226 Assembler Grinder jobs in Franklin,PA

Recommended

Apply Directly

2nd & 3rd Shift Processor/Assembler/Production - Forks Township, PA

Victaulic

Franklin, PA

OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

2nd Shift 2:00 pm - 10:25 pm
3rd Shift 10:00 pm - 6:20 am
Shift times are subject to change
Employees must be willing to work in excess of 8 hours in one shift
Overtime: Employees must be willing and available to work weekends on an on-going basis if needed
Overtime will paid for all hours worked in excess of forty hours in any one week
The noise level is such that earplugs must be worn at all times
Personal protective equipment must be worn at all times (ex. hard hat, safety glasses, ear plugs, and steel toe shoes)
Safety equipment is provided by the Company with exception of steel toe shoes, which must be provided by employee upon the first day of employment

SmartExplore AI is experimental.

Apply Directly

Off-Shift Assembly 1

Wabtec

Grove City, PA 16127

~ 29 min Onsite

Must be 18 years of age
Must have a high school diploma, GED or GED equivalent, or a minimum of 8 years of experience
Ability to work on 2nd or 3rd shift, scheduled overtime and occasional weekends as necessary
Wabtec will only employ those who are legally authorized to work in the U.S.
Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable) and fitness for duty test (as applicable)
Must be able to wear personal protective equipment (Example: safety glasses, gloves, earplugs and steel-toed boots)
Walking, climbing, stooping, bending, lifting, and using hand tools
Must be able to work in a tobacco free environment

SmartExplore AI is experimental.

Recommended

Easy Apply

Line Tech

RGS Products

Cochranton, PA 16314

~ 25 min OnsiteHealth InsurancePaid Time OffRetirement Benefit

Ability to work in a fast-paced manufacturing environment
Strong attention to detail and commitment to quality
Ability to follow verbal and written instructions
Reliable attendance and punctuality
Stand, walk, and move throughout the facility for the duration of a shift (8–10+ hours)
Lift and carry parts or materials up to 50 lbs. regularly; heavier loads with assistance
Reach, bend, stoop, and work in confined or awkward positions as required
Work in hot environments near ovens and spray booths
Wear all required personal protective equipment (gloves, respirator, safety glasses, etc.)
Indoor industrial/manufacturing facility
Exposure to powder coating chemicals, fumes, heat, and noise — PPE required

SmartExplore AI is experimental.

Apply Directly

Machine Operator I - GC

ELLWOOD Groups

Grove City, PA 16127

~ 29 min OnsiteHealth InsurancePaid Time OffRetirement Benefit

High School Diploma/GED
The ability to manage a very physical job including heavy lifting and pulling
A clean criminal background investigation
A clean urine drug screening, performed upon offer of employment
Set up and operate machine selecting proper feeds and speeds
Load and unload machine with the aid of an overhead crane, positioning material as required
Remove scale and chips from material and around mills manually when necessary
Set up, select and change tooling and operate test equipment as necessary
Check identification on all material handled by stamping or marking with necessary numbers
Move material to next area of operation as required and attach proper color tag
Complete required production reports and use computer terminal
Put all tooling and blocking for operation of machine in proper location
Grind all sharp edges after milling with a hand grinder to ensure blocks are safe for future operations
Assist in loading and unloading trucks
Empty self-dumping chip hoppers into the roll offs
Hook up and operate overhead crane and forklift in moving empty and filled scrap boxes to areas as needed
Assist in maintenance or production work as required
Assist in environmental clean-up as required
Perform work in accordance with ECFG's AS9100/ISO 9001 Quality Management System
At times the employee may be required to perform testing in accordance with ISO 17025, NADCAP or other Standards
During testing the employee is considered to be a part of Quality and shall not be pressured by outside influences
Report defective material and faulty equipment to the supervisor immediately
Lubricate equipment and perform minor maintenance as necessary
Advise supervisor of all tooling/heads needing repair or replacement
Maintain working area in a clean, orderly and safe condition
Train new operators
Observe all safety rules and regulations
Perform monthly Behavior Based Safety Observations
Attend all required meetings and trainings
Be aware of and report all injuries, near misses and hazards to the supervisor/safety department
Be mindful of safe working practices
Comply with all safety programs, policies and procedures
Use stop work authority when an unsafe condition or act arises
Perform all other duties as required

SmartExplore AI is experimental.

