293 Aircraft Structure Assembler Engineering jobs in Semmes,AL

Apply Directly

A Class Structural Welder

Austal USA

Mobile, AL 36695

~ 26 min OnsiteUrgently Hiring

A Class Welder
Minimum of 1 year as a B-Class Welder at Austal producing advance fillet welds or 2 years of GMAW MIG welding experience at a comparable employer
Ability to pass A Class skills evaluation test to demonstrate welding ability for full penetration joint details
Ability to successfully complete onboarding procedures in preparation to pass AL CV weld qualification test requirements to meet contract requirements for A Class welding on the vessel
Demonstrated ability to weld fillets for material thicknesses 4mm- 25mm
Demonstrated ability to weld gusset toe and wraps with minimal blending required.
Demonstrated ability to weld frame wraps and terminations with minimal blending required.
Demonstrated ability to weld T-Bar wraps and terminations with minimal blending required.
Demonstrated ability to weld into corners / vertical intersections with minimal blending required
Demonstrated ability to evaluate and correct basic weld pick up, with minimal supervision
Demonstrated ability to terminate stich welds with minimal weld correction to address minor cosmetic or weld defects
Demonstrated ability to weld continuously for 400mm
Demonstrated ability to back step and sequence weld based upon provided information and/or good welding practices
Demonstrated ability to weld multi-pass fillets with only cosmetic correction required
Ability to take direction and follow instructions
Good mechanical aptitude with ability to produce consistent quality
Ability to inspect and correct basic weld pick-up without supervision
Good listening and verbal communication skills
Ability to work independently and as part of a team
Problem-solving and trouble-shooting skills
Excellent hand-eye coordination; good spatial orientation
Ability to consistently meet production deadlines
Ability to read and interpret and work from construction drawings, job specifications, instruction manuals, manufacturer's handbooks, change orders and contract specifications to obtain weld sizing information and material edge preparation requirements
Ability and willingness to work with and to teach less-skilled workers
Ability to maintain and perform routine preventive maintenance on welding equipment
Ability to wear required PPE
Must be able to tour all vessels and work sites
Must have the ability to bend, squat, stoop, crawl, and kneel. Perform prolonged standing
Lift/push/pull 50lbs to 75lbs on an occasional basis
Lift/push/pull up to 20lbs on a frequent basis
Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps)
Ability to work at heights above 12'
Able to work at a variety of levels (ex. waist, eye, overhead)
Demonstrate the ability to safely and appropriately use required tools and equipment
Demonstrate good balance while working on uneven surfaces and maneuvering obstacles
Possess sufficient handgrip and coordination to carry and operate tools and equipment
Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards
Ability to withstand cold and hot temperatures
Ability to enter 18" x 36" openings and work in confined spaces for prolonged periods of time
Able to respond to verbal and audible sounds/commands
Able to utilize adequate visual skills
Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down
Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers

SmartExplore AI is experimental.

Apply Directly

Focus Factory Construction Support Engineer

General Dynamics Electric Boat

Mobile, AL 36695

~ 26 min OnsiteUrgently Hiring

Bachelor of Science degree in Civil, Mechanical, Electrical or Aerospace Engineering is required.
1-5 years of post-graduate engineering experience.
Ability to obtain a DOD Secret security clearance is required.
Construction engineering experience

SmartExplore AI is experimental.

Apply Directly

B Class Structural Fitter

Austal USA

Mobile, AL 36695

~ 26 min Onsite

Minimum 6 months' experience as a Trade Assistant at Austal or 1 year related experience in similar industry required
Pass approved B Class Fitter test for Aluminum and/or Steel
Must demonstrate an acceptable proficiency and competency to Austal Supervision for a B-Class Fitter position
Must be willing to work with and train lower-skilled workers.
Must demonstrate ability to interpret job specifications and perform work on marine vessels
Knowledge of equipment, work processes and techniques used in measuring, and fitting of aluminum and/or steel components, modules and vessels.
Ability to add, subtract, multiply, divide, and measure using the metric system.
Knowledge of shipyard terminology such as general ship structure and vessel layout
Ability to work any shift or overtime as required by management, schedule must be flexible.
Obtain GMAW ABS 'B' Class Weld Certification for aluminum applications and/or FCAW 'B' Class Weld Certification for steel applications.
Candidates must have HS Diploma/GED or comparable trade experience.
Comparable trade experience is defined as five (5) or more years of experience working in the applicable trade, two (2) years of experience in shipbuilding, or education in the trade comparable to apprenticeship.
18 years of age or older at time of application
Able to provide proof of US Person Status
No felony convictions of Theft/Deception or Violent crimes within seven years from disposition date
No felony convictions of Drug crimes within three years from disposition date
Willing to submit to a drug screen
Willing to submit to a background check
Must be able to tour all vessels and work sites.
Must have the ability to bend, squat, stoop, crawl, and kneel.
Perform prolonged standing.
Lift/push/pull 50lbs to 75lbs on an occasional basis.
Lift/push/pull up to 20lbs on a frequent basis.
Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps).
Ability to work at heights above 12' while working from ladders, scaffolding and/or man lifts.
Able to work at a variety of levels (ex. waist, eye, overhead).
Demonstrate the ability to safely and appropriately use required tools and equipment.
Demonstrate good balance while working on uneven surfaces and maneuvering obstacles.
Possess sufficient handgrip and coordination to carry and operate tools and equipment.
Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards.
Ability to withstand cold and hot temperatures.
Ability to enter 18" x 36" openings and work in confined spaces for prolonged periods of time.
Able to respond to verbal and audible sounds/commands.
Able to utilize adequate visual skills.
Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down.
Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers.

