252 Assembly Technician 2nd Shift jobs in Franklin,PA

Recommended

Apply Directly

2nd & 3rd Shift Processor/Assembler/Production - Forks Township, PA

Victaulic

Franklin, PA

OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

2nd Shift 2:00 pm - 10:25 pm
3rd Shift 10:00 pm - 6:20 am
Shift times are subject to change
Employees must be willing to work in excess of 8 hours in one shift
Overtime: Employees must be willing and available to work weekends on an on-going basis if needed
Overtime will paid for all hours worked in excess of forty hours in any one week
The noise level is such that earplugs must be worn at all times
Personal protective equipment must be worn at all times (ex. hard hat, safety glasses, ear plugs, and steel toe shoes)
Safety equipment is provided by the Company with exception of steel toe shoes, which must be provided by employee upon the first day of employment

SmartExplore AI is experimental.

Apply Directly

2nd Shift Large Lathe Machine Operator

Grand Valley Manufacturing

Titusville, PA 16354

~ 31 min OnsiteFlexible ScheduleHealth InsurancePaid Time OffRetirement Benefit

Requires a High School Diploma or GED Equivalent
Monday - Friday, 3pm - 1am
Executive schedule: 40-55 hours full-time week
Must be able to work a flexible schedule
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions
Duties may be changed, or additional duties assigned
The 2nd Shift Large Lathe Operator will be responsible for the correct setup and operation of Large CNC or Manual Lathes up to 84" diameter and 67' long
Minimum of 5-10 Years of CNC Machining Experience preferred or equivalent combination of education and experience
Technical degree in Machining preferred
Experience moving large parts with an overhead crane (preferred)

SmartExplore AI is experimental.

Recommended

Apply Directly

2nd Shift QC Inspector - Bldg. 51

Grand Valley Manufacturing

Titusville, PA 16354

~ 31 min OnsiteFlexible Schedule

High school Diploma or GED required
Minimum of 2-5 years in a manufacturing setting, preferably in an inspection role or related field.
Occasionally exposed to fumes and/or airborne particles.
Required to wear eye, foot, and/or other personal protective equipment while performing duties.
May on a frequent basis squat, climb, push/pull objects, lift up to 25 lbs., and use hands/fingers for grasping and reaching.
May on an occasional basis bend at the waist; reach above the shoulder; turn or twist body; lift up to 50 lbs.; carry up to 35 lbs.; and use hands/fingers for fine manipulation.
The noise level in the work environment is usually medium to loud.
Must be able to work a flexible schedule.

SmartExplore AI is experimental.

Apply Directly

Off-Shift Assembly 1

Wabtec

Grove City, PA 16127

~ 29 min Onsite

Must be 18 years of age
Must have a high school diploma, GED or GED equivalent, or a minimum of 8 years of experience
Ability to work on 2nd or 3rd shift, scheduled overtime and occasional weekends as necessary
Wabtec will only employ those who are legally authorized to work in the U.S.
Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable) and fitness for duty test (as applicable)
Must be able to wear personal protective equipment (Example: safety glasses, gloves, earplugs and steel-toed boots)
Walking, climbing, stooping, bending, lifting, and using hand tools
Must be able to work in a tobacco free environment

SmartExplore AI is experimental.

Recommended

Easy Apply

Assembler/ Grinder

Adecco

Meadville, PA 16335

$20/hr

~ 37 min OnsiteHealth InsurancePaid Time OffRetirement Benefit

1+ year experience in manufacturing, assembly, or grinding preferred
Ability to read a tape measure and basic prints
Experience using grinders, sanders, and hand tools
Starting pay is $20 an hour

SmartExplore AI is experimental.