Apply Directly

Remodel Merchandiser

SPAR Group

Greenville, PA 16125

$20/hr

~ 50 min Onsite

Must live within 45 miles of Greenville, PA
Ability to stand a minimum shift of 8 hours
Must be able to take direction regarding tagging, rotating and placing products on shelf
Ability/Willingness to work Overnight shift
Knowledge/ability to use basic tools necessary for the job
Ability to work in Team environment
Reliable transportation, valid driver's license
Personal cell is required and valid email address.
Professional appearance and demeanor
Steel toed footwear is required to be worn on job site

SmartExplore AI is experimental.

Apply Directly

Machine Shop Operator

Channellock

Meadville, PA 16335

$18-$21/hr

$500 bonus

~ 37 min OnsiteHealth InsurancePaid Time Off

Set-Up:
Make exact and concise set-up on all machines within the work cell.
Remove and replace tooling as required for a variety of parts.
Perform precision set-ups involving alignment and securing of fixtures, setting speeds and feeds and various other parameters according to the part to be produced and the machine to be used.
On initial set-up use precontrolled set-up procedures.
Precision measuring instruments such as micrometers and dial indicators must be used.
Work with the CNC control panel.
Perform Production Run:
Place part in holding fixture and clamp in place, start machine by push button, foot pedal or lever.
Unclamp and remove part when machine completes operations.
Deburr part, assemble parts, weld rivet, Double Disc, Notch the nose, and repeat the cycle.
Check parts with gauges provided and record finding on charts.
Make all adjustments necessary to ensure parts stay within specified control limits.
Simultaneous set-up and operation of multiple machines is required due to long cycle times.
Keep coolant and oil levels at the proper levels and concentrations.
After hardening is done, check handle alignment and straighten if needed.
Check joint tensions and adjust as needed.
Weigh gage as needed.
Check handle spread and gage as needed.
Check nose gap and gage as needed.
Rope cut pliers following standard procedures.
Re-file as needed.
Needle Nose pliers must have the nose adjusted to meet Quality standards.
Cell operators will be required to learn all of the jobs that are performed within the work cell.
Complete appropriate paperwork and maintain 5S requirements.

SmartExplore AI is experimental.

Apply Directly

Mac Tools Route Sales - Full Training

Mac Tools

Oil City, PA 16301

Urgently HiringFlexible Schedule

Strong credit profile
Initial down payment
Financial strength is a key factor in our franchise approval process

SmartExplore AI is experimental.

New, Posted 9 hours ago

Recommended

Apply Directly

Programming JOB Training Program

Year Up United

Franklin, PA 16323

$525/wk

Onsite

A high school graduate or GED recipient
Eligible to work in the U. S.
Available Monday-Friday throughout the duration of the program
Highly motivated to learn technical and professional skills
Have not obtained a Bachelor's degree
You may be required to answer additional screening questions when applying

SmartExplore AI is experimental.

Apply Directly

1st Shift QC Inspector - Bldg. 51

Grand Valley Manufacturing

Titusville, PA 16354

~ 31 min OnsiteFlexible Schedule

High school Diploma or GED required
Minimum of 2-5 years in a manufacturing setting, preferably in an inspection role or related field.
May on a frequent basis squat, climb, push/pull objects, lift up to 25 lbs., and use hands/fingers for grasping and reaching.
May on an occasional basis bend at the waist; reach above the shoulder; turn or twist body; lift up to 50 lbs.; carry up to 35 lbs.; and use hands/fingers for fine manipulation.
Required to wear eye, foot, and/or other personal protective equipment while performing duties.

SmartExplore AI is experimental.

Recommended

Apply Directly