SmartExplore AI is experimental.

Apply Directly

Structural Designer Senior

Birdon

Bayou La Batre, AL 36509

~ 43 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

Associate of Applied Science or equivalent.
Minimum 15 years structural design experience.
10 years ShipConstructor software experience, or 5 years ShipConstructor experience and 5 years with equivalent software.
10 years of AutoCAD software.
Demonstrated proficiency in developing 3D structural models and production drawings.
Familiarity with structural manufacturing CAM software and files, such as structural nest files, NC Pyros, and automated welding.
Familiarity with shipyard modular construction methods and processes.
Strong knowledge of structural detail and welding standards.
Experience with structure, Piping HVAC, electrical, or outfitting design.
Knowledge of ABS, US Navy and USCG design requirements.

SmartExplore AI is experimental.

Apply Directly

Aviation Operations & Support

U.S. Navy

Creola, AL 36525

Apply Directly

Welder/Fitter Week Shift

Silver Ships

Theodore, AL 36582

~ 38 min OnsiteUrgently HiringHealth InsurancePaid Time Off

Has nominal aluminum welding experience or passed the AIDT welding course.
Can perform simple welding task that has little to no quality requirements.
Has the aptitude and desire to learn the welding process directed by Silver Ships Inc.
Every skill set from Welder Level 3
Has the ability to weld to a certain standard instructed by his/her supervisor based on the projects welding requirements.
Has minimum weld deficiencies that require rework.
Has the ability to repair any weld deficiencies in a timely matter.
Complies to the companies welding, safety, and quality standards.
Proficient in Pulse aluminum GMAW and or GTAW
Can weld in accordance with given weld schedule depicted on blueprints with little to no supervision required.
Can pass the certified welder test based on ABS and CWI standards from FMS.
Must be able to perform basic maintenance and repairs on the welding machines required to perform his/her job.
Must be able to lift up to 50lbs.
Must be able to stand, bend, stoop, squat or kneel regularly, as well as climb stairs and ladders to complete tasks.
Must be able to change your own shielding gas bottle required for welding.
Has the ability to work from a blueprint on simple fabricating tasks with constant intermediate supervision from either a foreman or senior fabricator.
Has less than one year of experience in the aluminum fabricating field.
Has the ability to work from a blueprint on most standard fabricating tasks with occasional supervision from either a foreman or senior fabricator.
Has more than a year of experience in the aluminum fabricating field.
Has the ability to work from a blueprint on all fabricating task, including complicated hull designs and components without any supervision from a foreman or senior fabricator.
Can be called upon to supervise or advise lesser skilled employees working on similar projects.
Can perform tasks or projects in the projected or estimated time based on the production schedule.
Quality is without question.
Must be able to change your own shielding gas bottle required for stitch welding.

SmartExplore AI is experimental.

Apply Directly

Aviation Operations & Support

U.S. Navy

Mobile, AL 36695

Apply Directly

Planner III

Birdon

Bayou La Batre, AL 36509

~ 43 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

High School Diploma or GED Certificate with appropriate experience
6+ years' experience in production planning in a shipbuilding manufacturing environment
DOD or DHS planning experience within a ship manufacturing environment

SmartExplore AI is experimental.

New, Posted 5 hours ago

Apply Directly

Maintenance Planner/ Scheduler... Job (Axis (Mobile), AL, US)

Arkema Inc.

Axis, AL 36505

~ 30 min OnsiteUrgently Hiring

Minimum 2 years of experience in a similar role within a manufacturing environment or chemical plant
Familiarity with a maintenance environment with a focus on material and purchasing. scheduling changes etc.
Prior experience with MS Office
Bachelor's degree in Mechanical Engineering preferred. High School Diploma required and/or a certification in maintenance in lieu of a degree
Certified Maintenance & Reliability Professional (CMRP) certification preferred
Ability to wear personnel protective equipment such as respirators
Knowledge of production processes and equipment; mechanical background preferred
Knowledge of maintenance processes; work order system, planning/scheduling and storeroom
Strong communication and organization skills
Proficient in MS Office and CMMS
Initiative and self-starter
Strong written and verbal communication skills
Ability to effectively communicate with all levels of plant, technical and management personnel
Basic computer skills (email, MS Office)
Experience with SAP and Primavera preferred
Supports the site HES policy and complies with all regulatory and internal requirements
Participates in HES activities provided by site management and Arkema Inc.
Supports and promotes the reporting of all health, safety, environmental, near-miss, accident or injury incidents
On occasion must lift up to 50 pounds and climb ladders
Must be capable of entering confined spaces
Occasionally expected to use tools such as valve wrenches
Position is based in manufacturing facility with all inherent risks
Expected to be present in the field
Will be expected to flex schedule at times to spend ample time with all shifts

SmartExplore AI is experimental.

Recommended

Easy Apply

Heavy Equipment Operator

Express Employment

Mobile, AL 36608

~ 26 min Onsite

High school diploma or equivalent
Proven experience operating heavy machinery, preferably in underground utility work
Valid driver's license and a clean driving record
Read and interpret blueprints and technical drawings
Physical stamina and the ability to work in various weather conditions
Conduct daily inspections of the work area to identify potential hazards and maintain compliance with all safety protocols, including proper use of PPE

SmartExplore AI is experimental.