522 Advanced Rigger jobs in Mobile,AL

Recommended

Apply Directly

A Class Pipe Fitter

Austal USA

Mobile, AL 36695

$33.36/hr

OnsiteUrgently Hiring

A Class Pipe Fitter
1 year minimum work experience as a B-class pipe fitter at Austal or 2 years experience in a similar role at comparative employer.
The individual must possess experience in the trade, knowledge of ship terminology, ability to interpret engineering drawings.
The individual must demonstrate ability to interpret job specifications and perform work on marine vessels.
Must be able to follow directions and work with limited supervision.
Must be willing to develop other team members skill levels.
Must have full set of personal tools.
Prepared to Step up as supervisor when required
Follow Austal guidelines and procedures
Do not leave job early or return late from break times
Ensure work area is left clean, all equipment and tools are stowed away safely and protected against damage
Must be able to tour all vessels and work sites.
Must have the ability to bend, squat, stoop, crawl, and kneel.
Perform prolonged standing.
Lift/push/pull 50lbs on an occasional basis.
Lift/push/pull up to 20lbs on a frequent basis.
Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps).
Ability to work at heights above 12' while working from ladders, scaffolding and/or man lifts.
Able to work at a variety of levels (ex. waist, eye, overhead).
Demonstrate the ability to safely and appropriately use required tools and equipment.
Demonstrate good balance while working on uneven surfaces and maneuvering obstacles.
Possess sufficient handgrip and coordination to carry and operate tools and equipment.
Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards.
Ability to withstand cold and hot temperatures.
Ability to enter 18" x 36" openings and work in confined spaces for prolonged periods of time within OSHA guidelines.
Able to respond to verbal and audible sounds/commands.
Able to utilize adequate visual skills.
Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down.
Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers.
Ability to read and comprehend simple instructions, short correspondence, and memos.
Ability to write simple correspondence.
Ability to add, subtract, multiply, divide, and measure using the metric system.
Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form.
Ability to deal with problems that may arise in certain situations.
Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks.
PPE available and MUST be used correctly.
Pass the \"A\" Class pipe fitters tests; written with a minimum score of 70% and practical with a minimum score of 90%.

SmartExplore AI is experimental.

Apply Directly

Mechanical Assembler 1

RTX

Foley, AL 36535

~ 58 min OnsiteUrgently HiringFlexible ScheduleEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

HS Diploma or GED
Minimum Of 1 Year Experience In Mechanical Assembly Or Related Field
Ability To Interpret And Understand Technical Drawings And Instructions
Knowledge Of Basic Hand And Power Tools, Including Torque Wrenches And Pneumatic Tools
Strong Attention To Detail And Ability To Work Efficiently In A Fast-Paced Production Environment
U.S. Person (as defined by the provided U.S. Person clarification)
Onsite position (Position Role Type: Onsite)

SmartExplore AI is experimental.

Recommended

Apply Directly

Crane Operator

Austal USA

Mobile, AL 36695

OnsiteUrgently Hiring

3 years minimum work experience as an overhead crane operator in a shipyard environment or similar industry
Experience as an operator of vertical lift and telescopic boom F/L's
Must meet all the physical requirements specified by ASME B30.2
Ability to follow specific instructions and work with limited supervision
Must possess a thorough knowledge of equipment used in crane/rigging operations. To include, but not limited to, slings, shackles, clamps, chain hoists, load cells, etc.
Demonstrated ability to interpret and utilize load charts
Must have a thorough knowledge of USA Standard hand signals
Must be able to utilize required personal protective equipment [PPE] as per OSHA standards
Must be able to respond to verbal and audible sounds/commands
Must be able to read and comprehend simple instructions, correspondence and memos
Must be able to effectively present information in one-on-one or small group situations
TOOLS: Will be expected to acquire basic tools on a list to be provided by the Crane/Rigging Manager
Must be able to tour all vessels and work sites.
Must have the ability to bend, squat, stoop, crawl, and kneel.
Perform prolonged standing.
Ability to turn head from side to side and about the vertical axis.
Ability to turn body at the waist from side to side and about the vertical axis.
Lift/push/pull 50lbs to 75lbs on an occasional basis.
Lift/push/pull up to 20lbs on a frequent basis.
Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps).
Ability to work at heights above 12' while working from ladders, scaffolding and/or man lifts.
Able to work at a variety of levels (ex. waist, eye, overhead).
Demonstrate the ability to make use of required tools and equipment in a safely appropriate manner.
Demonstrate good balance while working on uneven surfaces and maneuvering obstacles.
Possess sufficient handgrip and coordination to carry and operate tools and equipment.
Ability to utilize personal protective equipment (hardhat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards.
Ability to withstand cold and hot temperatures.
Ability to enter 18" x 36" openings and work in confined spaces for prolonged intervals of time.
Able to respond to verbal and audible sounds/commands
Able to utilize adequate visual skills.
Ability to achieve full arm extension while reaching overhead, reaching out, reaching to the side, and reaching down.
Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers.
While performing the duties of this job, the employee should expect to encounter exposure to humid conditions, bright flashing lights, moving mechanical parts, high precarious places, outside weather conditions, and extreme heat.
The employee should expect to encounter, on occasion, exposure to fumes and/or airborne particles at or below the PEL, toxic or caustic chemicals, and heat and cold.
The noise level in the work environment is usually very loud, + 90 dB.
Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks.
18 years of age or older at time of application
Able to provide proof of US Person Status
No felony convictions of Theft/Deception or Violent crimes within seven years from disposition date
No felony convictions of Drug crimes within three years from disposition date
Willing to submit to a drug screen
Willing to submit to a background check

