

Portsmouth, VA 23703

Onsite

Minimum 3 years of experience operating CNC manufacturing equipment in an industrial environment.
Experience operating CNC plasma cutting systems, robotic processing cells, beam lines, laser tables, or other automated manufacturing equipment.
Experience working in structural steel fabrication, shipbuilding, heavy manufacturing, or industrial production environments.
Familiarity with CNC programming concepts, G-code, robotic motion systems, or nesting software.
Experience reading fabrication drawings and understanding geometric tolerances.
Forklift and overhead crane operating experience.
Basic understanding of preventive maintenance practices.
Knowledge of Lean Manufacturing and continuous improvement concepts
High school diploma or GED required.
Ability to read and interpret engineering drawings and manufacturing documentation.
Working knowledge of measurement tools including tape measures, calipers, squares, and gauges.
Ability to perform basic mathematical calculations and dimensional verification.
Basic computer proficiency for machine interfaces and production reporting.
Demonstrated commitment to safety and quality.
Ability to work independently while maintaining production objectives.

SmartExplore AI is experimental.

Apply Directly

CNC Machine Operator - 2nd Shift

Columbus McKinnon Corporation

Damascus, VA 24236

Onsite

High school diploma or general education degree (GED); and 1+ years related experience and/or training; or equivalent combination of education and experience.
Ability to lift/lower/push/pull up to 40 lbs.

SmartExplore AI is experimental.

Apply Directly

Welder- Class B

Trident Maritime Systems

Newport News, VA 23607

Onsite

Welder- Class B
Production Welder (Shop) - Class B
Minimum 5 years of welding experience
Minimum 2 years of shop-based welding experience (fabrication shop preferred)
Minimum of two (2) welding certifications required, including FCAW (Flux Core) and GMAW (MIG)
Experience with FCAW (Flux Core) and GMAW (MIG) welding processes required
Ability to produce consistent weld quality with limited supervision
Experience performing multi-pass welds with proper technique and bead control
Ability to perform grinding and finishing work to meet quality expectations
Must be able to pass company-required welding tests (MIL-SPEC / NAVSEA standards as applicable)
Strong work ethic and ability to perform in a production-focused environment
Ability to follow instructions and work effectively within a team
Work is performed in a controlled shop environment (not field or shipboard work)
Welding is primarily performed at tables and fixtures (table-top welding) in seated or standing positions
Regularly required to stand, walk, bend, kneel, and perform repetitive tasks
Ability to perform repetitive welding tasks in consistent and varying work positions throughout the shift
Ability to lift to 50 lbs. as required
Must be able to safely operate welding equipment, grinders, and related tools
Exposure to typical shop conditions including noise, heat, and welding fumes
Must comply with all company safety, quality, and operational procedures
Must be able to work overtime as required to meet production demands
Must consistently demonstrate high levels of reliability, productivity, and craftsmanship in a production environment
Must be willing to support team development, assist less experienced welders, and promote quality and efficiency standards within the shop
Must be able to pass a drug screening and background check
Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks.
Must have the ability to bend, squat, stoop, crawl, and kneel.
Perform prolonged standing.
Lift/push/pull 50lbs to 75lbs on an occasional basis.
Lift/push/pull up to 20lbs on a frequent basis.
Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding.)
Able to work at a variety of levels (ex. waist, eye, overhead).
Demonstrate the ability to safely and appropriately use required tools and equipment.
Must be able to turn head from side to side and about the vertical axis.

SmartExplore AI is experimental.

Apply Directly

CNC Machinist II

Fairlead Integrated

Portsmouth, VA 23703

Onsite

1-3 years' experience as a machinist
High school diploma or equivalent
Completion of formal apprenticeship program or completion of in-company, four-year training program
Read and interpret blueprints, technical drawings, and shop sketches
Set up and operate CNC machines to perform tasks such as drilling, grinding, milling etc.
Use all conventional machine shop equipment and machinery to cut, machine and shape raw materials in accordance with drawing requirements
Build fixtures and various holding devices as needed to hold or support work pieces in process
Inspect high precision parts using blueprints and adhering to GD&T; tolerances
Supervise multiple machines while they execute the tasks and make any necessary adjustments to tool offsets and G&M; code to keep part in tolerance
Use correct feeds and speeds to ensure quality dimensions as well part finishes with different types of materials
Determine tools needed to perform given task and set-up those tools accordingly
Check run out of tools to ensure part will cut on size
Understand tool wear and how to compensate as well as understanding how to prevent tool wear
Set tool offsets and diameter compensation
Set multiple 3-axis work offsets within (1) program
Perform machine set-ups with little to no set up instructions
Edit G&M; code on the controller as well as on PC with .TXT documents
Operate forklift as needed
Assemble machined or fabricated components as needed
High mental and visual effort required
Possess proficiency in measuring instruments including Tape measure, calipers, OD micrometer, depth micrometer, bore gauges, surface gauge, height gauge, gauge pins, gauge blocks, pitch micrometer, ID micrometer, blade micrometer, thickness gauges, radius gauges
Proficient in proofreading G&M; code to ensure no crashes or mistakes occur as well as performing a test run to ensure program outputs are accurate
Thorough understanding of measuring instruments, on-the-job use

SmartExplore AI is experimental.

New, Posted 3 hours ago

Popeyes Team Member

Popeyes Louisiana Kitchen

Glen Allen, VA 23060

Flexible Schedule

On-Demand: Guest Advocate (Cashier), General Merchandise, Fulfillment, Food and Beverage, Style (T20

Target Stores

Dumfries, VA 22025

Flexible Schedule

Apply Directly

CNC Programmer

Kennametal

New Market, VA 22844

Onsite

Minimum 3-5 years of experience programming CNC milling and/or turning machines in a manufacturing environment.
High school diploma or equivalent; technical certification or associate degree in machining, manufacturing, or engineering preferred.
Strong knowledge of G-code, CNC controls (e.g., Fanuc, Siemens, Haas, Mazak), and machining best practices.
Experience using CAM software (e.g., Mastercam, NX, or equivalent).
Ability to interpret complex engineering drawings, GD&T;, and specifications.
Solid understanding of cutting tools, fixturing, and machining of precision components.
Experience machining hard or advanced materials common to tooling and industrial applications.
Setup and operation of a variety of conventional and CNC machine tool(s) working on part features using prescribed tooling, gauging, and methods
Familiarity with Kennametal cutting tools or similar industrial tooling products.
Knowledge of lean manufacturing and continuous improvement methodologies.
Experience with multi-axis machining and automation is a plus.
Understanding of basic math, blueprint reading and gauge-reading.
Ability to understand written and oral instructions and communicate with supervisors and coworkers.
Advanced knowledge and understanding of computer applications and software.
Ability to work in a manufacturing environment with exposure to machinery, noise, and metalworking fluids.
Capability to stand for extended periods and lift up to specified manufacturing limits.