Jobs2Careers logoHome

Process Safety Engineering

Houston,TX

860 Process Safety Engineering jobs in Houston,TX

Apply Directly
Process Engineer

Curtiss-Wright

Houston, TX 77084

OnsitePaid Time OffRetirement Benefit

  • Process Engineer
  • Houston (Pearland) team
  • Location: Houston, TX
  • Salary: $75,000-$90,000
SmartExplore AI is experimental.
View now
Recommended
Apply Directly
Quality Inspector — Machined Components & GD&T

NOV

Houston, TX 77041

OnsiteUrgently HiringPaid Time OffRetirement Benefit

  • High school diploma, GED, or equivalent combination of education and experience
  • Minimum of 3- years Assembly/Mechanical/Receiving inspection experience
  • Must be able to read and write in English
  • Knowledge in reading and interpreting engineering drawings, material specification and requirements
  • Pass the J2 Color and Acuity eye test
  • Exposed to loud noise while in the warehouse
  • Exposed to moving parts while on the shop floor
  • Exposed to occasional hot and /or cold weather depending on outside climate conditions and warehouse temperature since the shop floor is neither air conditional nor heated
  • Limited (5% or less) travel
  • Work in warehouse/shop floor environment setting 75% or the day, 25% of the day is spent at a computer in an office
SmartExplore AI is experimental.
View now
Recommended
Apply Directly
Quality Inspector

NOV

Houston, TX 77041

OnsiteUrgently Hiring

  • Verify dimensional accuracy of components using a wide range of precision measurement tools (calipers, micrometers, dial indicators, bore gauges, height gauges, thread gauges, surface roughness testers, etc.)
  • Verify supplier documentation for accuracy, completeness, and compliance with applicable requirements.
  • Perform First Article Inspections (FAI), in-process inspections, and final product evaluations.
  • Review inspection records received for compliance
  • Prepare inspection reports and maintain files of inspection documents
  • Support Engineering with dimensional analysis and product disposition.
  • Interpret and apply engineering drawings, tolerances, and GD&T; requirements for complex components
  • Document Nonconformance Reports (NCRs) upon identification of nonconforming products and promptly notify relevant stakeholders.
  • Maintain metrology equipment and ensure compliance with calibration requirements.
  • Adhere to company HSE policies and report unsafe conditions or incidents promptly
SmartExplore AI is experimental.
View now
Recommended
Apply Directly
Quality Control Specialist

ABB

Houston, TX 77084

HybridUrgently Hiring

  • Minimum 10 years of experience in electrical construction, quality assurance, commissioning, field engineering, or a related industrial role.
  • Strong knowledge of the National Electrical Code (NEC) and electrical installation best practices.
  • Experience interpreting electrical drawings, one-line diagrams, wiring schematics, layout drawings, and construction documentation.
  • Experience performing field quality inspections and documenting inspection results.
  • Familiarity with industrial electrical equipment, control systems, switchgear, motor control centers (MCCs), and power distribution systems.
  • Experience with medium voltage power projects up to 35kV.
  • Strong understanding of electrical testing procedures including insulation resistance, contact resistance, VLF, hi-pot, partial discharge, etc.
  • Experience reviewing and managing redline drawings and construction documentation.
  • Strong understanding of installation testing, inspection records, turnover documentation, and project closeout requirements.
  • Excellent communication and interpersonal skills with the ability to work effectively with customers, contractors, engineers, and project teams.
  • Strong organizational skills with the ability to manage multiple projects and priorities simultaneously.
  • Ability to travel extensively (approximately 50-75%) throughout the United States and occasionally internationally as project requirements dictate.
  • You are currently authorized to work permanently in the United States.
SmartExplore AI is experimental.
View now
Apply Directly
Manufacturing Engineering Manager

