1033 Shift Material jobs in Cudahy,WI

Apply Directly

Machine Operator 3rd Shift Plus $2.00 Shift Premium - $5,000 Sign on Bonus

Brady Corporation

Milwaukee, WI 53223

$5,000 bonus

~ 21 min Onsite

Machine Operator
3rd Shift
Must follow Schedule Boards or Hour by Hour boards
Print and produce product to match order specification
Hand finish (i.e. laminating, stack cutting, sheeting) as required
Perform final pre-run inspection of job, quality checks during the run, and job completion, meeting quality and quantity standards
Perform all required preventive maintenance of applicable equipment
Handle and dispose of hazardous materials and chemicals (i.e. inks, cleaning solvents, etc.) according to procedures
Work from standard work, written instructions, and established procedures to complete assigned tasks
Address and resolve routine inquiries and problems, referring the more complex issues to the supervisors
Interact with different shifts to provide updates on current jobs, issues, or updates

SmartExplore AI is experimental.

New, Posted 11 hours ago

DiversityJobs

Material Handler - 1st shift

KAPCO

Grafton, WI 53024

No Experience

New, Posted 11 hours ago

Recommended

DiversityJobs

Test Material Processor

ATI

Cudahy, WI 53110

New, Posted 11 hours ago

DiversityJobs

Material Handler - 2nd Shift

Inpro Corporation

Muskego, WI 53150

$1,000 bonus

Apply Directly

Production Support Operator - 1st Shift

Eaton Aerospace

Waukesha, WI 53188

$23.15/hr

~ 40 min OnsiteUrgently HiringEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

No relocation benefit is being offered for this position. Only candidates within a 50-mile radius of the work location will be considered.
Active-duty military Service member candidates are exempt from the geographical area limitation.
A high school diploma or GED equivalent from an accredited institution.

SmartExplore AI is experimental.

Apply Directly

Machine Operator Night Shift - $2.00 Shift Premium - $5,000 Sign on Bonus

Brady Corporation

Milwaukee, WI 53201

$5,000 bonus

~ 21 min Onsite

Operating equipment
Weighing and mixing raw materials following batch instructions
Work with hazardous materials utilizing engineering controls and PPE
Perform production equipment set up, clean up, safe operation, & operator level maintenance of assigned equipment
Identify & maintain quality standards while meeting daily & weekly production goals
Understand & follow established standard work documents
Perform adjustments to production equipment as necessary
Communicate production performance to appropriate leaders & departments
Adhere to Brady's attendance, safety, & other company policies
Maintain general housekeeping & clean production areas at end of every shift
Provide support within other production areas as needed & other duties as assigned

SmartExplore AI is experimental.

Apply Directly

Machine Operator

Stryten Energy

Milwaukee, WI 53212

$19.56/hr

~ 21 min OnsiteUrgently Hiring

High school diploma or GED equivalent
Must be eligible to work in the United States
Proficient in English (ready, writing & verbal skills)
Ability to stand up to four hours at a time
Must be able to handle large work. (35lbs. Minimum)
Able to bend at the waist (or w/knee) frequently
Walking frequently at workstation and between workstation and packing
General verbal, written and math skills of adding, subtracting three (3) digit numbers required
Must embrace and follow the Core Beliefs and Values of Stryten Energy
Safety is our overriding priority. If an unsafe condition is found to exist, actions must be taken immediately to correct the situation to keep all team members safe and get manufacturing equipment operational as soon as possible
Maintains press cycle necessary for quality parts and production standards
Keeps materials at adequate level for job. Assures label accuracy
Keeps accurate production records. Completes labels properly
Advises Supervisor of production problems, relays information to replacement operators regarding work status. During the shift, reports to workstation in timely manner, leaves station only when relieved or with Supervisor permission
Visually inspects parts according to control plan, (i.e., shorts, flash, stress, damage, etc.)
Reports rejects as soon as possible to Quality Coordinator, Supervisor or as required on the control plan
Performs dielectric test and other tests as required
Uses attribute gauges to determine any non-conformance.Inspects for missing and damaged bushings
Place inspection tag on pallet of painted (coated) lead after successfully coating lead per the control plan; this tag signifies that the lead is approved to be used in injection molding
Maintains housekeeping and cleanliness of the production department as instructed by management as well as press upkeep as assigned
Reports unsafe conditions to the Supervisor for immediate action
Must complete all required hazardous waste training and comply with all Stryten hazardous waste and handling procedures
The above list of responsibilities describes normal work, but the Supervisor may assign this person to duties not listed when production requirements dictate or when there is not enough work in the regular classification to fill out the workday
Responsible for the development and implementation of manufacturing methods ensuring the highest quality, lowest cost, lowest scrap and optimum capacity
Attend all Management meetings and training sessions, safety committee meetings, and all employee meetings as required by upper management
Follow all ISO 9000 requirements including creating and maintaining ISO documents
Other responsibilities as assigned to meet the needs of the business
Apply online or text plantjobs to 678-931-7826 to begin your pre-screening process!

SmartExplore AI is experimental.

New, Posted 1 day ago

Apply Directly

Touch Up Manufacturing Operator: M-F: 1st Shift (8 AM - 4:30 PM)

HENTZEN COATINGS

Milwaukee, WI 53218

$19-$24/hr

~ 21 min OnsitePaid Time OffRetirement Benefit

The successful candidates will have an acceptable score on the math test.
All candidates are subject to post-offer testing: including a job-related pre-employment physical, drug screen, and background check.
Regularly required to communicate verbally and audibly in a manufacturing or operational setting.
Frequently required to stand, walk, and move throughout the work area.
Regular use of hands and fingers to handle, manipulate, and control objects, tools, or equipment.
Required to sit, balance, stoop, and occasionally reach above shoulder level.
Occasional operation of machinery using foot controls
May be required to climb, balance, and reach overhead as part of job duties.
Ability to regularly lift and/or move up to 65 lbs.
Safety shoes, safety glasses, and flame-retardant uniforms or lab coats are required in production areas.
Respirators and ear plugs are required for specific production processes.

SmartExplore AI is experimental.

Apply Directly

Machine Operator A, Cudahy

MicroPrecision

Cudahy, WI 53110

$20-$25/hr

$2,000 bonus

OnsiteUrgently HiringEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

Machine operator experience in a manufacturing environment
Familiar with machine tools and equipment
Strong analytical and mathematical skills
Strong attention to detail
Exhibits the core values of integrity and accountability
Maintain clean and orderly work area, including equipment, and perform all assignments in safe manner
Demonstrates ability to read, write, hear and interpret documents and instructions from both verbal and written English
Ability to lift and carry of up to 50 pounds safely
Regularly required to sit, stand, stoop, crouch and kneel
Vision requirements include (corrective and non) close range, distance, color, peripheral, depth and ability to adjust focus
Comply with all company, safety and quality policies and procedures

SmartExplore AI is experimental.

Easy Apply

(6-1847RA) Production Supervisor 2nd Shift -Cudahy WI

Adecco

Cudahy, WI 53110

$70,000-$75,000/yr

OnsiteUrgently HiringBilingual PreferredHealth InsurancePaid Time OffRetirement Benefit

Bachelor's degree in Business, Manufacturing, or a related field plus 2+ years of leadership experience, or an equivalent combination of education and experience
Previous experience leading, coaching, or supervising employees in a manufacturing environment
Ability to travel up to 5%
Ability to stand and walk for extended periods
Frequently bend, stoop, kneel, reach, and lift up to 50 pounds
Comfortable working in hot, cold, wet, humid, and noisy manufacturing environments around moving equipment

SmartExplore AI is experimental.