Apply Directly

Machine Operator I - GC

ELLWOOD Groups

Grove City, PA 16127

~ 29 min OnsiteHealth InsurancePaid Time OffRetirement Benefit

High School Diploma/GED
The ability to manage a very physical job including heavy lifting and pulling
A clean criminal background investigation
A clean urine drug screening, performed upon offer of employment
Set up and operate machine selecting proper feeds and speeds
Load and unload machine with the aid of an overhead crane, positioning material as required
Remove scale and chips from material and around mills manually when necessary
Set up, select and change tooling and operate test equipment as necessary
Check identification on all material handled by stamping or marking with necessary numbers
Move material to next area of operation as required and attach proper color tag
Complete required production reports and use computer terminal
Put all tooling and blocking for operation of machine in proper location
Grind all sharp edges after milling with a hand grinder to ensure blocks are safe for future operations
Assist in loading and unloading trucks
Empty self-dumping chip hoppers into the roll offs
Hook up and operate overhead crane and forklift in moving empty and filled scrap boxes to areas as needed
Assist in maintenance or production work as required
Assist in environmental clean-up as required
Perform work in accordance with ECFG's AS9100/ISO 9001 Quality Management System
At times the employee may be required to perform testing in accordance with ISO 17025, NADCAP or other Standards
During testing the employee is considered to be a part of Quality and shall not be pressured by outside influences
Report defective material and faulty equipment to the supervisor immediately
Lubricate equipment and perform minor maintenance as necessary
Advise supervisor of all tooling/heads needing repair or replacement
Maintain working area in a clean, orderly and safe condition
Train new operators
Observe all safety rules and regulations
Perform monthly Behavior Based Safety Observations
Attend all required meetings and trainings
Be aware of and report all injuries, near misses and hazards to the supervisor/safety department
Be mindful of safe working practices
Comply with all safety programs, policies and procedures
Use stop work authority when an unsafe condition or act arises
Perform all other duties as required

SmartExplore AI is experimental.

Recommended

Apply Directly

1st Shift Quality Control Technician - Forks Township, PA

Victaulic

Franklin, PA

OnsiteEducation AssistanceHealth InsuranceRetirement Benefit

High School graduate, or equivalent.
Read and understand engineering procedures, drawings, dimensions, and tolerances.
Have a basic knowledge of algebra, geometry, and trigonometry.
Capable of accurately using calipers, micrometers, optical comparator, hardness test equipment, and other precision variable gauges.
Capable of using a computer.
Capable of working independently, with minimal supervision.

SmartExplore AI is experimental.

Apply Directly

Machine Shop Operator

Channellock

Meadville, PA 16335

$18-$21/hr

$500 bonus

~ 37 min OnsiteHealth InsurancePaid Time Off

Set-Up:
Make exact and concise set-up on all machines within the work cell.
Remove and replace tooling as required for a variety of parts.
Perform precision set-ups involving alignment and securing of fixtures, setting speeds and feeds and various other parameters according to the part to be produced and the machine to be used.
On initial set-up use precontrolled set-up procedures.
Precision measuring instruments such as micrometers and dial indicators must be used.
Work with the CNC control panel.
Perform Production Run:
Place part in holding fixture and clamp in place, start machine by push button, foot pedal or lever.
Unclamp and remove part when machine completes operations.
Deburr part, assemble parts, weld rivet, Double Disc, Notch the nose, and repeat the cycle.
Check parts with gauges provided and record finding on charts.
Make all adjustments necessary to ensure parts stay within specified control limits.
Simultaneous set-up and operation of multiple machines is required due to long cycle times.
Keep coolant and oil levels at the proper levels and concentrations.
After hardening is done, check handle alignment and straighten if needed.
Check joint tensions and adjust as needed.
Weigh gage as needed.
Check handle spread and gage as needed.
Check nose gap and gage as needed.
Rope cut pliers following standard procedures.
Re-file as needed.
Needle Nose pliers must have the nose adjusted to meet Quality standards.
Cell operators will be required to learn all of the jobs that are performed within the work cell.
Complete appropriate paperwork and maintain 5S requirements.

SmartExplore AI is experimental.

Recommended

Easy Apply

Line Tech

RGS Products

Cochranton, PA 16314

~ 25 min OnsiteHealth InsurancePaid Time OffRetirement Benefit

Ability to work in a fast-paced manufacturing environment
Strong attention to detail and commitment to quality
Ability to follow verbal and written instructions
Reliable attendance and punctuality
Stand, walk, and move throughout the facility for the duration of a shift (8–10+ hours)
Lift and carry parts or materials up to 50 lbs. regularly; heavier loads with assistance
Reach, bend, stoop, and work in confined or awkward positions as required
Work in hot environments near ovens and spray booths
Wear all required personal protective equipment (gloves, respirator, safety glasses, etc.)
Indoor industrial/manufacturing facility
Exposure to powder coating chemicals, fumes, heat, and noise — PPE required

SmartExplore AI is experimental.

Apply Directly