Amot Controls Corporation

Houston, TX 77064

Onsite

  • Bachelor's degree in Electrical, Mechanical, or Manufacturing Engineering
  • 7-10 years of progressive manufacturing/process engineering experience, including direct ownership of NPI and new process/test set-up
  • Electronics or electro-mechanical assembly and test experience required - actuators, motors, PCB/harness assemblies, or comparable electro-mechanical products
  • Experience in a high-mix, low-volume industrial manufacturing environment required
  • Demonstrated experience designing manufacturing layouts and test fixtures/equipment for new products
  • Strong working knowledge of Lean manufacturing and continuous improvement methodologies (5S, Kaizen, standard work, root-cause problem solving)
  • Working knowledge of electronic components, wiring/harnessing, and electrical test methods; able to read schematics and troubleshoot electro-mechanical assemblies
  • Experience managing supplier relationships and resolving supplier quality/process issues tied to new designs
  • Detailed knowledge in job traveler and routing setup principles
  • Ability to read, analyze, and interpret engineering drawings, technical specifications, and governmental regulations
  • Ability to respond to common inquiries from customers, suppliers, or members of the business community
  • Ability to effectively present information to management and cross-functional stakeholders
  • Ability to apply mathematical and statistical concepts to process capability analysis, including Cpk/Ppk calculations, statistical process control, and yield/cycle-time analysis
  • Proficient in using Microsoft Office applications, ERP/MRP platforms, and CAD or statistical software
  • Proven problem-solving ability
  • Knowledge of electro-mechanical actuator design and manufacturing
  • Knowledge of machining and assembly processes
  • Knowledge of the valve/flow control industry
  • Physical ability to stand, walk, sit, reach with hands and arms, talk or hear, and use hands and fingers to handle and feel; occasional lift up to 35 pounds
  • Travel domestically up to 10%
SmartExplore AI is experimental.
View now
Apply Directly
Manual Machinist

ITT Cannon LLC

Stafford, TX 77477

~ 23 min OnsiteHealth InsurancePaid Time OffRetirement Benefit

  • Strong experience operating large Horizontal Boring Mills (HBM) and Vertical Turret Lathes (VTL).
  • Advanced knowledge of manual machining practices and machine tool operation.
  • Ability to read and interpret engineering drawings, GD&T; symbols, and technical specifications.
  • Thorough understanding of machining tolerances, fits, and precision measurements.
  • Ability to independently determine machining methods and sequences for repair and manufacturing work.
  • Strong troubleshooting and problem-solving skills.
  • Ability to safely handle and machine large, heavy components.
  • Strong organizational and time management skills.
  • Ability to work independently with minimal supervision.
  • Effective communication and teamwork skills.
  • Basic computer skills for documentation and job tracking.
  • Minimum 7-10 years of manual machining experience in a repair, manufacturing, or job shop environment.
  • Minimum 5 years of experience operating Horizontal Boring Mills (HBM).
  • Minimum 5 years of experience operating Vertical Turret Lathes (VTL).
  • Overhead crane and rigging experience preferred.
  • High School Diploma or GED preferred (or equivalent experience)
  • Journeyman Machinist certification considered a plus.
SmartExplore AI is experimental.
View now
Apply Directly
Production Support (Coating Application)

The Timken Company

Houston, TX 77032

Onsite

  • High School Diploma or GED and must be able to work in USA
  • Basic math, geometry, and mechanical aptitude
  • Basic measurement and print-reading skills
  • Ability to lift to 50 pounds or more
  • Prolonged standing and walking
  • Repetitive movement, lifting, pushing, and pulling
SmartExplore AI is experimental.
View now
Apply Directly
Machinist