SmartExplore AI is experimental.

Apply Directly

Mechanical Assembler 1

Collins Aerospace

Foley, AL 36535

~ 58 min OnsiteUrgently HiringFlexible ScheduleEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

HS Diploma or GED
Minimum Of 1 Year Experience In Mechanical Assembly Or Related Field
Ability To Interpret And Understand Technical Drawings And Instructions
Knowledge Of Basic Hand And Power Tools, Including Torque Wrenches And Pneumatic Tools
Strong Attention To Detail And Ability To Work Efficiently In A Fast-Paced Production Environment
U.S. Person is required (U.S. Citizens, U.S. Nationals, U.S. permanent residents, or individuals granted refugee or asylee status in the U.S.)

SmartExplore AI is experimental.

Apply Directly

Mechanical Assembler I

Collins Aerospace

Foley, AL 36535

~ 58 min OnsiteUrgently HiringFlexible ScheduleEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

Typically requires HS diploma (or equivalent, e.g. G.E.D. in the US) or vocational/technical education in related discipline.
Must be authorized to work in the U.S. without the company's immigration sponsorship now or in the future.
The company will not offer immigration sponsorship for this position.
Lift and carry up to 20 pounds.
Able to work in a standing position up to a minimum of 8 hours per day.

SmartExplore AI is experimental.

Apply Directly

Pipe Welding Instructor - Austal

General Dynamics Electric Boat

Mobile, AL 36695

Onsite

High school diploma or equivalent
4+ years of welding trade experience
2+ years of work experience at Electric Boat
Instructing/teaching experience (formal or informal)
Leadership experience (working leader, MDU, SS ...ETC)
Must complete and maintain NDT requirements for Welding Qualifications

SmartExplore AI is experimental.

Apply Directly

Mechanical Assembly 1 (Onsite)

RTX

Foley, AL 36535

~ 58 min OnsiteFlexible ScheduleEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

U.S. Citizen, U.S. Person, or Immigration Status Requirements: Must be authorized to work in the U.S. without the company's immigration sponsorship now or in the future. The company will not offer immigration sponsorship for this position. The company will not seek an export authorization for this role.
Typically requires HS diploma (or equivalent, e.g. G.E.D. in the US) or vocational/technical education in related discipline.
Lift and carry up to 20 pounds.
Able to work in a standing position up to a minimum of 8 hours per day.
1st Shift (6:30am - 3pm) Monday -Friday

SmartExplore AI is experimental.

New, Posted 6 hours ago

Apply Directly

Primary Care, Once called the Paris of the South

Veterans Health Administration

Coden, AL 36523

New, Posted 1 day ago

Apply Directly

HVAC Truck Based Journeyman Mechanic (union)

Johnson Controls

Mobile, AL 36695

$35.20/hr

Onsite

Must be a member or willing to join the United Association of Journeymen and Apprentices of the Plumbing and Pipe Fitting Industry of the United States and Canada, AFL-CIO.
Minimum of Three (3) years Commercial and/or industrial, mechanical troubleshooting experience in the HVAC industry. This includes Rooftop units, pumps, fans, towers, boilers, chillers, compressors, plumbing.
Mechanical shaft alignment using dial indicators, etc. of pumps, fans, Compressors.
Able to use vibration equipment to trouble shoot drivelines.
Travel maybe required 10% to 20% to support Branch Customers activities, trouble shooting, installation and repair.
You will be required to pass a knowledge examination to assess proficiencies.
Opportunity to invest in career development. You will enroll in training programs to gain knowledge in HVAC products and sales quoting.
Prioritize safety in all forms
Universal EPA refrigerants license
Applicable state or local licensing
Valid driver's license

SmartExplore AI is experimental.

Recommended

Easy Apply