Celeros Flow Technology

Houston, TX 77041

$30-$34/hr
OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

  • MACHINIST - 2ND SHIFT
  • Location: Houston, Westplain Campus
  • Work Environment: Monday - Friday onsite - 2nd shift
  • Rate of Pay: $30-$34/hour based on years of experience, plus quarterly bonus
  • 2ND SHIFT - Shift Differential $2.50/hour Hours: 1:30pm-10:00pm
  • The Machinist produces machined parts by setting up and operating a computer numerical control (CNC) machine, maintaining quality and safety standards, keeping records and maintaining equipment and supplies. You'll work collaboratively with other multi-skilled technicians under the direction of the Shop Supervisor.
  • Setting up and operating various machines and tools on a 3 or 4 axis CNC.
  • Reading and interpreting work orders to select proper work center and identify required tooling and/or programs necessary to perform the operation.
  • Listen to machining operation in order to detect sounds such as those made by dull cutting tools or excessive vibration and compensate for problems.
  • Obtaining and installing proper tooling, such as jaws, chucks, tombstones, fixtures, and cutting tools.
  • Using various gauges and precision instruments (i.e. intra-mics, profilometers for finish surface requirements, calipers, IDOD micrometers, indicators, and special gaging equipment, etc.) to inspect production pieces to make necessary program and tooling adjustments.
  • Cleaning and removing burrs after the operation is completed.
  • Assisting manufacturing engineering in process improvements.
  • Training other employees on a variety of machine tools and operations.
  • Returning tooling and reporting any difficulties with tooling or material.
  • Train/Mentor lower-level CNC machinists.
  • Maintain continuity among shifts by documenting and communicating actions taken thus far as well as any necessary further step
  • Read, write, speak and comprehend English.
  • Add, subtract, multiply, divide and work with fractional measurements and decimals.
  • Set up, adjust, and operate all machine tools in your area of responsibility in order to produce various parts within specifications from blueprints.
  • Read and understand manufacturing mechanical blueprints, and use good basic math skills in addition, subtraction, division and multiplication.
  • Work accurately with basic keyboard and monitor interfaced with the mainframe computer to enter work order data and correct qualities as required.
  • Hold very close tolerances and surface finish requirements.
  • Exceptional teamwork skills and strong communication abilities.
  • Working knowledge or ability to learn to use a micrometer, depth micrometer, dial indicators, CMM, and other precision measuring instruments.
  • A demonstrated history of good attendance and a safe work record.
  • Maintain conscientious work behaviors including work ethic, safety standards, quality, costs, and On-Time Delivery (OTD)
  • A high school diploma or GED equivalent.
  • 5+ years of manual machining working with CNC lathes, mills and surface grinders.
  • The ability to read and interpret drawings, blueprints and other documents.
  • Proficiency with measuring equipment, such as calipers, gauges and micrometers.
  • Computer proficiency.
  • Experience working with stainless steel or duplex stainless steel preferred.
  • CNC Horizontal mill experience preferred.
  • Lean manufacturing methods preferred.
  • Able to work quickly and efficiently through Process Improvement structure; Good verbal and written communication; Strong attention to detail and accurate record keeping
SmartExplore AI is experimental.
View now
Recommended
Apply Directly
Safety Coordinator

Fairbanks Morse Defense

Houston, TX 77084

Onsite

  • High school diploma or General Education Development (GED) credential required.
  • Basic understanding of workplace safety practices or an interest in learning OSHA requirements.
  • Basic math skills.
  • Willingness and ability to learn company safety procedures, regulatory requirements, and documentation practices.
  • Clear verbal and written communication skills.
  • Comfortable speaking with individuals and small groups and developing the ability to facilitate training.
  • Approachable, professional, and willing to ask questions and seek guidance.
  • Strong attention to detail and organizational skills.
  • Ability to manage multiple assignments and meet deadlines with direction from the EHS Director.
  • Ability to work effectively with employees at different levels of the organization.
  • Basic mechanical aptitude or an interest in learning about service and shipyard operations.
  • Basic computer proficiency, including the ability to learn and use Microsoft Excel, PowerPoint, Word, and other company systems.
  • Must be able to wear personal protective equipment (PPE), including safety shoes, safety glasses, gloves, hearing protection, and additional equipment as required.
  • Correctable eyesight is required.
  • Must be comfortable working around moving equipment and machinery.
  • Must be able to climb ladders and stairs.
  • Frequent bending, stooping, kneeling, forward reaching, and twisting.
  • Occasional squatting, crouching, and above-shoulder reaching.
  • Ability to stand for extended periods.
SmartExplore AI is experimental.
View now
Recommended
Apply Directly
Technical Safety Advisor

Safety Consultants USA

Houston, TX 77002

Profile builder
Answer questions related to your search and surface your matches.
Browse Jobs
  • Jobs in Top Cities
  • Jobs by State
  • Jobs by Title
  • Jobs by Category
Tools
  • Free Resume Builder
  • Jobs2Careers+ Extension
Company
  • Post a Job
  • About
  • Advice
  • Contact
Jobs2Careers Powered by Talroo© 2026 Jobs2Careers
Logos provided by Logo.dev
© 2026 Jobs2Careers
Privacy PolicyTerms of UseYour Privacy ChoicesCalifornia Consumer Privacy Act (CCPA) Opt-Out Icon
Jobs2Careers Powered by Talroo